p. 1

a vital part of connection world cmpter cable connectors receptacles with solder end tnc connectors copyright © cmpter electronics 2010

[close]

p. 2

tnc 50 ohm coaxial connectors description cmpter the threaded neil concelman connector emerged in 1956 as an alternative to the bayonet coupling mechanism of the bnc.utilizing the same basic structural parameters as the bnc connector only miniature they are two versions of tnc connectors:standard and reverse polarity the standard type of tnc operates in frequency ranges between dc-11 ghz and is often used in applications which have performance requirements such as networks antennas telecom cable assembly and celluar system contents 1 interface dimensions 2 technical data 3 cable connectors 4 receptacles with solder end 9 assembly instruction 10 mounting hole 15 description tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 1

[close]

p. 3

tnc interface plug jack cmpter letter abdefg 1 2 3 4 5 6 7 8 mm min 1.32 4.83 11.40 0.35 7 4.9 5.28 0.15 1.8 0.15 0.08 5.33 0.7 inch max 1.37 2.2 0.65 7.05 5.7 5.79 1.02 5.84 1.98 min 0.052 0.190 0.449 0.014 0.275 0.193 0.208 0.006 0.071 0.006 0.003 0.210 0.027 max 0.054 0.087 0.025 0.277 0.224 0.228 0.040 0.230 0.078 letter abcdefh 1 2 3 4 5 6 7 8 9 mm min 8.1 8.31 8.79 9.6 8.3 1.73 4.75 4.72 4.78 10.7 0.38 4.95 inch max 4.72 8.1 8.46 9.04 9.68 2.2 5.9 8.5 2.24 0.15 5.23 5.28 0.76 min 0.319 0.327 0.346 0.378 0.327 0.068 0.187 0.186 0.188 0.421 0.015 0.195 max 0.186 0.321 0.333 0.356 0.381 0.087 0.232 0.335 0.088 0.006 0.206 0.208 0.030 interface dimensions conformable to the standards international europe usa iec60169-17 cecc 22 200 mil-c-39012 tnc interface mil-std-348a/313 ip rating interface mated ip68 email sales@cmpter.com tel +86-511-8443 6131 fax +86-511-8502 5485 website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 2

[close]

p. 4

technical data electrical data impedance frequency range dielectric withsanding voltage working voltage insulation resistance contact resistance rf leakage 50 ohm dc 11 ghz cmpter 1.5 kv rms 50 hzdepending on cable 500 v rms 50 hzdepending on cable 51000 m inter contact 1.5 m out contact 1m 55 db mechanical data coupling nut torque 46 ncm 69 ncm/4.1 in.lbs 6.1 in.lbs recommended 170 ncm/15.0 in.lbs proof torque coupling nut retention force contact captivation durabilitymatings 450 n 101.2 lbs 27n 6.1lbs 500 environmental temperature range thermal shock moisture resistance corrosion vibration -40 °c to 155 °c mil-std-202 method 107,condition b mil-std-202 method 106 saltspray test acc.to mil-std-202 method 101 condition b mil-std-202 method 204 condition b tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 3

[close]

p. 5

cable connectors straight cable plugs male finish p/n 80-03-1m18-001 cable type lmr195/rg58 center gold 3.20 126 dia 4.60 181 dia cmpter rohs body nickel 5.40 213 dia 6.25 246 dia assembly instruction a01 notes cable entry crimp centre contact soldered 15.00 591 dia 23.50 925 12.70 500 finish p/n 80-03-1m04-002 cable type rg316/lmr100/rg174 center gold 1.65 065 dia 2.60 102 dia body nickel assembly instruction a02 3.20 126 dia notes 20.80 819 15.00 591 dia centre contact soldered 10.00 394 finish p/n 80-03-1m10-004 cable type lmr240 center silver 4.2 165 dia 4.00 157 cable entry crimp body nickel assembly instruction a01 notes cable entry crimp centre contact soldered 15.00 591 dia 23.50 925 13.00 512 tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com 6.80 268 dia 8.00 315 dia website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 4

