p. 1

competitor filter element interchange marine/military catalog

[close]

p. 2

indexes mil-spec reference eaton corporation supplies products that meet many military and federal specifications the extent of this capability is indicated in the following listing we have purposely omitted revision letters so that this list does not become outdated and restrictive in nature the marine and military group with prime responsibility for the specified product is the best and quickest source of information the address is as follows eaton 14615 lone oak road eden prairie mn 55344-2287 952 937-7190 or 952 937-7263 fax 952 937-7394 www.hydraulics.eaton.com specification description aeroquip hose part number mil-dtl-3992 type i class 1 airbrake hose medium pressure wire braid hose hose rubber fuel and oil hose rubber hydraulic 2665 2766 hose rubber wire reinforced fc163 fc162 150901 ae371 ae374 ae369 ae370-40 -48 ae372 ae373 hose rubber fiber reinforced 2580-80 through -192 2580-4 through -32 fc132 fittings end reusable for mil-h-24135 and mil-h-24136 flange class i ii iii iv v 37° flare o-ring seal union cpv split clamps with tail pieces 90° elbow hose to hose dogleg 180° elbow return hose to hose gasket seal union not for new construction walseal hose rubber hydraulic fc163 fittings for mil-dtl-13531 and mil-dtl-52471 hose rubber wire reinforced 2758 2554-6 303 302a 2565 fc173 mil-dtl-8794 mil-dtl-13444 type i type iii mil-dtl-13531 type i class a type ii class a mil-h-24135 mil-h-24135/1 mil-h-24135/2 mil-h-24135/4 mil-h-24135/5 mil-h-24135/9 mil-h-24135/10 mil-h-24135/12 mil-h-24135/13 mil-h-24136 mil-h-24136/1 mil-h-24136/3 mil-h-24136/4 mil-f-24787 mil-f-24787/1 mil-f-24787/2 mil-f-24787/3 mil-f-24787/4 mil-f-24787/5 mil-f-24787/6 mil-f-24787/7 mil-dtl-52471 type 100r2 mil-dtl-52525 mil-h-24595 2 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 3

indexes section index section pages master index 3-6 fh computer part number conversion chart 7 this catalog has been designed to include current and complete product information on the aeroquip hose and fittings most suited to naval and marine product applications information is indexed by part number by product type and by application on board ship detailed data is included on materials material specifications component part numbers and military specifications hose 8-23 fittings 24-141 adapters 142-144 accessories assembly instructions and assembly equipment 145-173 technical data 174-205 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 3

[close]

p. 4

introduction master part number index section pages part number page part number page part number page master index fh competitor part number conversion chart hose fittings adapters accessories assembly instructions and assembly equipment technical data 3-6 7 8-23 24-141 142-144 145-173 174-205 ae369 ae370 ae371 ae372 ae373 ae374 fc132 fc162 fc163 fc173 fc234 fc363 fc364 fc425 fc1198-s fc1198-1-s fc1266-4 fc2457-188 fc2457-1-188 fc2463-188 fc2463-407 fc2464-188 fc2465-188 fc2466-188 fc2467-188 fc2467-410 fc2468-188 fc2552-c fc2925-10 fc3056-4 fc3476-188 fc3477-188 fc3478-188 fc3479-188 fc3555-188 fc3557-188 fc3558-188 fc4307-4 fc5307-253 fc5707-108 fc5847-s fc5848-s fc5849-s fc5852-s fc5853-s fc5954-s 14 17 18 13 16 17 19 16 15 12 14 21 21 147 83-87 83-87 135 108-115 108-115 108 109 110 112 113 114 115 111 140 129 73 116-122 116-122 116 118 122 120 121 119 139 139 129 28 28 28 29 26 47 fc7031-206 41 fc7750-188 108 fc7751-188 110 fc7752-188 112 fc7753-188 113 fc7754-188 114 fc7754-410 115 fc7755-188 111 fc7780-188 110 fc7781-188 108 fc7781-410 109 fc7862-228 140 fc8223-4 74 fc8224-176 74 fc9056-463 73 fc9073-375 101 fc9074-375 103 fc9171 131 fc9224-463 74 fc9341 131 fc9423-375 66 fc9424-375 66 fc9425-375 67 fc9426-375 67 fc9506-463 73 fc9527-188 116 fc9528-188 122 fc9568-188 118 fc9583-375 100 fc9589-375 102 fc9635-188 120 fc9636-188 121 fc9637-188 117 fc9638-188 119 ff5001-188 66-67 101 103 123 ff5002-188 66-67 100 102 123 ff9003 123 ff9033 108-115 ff9142 116-122 ff9217 147 ff9411 108-115 ff9412 108-115 ff9700-262 148 fh9515 7 125 fj7023-s 30 fj7044-s 29 fj7358-s fj8343-4 fj8368-4 fj8525-4 fj8548-4 fj9068-s fj9343-41 fj9364-41 fj9366-41 fj9368-41 fj9369-41 fj9401-253 fj9486-b fj9525-253 fj9548-253 fj9706-s fj9707-s fj9708-s fj9709-s ft1013 ft1028 ft1033 ft1101 ft1211a ft1212 ft1215 ft1220 ft1222 ft1229 ft1230 ft1234 ft1260 ft1261 ft1281 ft1312 s1026 s1043 s1102 s1104 s1118 s1120 sc1681 sc1709 sc1772 07.001 07.002 30 86 85 138 132 26 86 83 84 85 87 135 26 138 132 43 43 44 44 155 156 156 153 154 157 159 153 154 157 159 157 158 157 158 156 153 160 155 160 153 154 154 154 153 153 154 154 154 153 154 153 32 47 4 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 5

