Chamfering Drills Brochure Inch (usa)

 

Embed or link this publication

Description

Chamfering Drills Brochure Inch

Popular Pages


p. 1

The ULTIMATE Solid Carbide Indexable Drill with a CHAMFERING Option! NY A S E ID AC REPL ICAL SOL DR E OR N I L Y ILL C ID R B D R L A C EE T S D PEE S H HIG w w w . i s c a r. c o m

[close]

p. 2

CH E AM M ngi FE A nee RI XI red NG M f P e U M or r Modular System: DCNS Drills with CHAMRING Holders The DCNS SUMO UNICHAM drills feature no flange, which enables insertion into the CHAMRING chamfering holders. This modular combination can produce chamfered holes in the diameter range of .295 to 1.020” and L/D ratios of 3xD and 5xD. The projection of the SUMO UNICHAM drill inserted into the CHAMRING holder can be adjusted for various drilling depths in blind- and through-hole applications for standard 30°, 45° and 60° chamfers, by using XCGT inserts. Conventional method fo rm an ce The drill, which uses standard SUMOCHAM drilling heads, is polished and features a wiper along the tool body. This provides improved surface finish and smooth chip evacuation. The CHAMRING chamfering drill holders have been expanded to the diameter range of .827-1.020“. UNI Chamfering Drills SUMO UNICHAM and CHAMRING drills provide the ultimate solution for the chamfered holes operation. Combined drilling and chamfering operations provide true time savings.

[close]

p. 3

for g d re Mnin ee MU ur e gin I l T nc En AXmica rma M ono erfo Ec P Applications for DCNS Drills DCNS body provides a very easy solution for replacement of the solid carbide drills. The drill body has no flange and can be easily mounted in a collet chuck adapter. More economical when compared with the flange-type SUMOCHAM drills. General drilling applications. SUMO UNICHAM in common drilling operations Replaces solid carbide drils without changing any holding components When using SUMO UNICHAM, the drill’s projection can be adjusted Shorter projection compared to SUMOCHAM, when required For better stability in rough applications and interrupted cuts Can be used on multi-spindle applications for close spacing between adjacent drills Moderate Helix High Helix 3

[close]

p. 4

DCNS-3D Indexable Head Drills without a Flange and One Flat Shank, Drilling Depth 3xD, Suitable for Chamfering Holders L1 L4 dh6 Dk7 L Dimensions Designation DCNS 0295-089-031B-3D DCNS 0315-094-031B-3D DCNS 0335-100-035B-3D DCNS 0354-106-035B-3D DCNS 0374-112-039B-3D DCNS 0394-118-039B-3D DCNS 0413-124-043B-3D DCNS 0433-130-043B-3D DCNS 0453-135-047B-3D DCNS 0472-141-047B-3D DCNS 0492-147-051B-3D DCNS 0512-153-051B-3D DCNS 0531-159-055B-3D DCNS 0551-165-055B-3D DCNS 0571-171-059B-3D DCNS 0591-177-059B-3D DCNS 0630-189-063B-3D DCNS 0669-201-066B-3D DCNS 0709-213-070B-3D DCNS 0748-224-074B-3D DCNS 0787-236-078B-3D DCNS 0827-248-082B-3D DCNS 0866-260-086B-3D DCNS 0906-272-090B-3D DCNS 0945-283-094B-3D DCNS 0984-295-098B-3D D min(1) .295 .315 .335 .354 .374 .394 .413 .433 .453 .472 .492 .512 .531 .551 .571 .591 .630 .669 .709 .748 .787 .827 .866 .906 .945 .984 D max .311 .331 .350 .370 .390 .409 .429 .449 .469 .488 .508 .528 .547 .567 .587 .626 .665 .705 .744 .783 .823 .862 .902 .941 .980 1.020 L .89 .94 1.00 1.06 1.12 1.18 1.24 1.30 1.36 1.42 1.48 1.54 1.59 1.65 1.71 1.77 1.89 2.01 2.13 2.24 2.36 2.48 2.60 2.72 2.83 2.95 d .315 .315 .354 .354 .394 .394 .433 .433 .472 .472 .512 .512 .551 .551 .591 .591 .630 .669 .709 .748 .787 .827 .866 .906 .945 .984 L1 1.35 1.37 1.45 1.53 1.59 1.78 1.84 1.91 1.97 2.05 2.11 2.19 2.25 2.33 2.39 2.47 2.74 2.83 2.97 3.09 3.47 3.57 3.71 3.85 3.99 4.13 L4 1.42 1.42 1.42 1.42 1.42 1.61 1.61 1.61 1.61 1.61 1.81 1.85 1.69 1.73 1.77 1.77 1.89 1.89 1.89 2.13 2.13 2.36 2.36 2.36 2.36 2.36 Po. Size 7.0 8.0 8.0 9.0 9.0 1.0 1.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 16.0 17.0 18.0 19.0 2.0 21.0 22.0 23.0 24.0 25.0 Clamping Key K DCN 6-9.99 K DCN 6-9.99 K DCN 6-9.99 K DCN 6-9.99 K DCN 6-9.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 14-17.99 K DCN 14-17.99 K DCN 14-17.99 K DCN 14-17.99 K DCN 14-17.99 K DCN 18-21.99 K DCN 18-21.99 K DCN 18-21.99 K DCN 18-21.99 K DCN 22-26.99 K DCN 22-26.99 K DCN 22-26.99 K DCN 22-26.99 Standard SUMOCHAM heads allow machining ISO-P/M/K material groups. Wide diameter range, from .295 to 1.020” is available. All drills come with through coolant supply for prolonged tool life and safe machining process. No regrinding service is needed due to indexable insert design. SUMOCHAM system features no setup time. P M K N S H ✓ ✓ ✓ 4 ISCAR

