LADLE_HANDLING_AND_CASTING_SYSTEMS

 

Embed or link this publication

Popular Pages


p. 1

ladle handling and casting systems www.bertolottispa.com

[close]

p. 2

ladle handling and casting systems ladle handling and large ingot-casting facilities ladle-transfer cars ladle tilting/lifting equipment the casting portals are radio-controlled by the operators during ladle loading/unloading and large ingot casting portals handle the ladles for casting purposes ease and flexibility in handling allows a high improvement of overall productivity they are conceived so as to receive the ladle with direct loading by the over-head cranes or picking up of the ladle from dedicated ground stands or transfer cars ladle positioning over the casting point cast quantity and casting rate are evaluated by means of a weighing system with load cells fitted into the lifting system the casting rate can be controlled by adjusting the ladle s bottom sliding gate to a fissure position through the actuation of the dedicated cylinder the monitoring of the facility is ensured by a the overhead cranes are not engaged in casting and are therefore free to work out other tasks i.e work on transferring and handling state-of-the art diagnostic system which supervises the status of the instruments and sensors increasing in turn the overall productivity of the casting-shop.

[close]

p. 3



[close]

p. 4

casting portals have the following main features ground and/or overhead runways electrically driven main travelling direction electrically driven secondary carriage for ladle cross positioning ladle lifting by means of hydraulic cylinders or cable-winch system ladle cover handling device hydraulic fluid aggregate power centre and control system plc operator interface fitted on board power supply by means of conductor bars or cable and cable-reel remote radio control both from control pulpit inside the cabin and hand-held device heat shields weighing system technical gases o2 n2 ar fed onboard with hoses and hose-reels onboard gangways to allow access for the operators.

[close]

p. 5



[close]

p. 6



[close]

p. 7



[close]

p. 8

bertolotti s.p.a località s.antonio 50064 incisa v.no fi italy phone 39 055 833171 telefax 39 055 8335641 impianti@bertolottispa.it

[close]

Comments

no comments yet