Shelby Remote Manual

Embed or link this publication

Popular Pages


p. 1

.

[close]

p. 2

warranty shelby warranty information product warranty returns must only be submitted by an authorized dealer all shelby models have a limited lifetime warranty on the main control module all parts excluding the control module have a two year warranty against defects in workmanship this includes the shock sensors remote transmitters and sirens the control module will be repaired or replaced at our discretion for up to a 24 month period at no charge after 24 months a $30.00 fee will be charged for repair or replacement of the control module removal and reinstallation charges are not the responsibility of jbs technologies llc the manufacturer of shelby warranty registration must be completed within 14 days of the original date of purchase registration can be mailed in or performed on line at www.shelbyautomotive.com jbs technologies makes no warranty against the theft of a vehicle or its contents this warranty only extends to the original system purchaser and the vehicle it was originally installed on limitation of remedies the purchasers remedy is limited to the repair or replacement of the unit and in no event shall exceed the purchase price incidental consequential and or indirect damages are expressly disclaimed no person or entity is authorized to alter or amend this limited lifetime warranty.

[close]

p. 3

table of contents a remote transmitter operation 5 b led display 6 c chirp indicator 6 d parking light 6 e alarm operation condition 6 f active arming arm lock 6-7 ajar warning silent arming disarming shock sensor by-pass noiseless mode hidden alarm function g passive arming 7-8 passive door locking passive arming by-pass h active disarming unlock disarm 8 tamper disarming pathway illumination two steps door unlock automatic rearm i disarming without a transmitter 9-10 overrides the alarm without password pin code overrides the alarm with password pin code j valet mode 10 enter valet mode exit valet mode remote valet mode k car finder 10 l panic function 10-11 m trigger the system 11 clear the trigger icons and melody sound 14 400som 01/05 3

[close]

p. 4

table of contents n anti car jacking 12 active car jacking passive anti car jacking trigger the anti car jacking mode override the system to turn off anti car jacking o dome light convenience delay supervision 13 p ignition control the door lock/unlock 13 q trunk release channel 3 output 13 r channel 4 timer control output 13 s power on memory 13 operation o dome light supervision the alarm has a unique feature which will turn on your vehicles dome light as follows 1 upon disarming the dome light will remain on for 30 seconds 2 if the vehicle is intruded the dome light will flash for the same duration as the siren note turning on the ignition switch or arming the alarm will turn off the dome light p ignition controlled door locking and unlocking see alarm feature ii-3 programming 1 turn the ignition switch on and close all the vehicles doors after 3 seconds the system will automatically lock the central locking system 2 turn the ignition switch off the system will automatically unlock the central locking system q trunk release channel 3 output channel 3 timer control output see alarm feature iii-3 programming press and hold the button on the transmitter for 2 sec to open the trunk release or any other electric devices that has been added to this output channel 3 is user-programmable timer output you may program the built=in timer to send a ground signal for any time interval between 1 second and 2 minutes for instance this timer output may be used to turn on the headlights power windows or sunroof note factory default setting at 1 second pulse grounded for trunk release output r channel 4 timer control output press the transmitters and buttons at the same time to activate the channel 4 function channel 4 is a user-programmable timer output you may program the built-in timer to send a ground signal for any time duration from 1 second to 120 seconds for instance this timer output may be used to turn on the headlights power windows or sunroof the factory default setting is a momentary output s power on memory this security system is equipped with circuitry that will allow the unit to remember its alarm state if the vehicles battery power is lost then 13 reconnected 4

[close]

p. 5

operation n anti car jacking warning if you don t need the car jacking function in this alarm system be sure to set car jacking feature to the off setting this system default setting for car-jacking is off active anti car-jacking 1 press and hold the transmitters and buttons at the same time for 2 seconds while the vehicles ignition is on the parking lights will turn on for 1.5 seconds to indicate the system is in the car-jacking mode 2 once the system is in car-jacking mode and you are forced from the vehicle the system will trigger when the door is opened and closed while the ignition is in the on position passive anti car jacking 1 turn the ignition switch to the on position for entering the carjacking mode 2 once the system is in car-jacking mode and you are forced from the vehicle the system will trigger when the door is opened and closed while the ignition is in the on position trigger the anti car -jacking mode a 50 seconds after the system has been triggered the siren will start chirping for 15 seconds b during the 15 second period of chirping you must push the valet switch once to turn off the car-jacking feature if not it will enter the second timer anti car-jacking mode c 65 seconds after the system has been triggered the siren will start alarming and the parking lights will continue flashing d 90 seconds after the system has been triggered 1 the siren will continue alarming and the parking lights flashing 2 the starter disable will activate to prevent the vehicle from starting with the key 3 this will remain active until the vehicle s battery power is exhausted override the system to turn off anti car jacking turn the ignition switch from the off to on position and within 10 seconds push and release the valet/program switch the siren will stop and the system is disarmed note if you use password pin code to double protect the vehicle security you will need to use it to completely disarm the system 12 important notice warnings as with any product that performs automatic functions there are certain safety precautions that you must practice and be aware of 1 keep all transmitters out of the reach of children 2 the use and operations of this system is the sole responsibility of the operator operation a remote transmitter operation transmitter button system function or feature lock doors arm system arm and delete the 2 stage shock sensor arm and noiseless mode arm system and hidden alarm function car locator 3-sec panic function silent arming disarming 2-sec active anti car-jacking mode unlock doors disarm system two steps door unlock disarm system trunk release channel 3 passive arming by-pass remote control entry/exit valet mode channel 4 timer output 5 remark press twice within 3 seconds press within 3 seconds press within 3 seconds upon arming press and hold for 3 seconds ignition in off position ignition in on position press and hold for 2 seconds press twice within 3 seconds press and hold for 2 seconds while the system disarmed while the system disarmed press within 3 seconds 2-sec +