[close]

p. 5

for g d re Mnin ee MU ur e gin I l T nc En AXmica rma M ono erfo Ec P DCNS-5D Indexable Head Drills without a Flange and One Flat Shank, Drilling Depth 5xD, Suitable for Chamfering Holders L4 dh6 L L1 Dk7 Dimensions Designation DCNS 0295-148-031B-5D DCNS 0315-157-031B-5D DCNS 0335-167-035B-5D DCNS 0354-177-035B-5D DCNS 0374-187-039B-5D DCNS 0394-196-039B-5D DCNS 0413-206-043B-5D DCNS 0433-216-043B-5D DCNS 0453-226-047B-5D DCNS 0472-236-047B-5D DCNS 0492-246-051B-5D DCNS 0512-256-051B-5D DCNS 0531-265-055B-5D DCNS 0551-275-055B-5D DCNS 0571-285-059B-5D DCNS 0591-295-059B-5D DCNS 0630-315-063B-5D DCNS 0669-335-066B-5D DCNS 0709-354-070B-5D DCNS 0748-374-074B-5D DCNS 0787-394-078B-5D DCNS 0827-413-082B-5D DCNS 0866-433-086B-5D DCNS 0906-453-090B-5D DCNS 0945-472-094B-5D DCNS 0984-492-098B-5D D min(1) .295 .315 .335 .354 .374 .394 .413 .433 .453 .472 .492 .512 .531 .551 .571 .591 .630 .669 .709 .748 .787 .827 .866 .906 .945 .984 D max .311 .331 .350 .370 .390 .409 .429 .449 .469 .488 .508 .528 .547 .567 .587 .626 .665 .705 .744 .783 .823 .862 .902 .941 .980 1.020 L 1.48 1.57 1.67 1.77 1.87 1.97 2.07 2.17 2.26 2.36 2.46 2.56 2.66 2.76 2.85 2.95 3.15 3.35 3.54 3.74 3.94 4.13 4.33 4.53 4.72 4.92 d .315 .315 .354 .354 .394 .394 .433 .433 .472 .472 .512 .512 .551 .551 .591 .591 .630 .669 .709 .748 .787 .827 .866 .906 .945 .984 L1 1.94 2.22 2.12 2.24 2.33 2.57 2.67 2.78 2.88 2.99 3.09 3.21 3.31 3.43 3.53 3.65 4.00 4.17 4.39 4.59 5.04 5.22 5.44 5.66 5.88 6.10 L4 1.42 1.42 1.42 1.42 1.42 1.61 1.61 1.61 1.61 1.61 1.81 1.85 1.69 1.73 1.77 1.77 1.89 1.89 1.89 2.13 2.13 2.36 2.36 2.36 2.36 2.36 Po. Size 7.0 8.0 8.0 9.0 9.0 1.0 1.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 16.0 17.0 18.0 19.0 2.0 21.0 22.0 23.0 24.0 25.0 Clamping Key K DCN 6-9.99 K DCN 6-9.99 K DCN 6-9.99 K DCN 6-9.99 K DCN 6-9.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 10-13.99 K DCN 14-17.99 K DCN 14-17.99 K DCN 14-17.99 K DCN 14-17.99 K DCN 14-17.99 K DCN 18-21.99 K DCN 18-21.99 K DCN 18-21.99 K DCN 18-21.99 K DCN 22-26.99 K DCN 22-26.99 K DCN 22-26.99 K DCN 22-26.99 5