[close]

p. 6

cable connectors straight cable plugs male finish p/n 80-03-1m01-005 cable type lmr400 center gold body nickel 7.5 295 dia cmpter rohs assembly instruction a01 10.90 429 dia 12.20 480 dia notes cable entry crimp centre contact soldered 15.00 591 dia 26.00 [1.024 15.00 591 finish p/n 80-03-4m18-006 cable type rg58/lmr195 center gold 26.45 [1.041 15.00 591 dia body nickel assembly instruction a03 notes cable entry clamp centre contact soldered sw 11.00 433 af sw 11.00 433 hex finish p/n 80-03-4m01-008 cable type lmr400 center gold body nickel assembly instruction a03 notes cable entry clamp centre contact soldered 15.00 591 dia 37.45 [1.474 sw 16.00 630 af sw 16.00 630 af tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com 19.00 748 dia website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 5

[close]

p. 7

cable connectors right angle cable plugs male finish p/n 80-13-1m18-009 cable type lmr195/rg58 center gold 25.10 988 12.70 500 cmpter rohs body nickel assembly instruction a04 notes cable entry crimp centre contact soldered 15.00 591 dia 19.70 776 5.40 213 dia 3.20 126 dia finish p/n 80-13-1m04-010 cable type lmr100/rg174/rg316 center gold body nickel assembly instruction a04 notes cable entry crimp 15.00 591 dia 25.10 988 10.00 394 centre contact soldered 22.00 866 3.20 126 dia 1.65 065 dia tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com 4.00 157 dia 6.25 246 dia website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 6

[close]

p. 8

cable connectors straight cable jacks female finish p/n 80-02-1m18-012 cable type rg58/lmr195 center gold body nickel 4.2 165 dia cmpter rohs assembly instruction a01 6.80 268 dia 8.00 315 dia notes cable entry crimp 30.00 [1.181 11.5 453 dia 7/16-28unef-2a 13.00 512 finish p/n 80-02-1m21-013 cable type lmr195/rg58 center gold body nickel 33.35 [1.313 11.5 453 dia 7/16-28unef-2a assembly instruction a03 notes cable entry clamp centre contact soldered sw 10.0 394 af sw 10.0 394 hex tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 7

[close]

p. 9

cable connectors straight bulkhead cable jacks female finish p/n 80-02-1a04-015 cable type lmr100/rg174/rg316 center gold 29.30 [1.154 cmpter rohs body nickel 1.65 065 dia 2.60 102 dia assembly instruction a01 3.20 126 dia mount hole m01 cable entry solder centre contact crimp 7/16-28unef-2a 1/2-28unef-2a 10.00 394 max 5 [max .197 10.00 394 sw 16.00 630 hex sw 17.00 669 hex finish p/n 80-02-2a14-016 cable type semi-rigid.141/rg402 center gold body nickel assembly instruction a04 mount hole m01 cable entry solder centre contact solder 7/16-28unef-2a 1/2-28unef-2a 10.00 394 max 5 [max .197 sw 16.00 630 hex sw 17.00 669 hex tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com 3.70 146 dia 27.00 [1.063 4.00 157 website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 8

[close]

p. 10

receptacles with solder end receptacles jacks female finish p/n 80-02-5b2-018 mount hole m02 center gold body nickel 3/8-32 unef-2a 2.03 080 dia cmpter rohs notes panel mounted 26.00 [1.024 12.00 472 2.00 079 14.00 551 dia 11.5 453 dia 7/16-28unef-2a finish p/n 80-02-5f1-019 mount hole m03 26.50 [1.043 center gold 1.40 055 dia 2.03 080 dia body nickel ia 2d notes panel mounted 18.20 717 2.30 091 17.50 689 sq 12.70 500 4 3.1 0 2 1 11.00 433 finish p/n 80-02-5f7-020 mount hole m03 25.30 996 18.20 717 12.70 500 center gold 2.03 080 dia 5.30 209 dia body nickel dia notes 17.50 689 sq 12.70 500 panel mounted 2.30 091 4 3.1 0 22 1 11.00 433 tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com 12.70 500 website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 9