[close]

p. 6

operation b led status display chart led status off disarmed slow flash armed fast flash passive arming on solid valet mode c chirp indicators 1 chirp arm 2 chirps disarm 3 chirps ajar warning 4 chirps disarm/trigger 6 chirps car locator led 2 flashes pause 3 flashes pause 4 flashes pause 5 flashes pause status zone 2 trigger on trunk/hood zone 3 trigger on door switch zone 4 trigger on shock sensor zone 5 trigger on ignition switch operation 2 during panic mode the normal function of this transmitter button will be suspended the transmitters and buttons can be used to lock and unlock the doors however once the button is pressed the vehicles starter disable device if installed will enabled the vehicle to be started with the ignition key 3 to stop the alarm press and hold the and buttons on the transmitter again for 3 seconds also if any transmitter button other than or is pressed and released the panic mode will be turned off immediately 4 if the button is not pressed the alarm will automatically stop after 30 seconds m trigger the alarm system when armed your vehicle is protected as follows 1 light impact will trigger the warn-away signal a long chirp from the siren or horn 2 heavy impacts doors opening hood opening trunk opening or turning the ignition on will trigger the programmed sequence the starter disable relay if installed prevents the vehicles starter from cranking the siren horn parking lights and dome light will turn on to alert an intrusion for 30 seconds the system will then stop and automatic reset or re-arm if one of the sensors or detectors is active the alarm system will sound a maximum of 6 times in 30 seconds cycles noise abatement circuit your system has a noise abatement circuit this feature prevents annoying repetitive trigger sequences due to a faulty door pin switches or environmental conditions such as thunder jackhammers airport noise etc heres how the noise abatement circuit works the alarm triggers five times each time the same sensor or switch is triggering the alarm the noise abatement circuit will interpret this pattern of triggers or false alarms after the fifth trigger the noise abatement circuit ignores or bypasses that sensor until another sensor or switch is triggered the noise abatement circuit covers the doors doors hood and trunk differently if the alarm is triggered by an open door for six full cycles the doors will be bypassed until the trigger ceases 11 d parking light indicator display chart 1 flash arm 2 flashes disarm 3 flashes disarm/triggered 12 flashes car locator e system operating condition siren horn parking light led doors starter 1 arming 1 or 3 chirps 1 flash slow flash locking disable 2 disarming 2 or 4 chirps 2 or 3 flashes fast flash or off unlocking 3 trigger 4 panic 5 car-jacking 6 car locator alarming alarming alarming 6 chirps flashes flashes flashes 12 flashes slow flash disable disable dome light turns on for 30 seconds flashes flashes flashes f active arming lock and arm 1 press the button on the transmitter 2 the siren will chirp 1 time and the parking lights will flash 1 time indicating that the system is now armed the vehicles doors will lock upon arming when interfaced with the security systems keyless entry ajar warning if the siren chirps 3 times you have left a door trunk or hood lid ajar see alarm feature i-3 programming 6

[close]