[close]

p. 6

Drill Holders for Drilling and Chamfering in One Operation CHAMRING L1 a˚ D2 D max min L max min d D3 L4 Whistle notch shank d2 Designation CHAMRING 0315-W1.00-06 CHAMRING 0354-W1.00-06 CHAMRING 0394-W1.00-09 CHAMRING 0433-W1.00-09 CHAMRING 0472-W1.00-09 CHAMRING 0512-W1.00-09 CHAMRING 0551-W1.25-09 CHAMRING 0591-W1.25-09 CHAMRING CHAMRING CHAMRING CHAMRING CHAMRING CHAMRING CHAMRING CHAMRING CHAMRING CHAMRING 0630-W1.25-09 0669-W1.25-09 0709-W1.25-09 0748-W1.25-09 0787-W1.25-09 0827-W1.5-09 0866-W1.5-09 0906-W1.5-09 0945-W1.5-09 0984-W1.5-09 DCN…295 DCN…315 DCN…335 DCN…354 DCN…375 DCN…394 DCN…413 DCN…433 DCN…453 DCN…472 DCN…492 DCN…512 DCN…531 DCN…551 DCN…571 DCN…591 DCN…630 DCN…669 DCN…709 DCN…748 DCN…787 DCN…827 DCN…866 DCN…906 DCN…945 DCN…984 DCNS 3D DCM 3.5D DCNS 5D Dmin Dmax Lmin Lmax Lmin Lmax Lmin Lmax .295 .315 .335 .354 .374 .394 .413 .433 .453 .472 .492 .512 .531 .551 .571 .591 .630 .669 .709 .748 .787 .827 .866 .906 .945 .984 .311 .331 .350 .370 .390 .409 .429 .449 .469 .488 .508 .528 .547 .567 .587 .626 .665 .705 .744 .783 .823 .862 .902 .941 .980 1.020 .496 .531 .496 .512 .508 .571 .618 .638 .594 .650 .634 .689 .697 .713 .756 .776 .768 .843 .953 1.122 1.531 1.307 1.437 1.571 1.709 1.846 .945 .969 1.031 1.150 1.094 1.252 1.311 1.390 1.445 1.484 1.559 1.634 1.689 1.772 1.756 1.866 2.180 2.161 2.567 2.453 2.894 2.720 2.807 2.976 3.110 3.252 .49 .55 .59 .62 .68 .56 .57 .71 .61 .76 .79 .84 .77 .85 .79 .99 1.04 1.12 1.22 1.43 1.56 .86 .90 1.05 1.07 1.15 1.12 1.16 1.77 1.30 1.39 1.47 1.51 1.55 1.64 1.66 1.72 1.94 2.06 2.24 2.49 2.64 .681 .972 .728 .902 1.024 1.248 1.228 1.343 1.331 1.441 1.563 1.681 1.630 1.764 1.732 1.874 2.244 2.201 2.362 2.638 3.110 2.992 3.189 3.268 3.583 3.819 1.496 1.772 1.693 1.843 1.850 2.039 2.134 2.256 2.339 2.425 2.551 2.677 2.768 2.878 2.909 3.177 3.445 3.484 3.661 3.937 4.449 4.331 4.508 4.783 5.000 5.236 d .315 .315 .354 .354 .394 .394 .433 .433 .472 .472 .512 .512 .551 .551 .591 .591 .63 .669 .709 .748 .787 .827 .866 .906 .945 .984 D3 .984 .984 .984 .984 .984 .984 .984 .984 .984 .984 1.496 1.496 1.496 1.496 1.496 1.496 1.496 1.496 1.496 1.496 1.496 1.968 1.968 1.968 1.968 1.968 D2 .74 .74 .78 .78 .98 .98 1.02 1.02 1.06 1.06 1.1 1.1 1.12 1.12 1.16 1.16 1.2 1.24 1.28 1.32 1.35 1.394 1.433 1.472 1.512 1.551 L1 1.87 1.87 1.87 1.87 2.65 2.65 2.65 2.65 2.65 2.65 2.65 2.65 2.65 2.65 2.65 2.65 2.65 2.65 2.65 2.95 2.95 3.322 3.322 3.322 3.322 3.322 L4 d2 Inserts 06… 06… 06… 06… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 09… 2.205 1 XCGT 2.205 1 XCGT 2.205 1 XCGT 2.205 1 XCGT 2.205 1 XCGT 2.205 1 XCGT 2.205 1 XCGT 2.205 1 XCGT 2.205 1 XCGT 2.205 1 XCGT 2.205 1 XCGT 2.205 1 XCGT 2.362 1.25 XCGT 2.362 1.25 XCGT 2.362 1.25 XCGT 2.362 1.25 XCGT 2.362 1.25 XCGT 2.362 1.25 XCGT 2.362 1.25 XCGT 2.362 1.25 XCGT 2.362 1.25 XCGT 2.677 1.5 XCGT 2.677 1.5 XCGT 2.677 1.5 XCGT 2.677 1.5 XCGT 2.677 1.5 XCGT • It is recommended to apply external coolant on the chamfering inserts • Reduce the recommended feed and speed by 50% when machining maximum chamfer size • Lmin & Lmax dimensions are based on the 45° chamfering insert. Chamfering angle (a°) is dependent on the chamfering insert being used. • • • • • • • Assembly Instructions Insert the UNICHAMDRILL into the CHAMRING prior to clamping the chamfering inserts. Adjust the UNICHAMDRILL protrusion by using the rear screw, then correct adjustment using the side clamping screw. Attach the chamfering inserts. Adjustment of UNICHAMDRILL Protrusion Loosen the chamfering inserts clamping screws. Loosen the side clamping screw. Adjust the UNICHAMDRILL protrusion by using the rear screw, then correct adjustment using the side clamping screw. Re-tighten the chamfering inserts. Spare Parts Designation CHAMRING 0315-0354 CHAMRING 0394-0787 CHAMRING 0827-0984 Back Screw Key HW 3.0 HW 5.0 HW 6.0 Side Locking Screw SR M6X6DIN916 SR M10X10DIN916 SR M16X16 DIN1835-B Side Locking Screw Key Back Screw HW 3.0 HW 5.0 HW 8.0 SR M6X1S SR M10X1.5S SR M12X1.75S Insert Screw SR 14-560 SR 14-544/S SR 14-544/S Torx Key T-8/53 Torex Blade BLD T15/S7 BLD T15/S7 Handle SW6-SD SW6-SD 6 ISCAR