[close]

p. 11

assembly instructions cmpter center contact body a01 ferrule stripping dimensions c b heatshrink sleeve option a p/n 80-03-1m18-001 80-02-1m18-012 80-03-1m10-004 80-03-1m01-005 cable type hex crimp tool mm [in 5.41 213 6.80 268 10.9 429 stripping length mm [in a b 2 079 c 11.5 453 12.5 492 4.5 177 2.5 098 14 551 lmr195/rg58 lmr240 lmr400 4 157 1 slide the heatshrink sleeve onto the cable option slide the ferrule onto the cable strip the cable as striping dimensions 3 4 slide the cable into the body until stops 1 1 2 5 slide the ferrule over the braid crimp the ferrule with crimping tool see table 2 2 slide the center contact on until it bottom against the cable dielectric solder the center contact onto the cable 2 1 1 6 3 fan the braid 1 cut the excess of braid if necessary slide the sleeve over the ferrule and heatshrink it in place option 2 1 tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 10

[close]

p. 12

assembly instructions cmpter guide pin body a02 ferrule stripping dimensions c b heatshrink sleeve option a p/n 80-03-1m04-002 80-02-1a04-015 cable type hex crimp tool mm [in 3.25 128 stripping length mm [in a 3 118 b 2.5 098 c 11 433 lmr100/rg174/rg316 1 slide the heatshrink sleeve onto the cable option slide the ferrule onto the cable strip the cable as striping dimensions 4 slide the cable into the body until stops 3 1 1 2 5 2 slide the guide pin on until it bottom against the cable dielectric solder the guide pin onto the cable slide the ferrule over the braid crimp the ferrule with crimping tool see table 2 2 1 1 6 3 fan the braid cut the excess of braid if necessary slide the sleeve over the ferrule and heatshrink it in place option 2 1 1 tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 11

[close]

p. 13

assembly instructions cmpter center contact body stripping dimensions a03 washer c b nut rubber insert sleeve a stripping length mm [in a 3 118 3.5 138 b 5 197 7 276 c 5 197 9 354 recommended coupling torque p/n 80-03-4m18-006 80-02-1m21-013 80-03-4m01-008 cable type lmr195/rg58 lmr400 450n·cm 1 slide the nut the washer the rubber and another washer onto the cable strip the cable as striping dimensions 2 4 slide the nut over the cable assembly 1 1 2 fold the braid back insert the insert sleeve into the cable under the braid until the back surface flush with the cable dielectric 5 screw sub-assembly into the body with wrench recommended coupling torque see table 1 2 1 3 slide the center contact on until it bottom against the cable dielectric solder the center contact 2 1 tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 12

[close]

p. 14

assembly instructions cmpter cap a04 heatshrink sleeve option ferrule stripping dimensions c b body a p/n 80-13-1m04-010 80-13-1m18-009 cable type lmr100/rg174/rg316 lmr195/rg58 hex crimp tool mm [in 3.25 128 5.41 213 stripping length mm [in a 1.5 059 2 079 b 11 433 7.5 295 c 18.5 728 17.5 689 1 slide the heatshrink sleeve onto the cable option slide the ferrule onto the cable strip the cable as striping dimensions 4 crimp the ferrule with crimping tool see table solder the inner conductor 1 2 3 1 2 2 fan the braid 1 5 place the cap into the body 1 3 push the body under the braid slide the ferrule over the braid 6 press on the cap until stops slide the sleeve over the ferrule and heatshrink it in place option 2 1 1 1 tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 13

[close]

p. 15

assembly instructions cmpter body stripping dimensions a05 center contact a heatshrink sleeve option stripping length mm [in p/n 80-02-2a14-016 cable type semi-rigid .141/rg402 a 4.0 157 notes 1 slide the heatshrink sleeve onto the cable option strip the cable as striping dimensions 1 4 solder the body onto the cable 1 2 2 slide the center contact on until it bottom against the cable dielectric solder the center contact onto the cable 2 1 5 slide the heatshrink sleeve over the body and heatshrink it in place option 1 3 slide the cable into the body until it stops 1 tel +86-511-8443 6131 fax +86-511-8502 5485 email sales@cmpter.com website www.cmpter.com #45 zhongshan east road zhenjiang 212003 jiangsu china 14

[close]