p. 7

operation 5 turn the ignition switch to the off position [4 chirps from the siren or horn and [3 flashes from parking lights will indicate the system was disarmed j valet mode disarm or valet mode the valet/program switch allows you to temporarily bypass all alarm functions eliminating the need to hand your transmitter to parking attendants or garage mechanics when the system is in valet mode all alarm functions and remote starter functions are bypassed however the remote panic feature and remote door locks will remain operational to use the valet mode the system must first be disarmed either by using you remote transmitter or by operating the manual override sequence to enter valet mode 1 turn ignition to the on position 2 press and hold the valet/program switch for 2 seconds or until the led turns on the led will remain on and solid for as long as the system is in valet mode to exit valet mode 1 returning to normal operation turn ignition switch to the on position 2 press and hold the valet/program switch for 2 seconds the led will turn off indicating the system is out of valet mode remote valet disarm or valet mode button on the transmitter three times within 3 press and release the seconds to enter or exit valet mode the parking light flash to confirm you have entered valet mode and [2]parking light flashes will confirm you have exited valet mode k car finder with the unit armed press the button to activate the car finder function the siren will chirp 6 times and the parking lights will flash 12 times to locate your vehicle l panic function the transmitter can be used as a remote panic button to manually trigger the alarm in case of emergency to enter panic mode 1 press and hold the button for 3 seconds the alarm will immediately sound 10 operation silent arming disarming pressing the transmitters and buttons at the same time will arm or disarm your security system no chirping sound will be heard and the arm disarm confirmation will be visible with the parking lights only shock sensor by-pass pressing the button on the transmitter 2 times within 3 seconds will arm the security system and by-pass the shock sensor the system will chirp one additional time to confirm the sensor bypass mode was activated the sensor bypass feature is programmed to activate for 1 arming cycle only the security system will return to normal operation during the next arming cycle noiseless mode press the button 1 time to arm the system press the button 2 more times within 3 seconds the siren will chirp 1 more time the system is now in noiseless mode in noiseless mode the zone 4 shock sensor timer will be reduced from 30 seconds to 15 seconds the noiseless feature is programmed to activate for 1 arming cycle only the security system will return to normal operation during the next arming cycle hidden alarm function press the button first then within 3 seconds press the button to activate the hidden alarm function the security system will arm and be in hidden alarm function the siren or horn will be silenced even if the sensor is triggered in the armed status g passive arming see alarm feature ii-2 programming active arming disarming will allow you to operate your security system with the remote transmitter only this security system is equipped with an optional passive arming feature which allows the security system to automatically arm 30 seconds after the last door is closed to enter passive arming 1 turn the ignition to the off position and exit the vehicle 2 after all entrances are closed the security system led will flash fast for 30 seconds if you re-open the doors hood or trunk the security system led will stop flashing it will begin flashing again once the vehicles entrances are closed 7 .

[close]

p. 8

operation 3 after the 30-second timer has elapsed the security system will automatically arm the siren will [1 chirp and the parking lights will flash [1 time and remain on for 10 seconds passive door locking the vehicle doors will automatically lock after the passive arming cycle has been completed passive arming by-pass while the system is disarmed press the button twice the system will respond with [1 chirp and the led will turn on the security system will remain in this temporary state until exited to exit passive by-pass press the transmitters or buttons and the system will return to normal status h active disarming unlock and disarm 1 press the button on the transmitter 2 the siren will chirp [2 times and the parking lights will flash [2 times indicating that the security system is now disarmed 3 the vehicles doors will unlock and the dome light will turn on for 30 seconds upon disarming tamper disarming if the alarm is triggered upon disarm of the system the siren will chirp 4 times and the parking lights will flash 3 times pathway illumination this feature turns the parking light on for 30 seconds upon an unlock signal and for 10 seconds for a lock signal two step door unlock this feature will independently unlock the drivers door only when disarming the security system pressing the button a second time within 3 seconds will unlock the other doors automatic rearm if this feature is selected the security system will automatically re-arm itself in 60 seconds after disarming with the remote transmitter automatic rearm will cancel if any door is opened before the 60 second timer has elapsed operation i disarming without a transmitter overriding the alarm without a password pin code factory default setting the override function may be used if the remote transmitter is lost or inoperative 1 enter the vehicle and turn the ignition switch to the on position the alarm will sound 2 within 10 seconds push and release the valet/program switch the alarm will stop sounding and enter the disarm mode you can now start and operate the vehicle normally override the alarm with password pin code see alarm feature iv2 programming unlike the valet switch easily found and defeated this security system allows the consumer to program a password pin code this feature will offer a higher level of security protection to operate password pin code 1 enter the vehicle and turn the ignition switch to the on position the alarm will sound 2 within 5 seconds enter your chosen first digit code by pressing and releasing the valet/program switch 3 within 15 seconds of the last digit code enter the 1st code turn the ignition switch off and then back to the on position 4 within 15 seconds enter your chosen second digit code by pressing and releasing the valet/program switch 5 turn the ignition switch to the off position [4 chirps from the siren or horn and [3 flashes from the parking lights will indicate the system was disarmed example to override the system with the password code 83 you would 1 enter the vehicle and turn the ignition switch to the on position the alarm will sound 2 within 5 seconds press and release the valet/program switch 8 times 3 within 15 seconds of the last digit code enter turn the ignition switch from off to on 4 within 15 seconds press and release the valet/program switch 3 times 9 8

[close]

Comments

no comments yet