[close]

p. 7

for g d re Mnin ee MU ur e gin I l T nc En AXmica rma M ono erfo Ec P XCGT-DT Inserts used on Chamfering Drill Holders for Chamfering and Drilling in One Operation W a˚ S l Dimensions Designation XCGT 060300-30DT XCGT 060300-45DT XCGT 060300-60DT XCGT 090300-30DT XCGT 090300-45DT XCGT 090300-60DT W .252 .252 .252 .346 .346 .346 l .484 .484 .484 .630 .630 .630 S .110 .110 .110 .130 .130 .130 a° 30 45 60 30 45 60 Chamfering Inserts for CHAMRING 60° 90° 120° Standard XCGT inserts mounted on the CHAMRING body provide 3 standard chamfering angles: 30°, 45°, 60°. IC508 l l l l l l 7

[close]

p. 8

CH E AM M ngi FE A nee RI XI red NG M f P e U M or r 8 The PRE-THREAD DCT CHAMDRILL Pre-thread hole drilling is very popular in many industries. DCT drills were designed for M8 to M24 ISO M standard pre-thread holes. In most tapping operations a chamfered pre-hole is required. The DCT chamfering drill provides a single pass solution for steel and cast iron pre-threading holes operation. DCT drills are suitable for the pre-threading operation for the most popular tap sizes. ISCAR fo rm an ce

[close]

p. 9

for g d re Mnin ee MU ur e gin I l T nc En AXmica rma M ono erfo Ec P l USER GUIDE Pre-Thread DCT Inch Threads Recommended Diameters Drilling with a 45° chamfer Drilling and counterboring .236" ma x Drill DCT DCT DCT DCT DCT DCT DCT DCT DCT DCT DCT DCT DCT DCT Designation 0311-100-063B-3/8UNC 0331-100-063B-3/8UNF 0366-106-063B-7/16UNC 0390-106-063B-7/16UNF 0421-106-063B-1/2UNC 0453-106-063B-1/2UNF 0484-106-063B-9/16UNC 0516-106-063B-9/16UNF 0531-120-075B-5/8UNC 0579-120-075B-5/8UNF 0657-140-075B-3/4UNC 0689-140-100B-3/4UNF 0764-165-100B-7/8UNC 0811-165-100B-7/8UNF Drill Dia. Range .303-.354 .323-.354 .358-.393 .382-.393 .413-.432 .445-.472 .476-.511 .512-.550 .524-.550 .571-.590 .650-.668 .681-.708 .756-.787 .803-.826 UNF Thread UNF3/8-24 UNF7/16-20 UNF1/2-20 UNF9/16-18 UNF5/8-18 UNF3/4-16 UNF7/8-14 Drill Head Dia. .335 .390 .453 .516 .571 UNF Helicoil Thread UNF5/16-24 UNF3/8-24 UNF7/16-20 UNF1/2-20 Drill Head Dia. .323 UNC Thread UNC3/8-16 UNC7/16-14 Drill Head Dia. .311 .370 .425 .484 .531 .650 .768 .386 UNC1/2-13 .453 UNC9/16-12 .516 UNC5/8-11 UNC3/4-10 .689 UNC7/8-9 .803 Drill DCT DCT DCT DCT DCT DCT DCT DCT DCT Designation 0311-100-063B-3/8UNC 0331-100-063B-3/8UNF 0366-106-063B-7/16UNC 0390-106-063B-7/16UNF 0421-106-063B-1/2UNC 0453-106-063B-1/2UNF 0531-120-075B-5/8UNC 0657-140-075B-3/4UNC 0764-165-100B-7/8UNC Drill Dia. Range .303-.354 .323-.354 .358-.393 .382-.393 .413-.432 .445-.472 .524-.550 .650-.668 .756-.787 UNC Helicoil Thread UNC5/16-18 UNC3/8-16 UNC7/16-14 UNC1/2-13 Drill Head Dia. .331 BSW Thread BSW3/8-16 BSW7/16-14 Drill Head Dia. .311 .362 .413 .472 .531 .650 .760 .393 .461 .524 BSW1/2-12 BSW9/16-12 BSW5/8-11 BSW3/4-10 BSW7/8-9 Drill DCT DCT DCT DCT DCT DCT DCT DCT DCT DCT DCT DCT DCT Designation 0311-100-063B-3/8UNC 0331-100-063B-3/8UNF 0366-106-063B-7/16UNC 0421-106-063B-1/2UNC 0453-106-063B-1/2UNF 0484-106-063B-9/16UNC 0516-106-063B-9/16UNF 0531-120-075B-5/8UNC 0579-120-075B-5/8UNF 0657-140-075B-3/4UNC 0689-140-100B-3/4UNF 0764-165-100B-7/8UNC 0811-165-100B-7/8UNF Drill Dia. Range .303-.354 .323-.354 .358-.393 .413-.432 .445-.472 .476-.511 .512-.550 .524-.550 .571-.590 .650-.668 .681-.708 .756-.787 .803-.826 BSF Thread BSF3/8-20 BSF7/16-18 BSF1/2-16 BSF9/16-16 BSF5/8-14 BSF3/4-12 BSF7/8-11 Drill Head Dia. .319 .374 .433 BSP Thread G1/8-28 Drill Head Dia. .346 Thread UNEF3/8-32 Drill Head Dia. .343 G1/4-19 .492 .465 UNEF1/2-28 UNEF9/16-24 .465 .520 .583 .701 .826 .551 UNEF5/8-24 .650 UNEF3/4-20 .768 G5/8-14 .826 UNEF7/8-20 Drill DCT DCT DCT DCT DCT Designation 0331-100-063B-3/8UNF 0390-106-063B-7/16UNF 0453-106-063B-1/2UNF 0579-120-075B-5/8UNF 0657-140-075B-3/4UNC Drill Dia. Range .323-.354 .382-.393 .445-.472 .571-.590 .650-.668 UNJF Thread UNJF3/8-24 UNJF7/16-20 UNJF1/2-20 UNJF5/8-18 Drill Head Dia. .339 .393 .453 .571 NPT Thread NPT1/8-27 Drill Head Dia. .335 NPT3/8-18 NPT1/2-14 .571 .701 (1) Used for specially tailored tools 9

[close]

p. 10

DCT (3/8-7/8 UNC/UNF) Indexable Head Drills with Chamfering Insert, Mainly for Pre-Thread Holes .007”XD Dmin/max L D2 45° d .236 L1 Dnominal(2) .311 .331 .366 .390 .421 .453 .484 .516 .531 .579 .657 .689 .764 .811 L5 L4 D2 .590 .610 .630 .630 .630 .630 .630 .630 .750 .750 .780 .880 1.000 1.000 Designation DCT 0311-100-063B-3/8UNC DCT 0331-100-063B-3/8UNF DCT 0366-106-063B-7/16UNC DCT 0390-106-063B-7/16UNF DCT 0421-106-063B-1/2UNC DCT 0453-106-063B-1/2UNF DCT 0484-106-063B-9/16UNC DCT 0516-106-063B-9/16UNF DCT 0531-120-075B-5/8UNC DCT 0579-120-075B-5/8UNF DCT 0657-140-075B-3/4UNC DCT 0689-140-100B-3/4UNF DCT 0764-165-100B-7/8UNC DCT 0811-165-100B-7/8UNF D min (1) D max .353 .353 .393 .393 .431 .472 .511 .551 .551 .590 .669 .708 .787 .826 d .625 .625 .625 .625 .625 .625 .625 .625 .750 .750 .750 1.000 1.000 1.000 L 1.00 1.00 1.06 1.06 1.06 1.06 1.06 1.06 1.20 1.20 1.40 1.40 1.65 1.65 L1 1.80 1.80 1.83 1.83 1.89 1.89 1.89 1.89 2.01 2.03 2.20 2.20 2.48 2.48 L4 1.89 1.89 1.89 1.89 1.89 1.89 1.89 1.89 1.97 1.97 1.97 2.20 2.20 2.20 L5 1.150 1.150 1.200 1.180 1.170 1.150 1.140 1.120 1.320 1.290 1.450 1.500 1.780 1.750 Th(3) 3/8UNC 3/8UNF 7/16UNC 7/16UNF 1/2UNC 1/2UNF 9/16UNC 9/16UNF 5/8UNC 5/8UNF 3/4UNC 3/4UNF 7/8UNC 7/8UNF .303 .323 .358 .382 .413 .445 .476 .512 .524 .571 .650 .681 .756 .803 Spare Parts Designation DCT 0311-100-063B-3/8UNC DCT 0331-100-063B-3/8UNF DCT 0366-106-063B-7/16UNC DCT 0390-106-063B-7/16UNF DCT 0421-106-063B-1/2UNC DCT 0453-106-063B-1/2UNF DCT 0484-106-063B-9/16UNC DCT 0516-106-063B-9/16UNF DCT 0531-120-075B-5/8UNC DCT 0579-120-075B-5/8UNF DCT 0657-140-075B-3/4UNC DCT 0689-140-100B-3/4UNF DCT 0764-165-100B-7/8UNC DCT 0811-165-100B-7/8UNF Screw SR SR SR SR SR SR SR SR SR SR SR SR SR SR 34-508 34-508 34-508 34-508 34-508 34-508 34-508 34-508 34-508 34-508 34-508 34-508 34-508 34-508 Key T-7/51 T-7/51 T-7/51 T-7/51 T-7/51 T-7/51 T-7/51 T-7/51 T-7/51 T-7/51 T-7/51 T-7/51 T-7/51 T-7/51 Clamping Key K K K K K K K K K K K K K K DCM- 8 DCM- 8 DCM- 9 DCM- 9 DCM-10 DCM-11 DCM-12 DCM-13 DCM-13 DCM-14 DCM-16 DCM-17 DCM-19 DCM-20 AOMT inserts mounted on DCT tools provide a 45° chamfer. • All drills come with through coolant supply for prolonged tool life and safe machining process • No regrinding service is needed, due to the indexable insert design • The unique CHAMDRILL system features no setup time • Time-saving due to combined drilling, chamfering and counter sinking operations Advantages 10 ISCAR

[close]

p. 11

for g d re Mnin ee MU ur e gin I l T nc En AXmica rma M ono erfo Ec P IDI-SG /IDI-SK SG - for General Use, SK - for Cast Iron S D 140° D.268-862” D.866-1.023” Designation D Range (1) .268 .295-.311 .315-.350 .354-.390 .394-.429 .433-.469 .472-.508 .512-.547 .551-.587 .591-.626 .630-.665 .669-.705 .709-.744 .748-.783 .787-.823 .827-.862 .866-.902 .906-.941 .945-.980 .984-1.020 S .161 .161 .161 .169 .209 .217 .228 .236 .268 .291 .311 .291 .327 .335 .366 .374 .406 .409 .425 .433 Pocket Size  6.8  8.0  8.0  9.0 1.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 2.0 21.0 22.0 23.0 24.0 25.0 IDI-SG... IDI-SK... (1) The drilling heads are available in increments of .004”. Ordering example for IDI-SG .394” drilling head: IDI 0394-SG IC908 AOMT-Chamfering Chamfering Inserts AOMT 060204-45DT a° l w l a° w S±.001 Dimensions Tough Ö Hard Designation AOMT 060204-45DT AOMT 030204-N-45DT AOMT 030204-N-30DT (1) Used for specially tailored tools l (1) (1) W .177 .157 .157 S .077 .063 .063 a° 45.5 45.5 3.5 .223 .110 .157 l l l l IC1008 IC508 IC908 IC908 l l l l l l l l l l l l l l l l l l l l 11

[close]

p. 12

Your Tool Advisor Genius ITA recommends the optimal tool based on application parameters and your machine power. 3 tool options, 25 alternatives, cutting data, power consumption, cutting time, metal removal rates, engineering support and more. Dansk English Français Deutsch Suomi Italiano 日本語 한국어 Nederlands Português Русский Svenska Español-España Tiếng Việt 中文 Български език Српски Magyar Hrvatski Español-México Norsk 7861813 R 10/2013 © ISCAR LTD All rights reserved Polski Româneşte Slovenščina Türkçe Slovenčina Available for Windows and MAC operating systems, including iPhones and iPads. Čeština 12 ISCAR www.iscar.com

[close]

Comments

no comments yet