introduction master part number index part number page part number page part number page part number page 07.003 07.006 07.021 07.024 07.025 07.026 07.036 07.114 07.122 07.155 07.340 07.390 07.421 302a 303 401-s 403-s 406-b 4-411 412-s 44-412 473a-c 624 4-1205 1206 1208 1210-b 4-1210 1212-b 4-1212 474-1218 188-1237 188-1239 4-1251 1266 1267 4-1290 1526 1561-s 1562 1563-s 1582-s 1583 1583-1 583-s 1597 46 32 31 45 31 46 47 32 30 48 44 30 45 12 12 34 41 34 33 35 35 128 147 88-104 127-129 133-140 50 53 56 33 49 51-52 55 49-67 33 49-67 105-107 66 101 106 33 128 127 33 155 157 157 157 157 158 158 157-158 157 1598 157 1599 157 1605 158 1606 158 4-2223 87 2556 11 2565 11 2580 -4 thru -32 15 2580 -80 thru -192 19 2665 13 2758 20 2766 18 2807 22 2808 22 4-4010 68-74 4-4013 68-78 4-4103 69 75 4-4103-4 69 75 188-4112 89 91-93 105 407-4112 90 94 4-4202 68 4401-s 34 4402-s 36 4-4202 68 4411-s 34 4412-s 35 4414-s 37 4706-s 79 4-4721 69 4-4722 68 4729-s 79 4730-s 79 4-4730 75 4738-b 26 4739-b 27 4740-b 27 4741-b 27 4742-b 27 4743-b 28 4750-b 28 4753-b 26 4772-b 28 4775-s 39 4776-s 39 4777-s 40 4779-s 40 4797-b 27 14-21002 125 4-21004 88-104 4-21023 88-104 21027-s 83-87 21028-s 83-87 22006 123-124 126 22015 49-53 126 22020 123-124 126 22550 49-53 126 188-72019 123 188-72039 123 188-72462 123 188-72463 123 4-73458 87 4-73461 71 74021 140 188-74021 57-63 89 95 108 110 407-74021 58 62 90 96 109 407-74031 94 188-74045 73-74 92 98 105 108 188-74048 150901 188-180005 407-185029 188-185093 407-185093 188-185109 407-185109 188-185203 188-185204 188-185212 188-185215 188-185249 474-1218-1 188-185029 63-185535 185535-c 4-186301 4-186302 4-186304 4-186305 4-186314 4-186324 4-186348 110 116 93 99 118 119 20 59 64 65 91 97 62 54-55 54 57-59 58 104 107 104 106 105 67 107 60 61 63-65 137 134 52-53 55-56 71 77 72 78 86 87 83 190000-s 66-190016 66-190093 375-190093 412-190093 66-190103 66-190109 375-190109 412-190109 190111-s 66-190124 375-190124 412-190124 473-190210 473-190215 473-190216 190235-s 120260-s 190261-s 190265-s 38-190268 190276-s 190277-s 190295-s 190296-s 190297-s 190299-s 190301-s 190302-s 190325-s 190327-s 190328-s 190350-s 190371-s 473-190388 473-190390 190463-s 190465-s 190468-s 190469-s 190470-s 190516-s 190528-s 190535-c 63-190535 190600-c 36 59 54 55 54 64,65 57 58 58 41 60-61 63 62 107 105 106 42 38 38 37 136 41 41 38 38 37 37 38 38 42 29 29 42 42 105 106 36 29 80 80 80 29 79 134 137 128 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 5

[close]

p. 6

introduction master part number index part number page part number page 63-190600 190627-c 38-190627 190628-c 375-190655 375-190656 190672-b 375-190717 375-190751 375-190752 375-190757 375-190758 375-190767 412-190767 375-190769 190772 190773 375-190781 375-190784 375-190785 375-190786 190846-s 4-190885 4-190909 66-190911 4-190911 375-190911 93-190911 411-190911 190944-s 63-190990 190997-s 4-191301 93-191301 4-191302 93-191302 4-191304 4-191307 4-191308 191321-s 191395-s 4-202140 4-202142 446-202232 4-202240 4-202242 130 127 130 133 91 97 27 88 92 93 98 99 89 90 95 131 131 101 102 103 104 39 76 70 50 49 49 50 51 29 130 81 52 53 55 56 71 77 78 29 40 143 143 144 144 144 4-210005 4-210200 220572-c 4-220643 4-220657 188-220779 4-220779 408-220779 222019s 222022 4-222048 4-222075 2580-4 thru -32 2580 -80 thru -192 472003-s 474403-s 474503-s 476003-s 476703-s 479001-s 479003-s 188-500063 188-500189 900515 900564 900568 900705 900729 115-900757 900758 900762 900952 4-921641 191321-s 412-190814 413-190769 375-190780 222005 4-191305 220554-b 220572-b 107 107 133 70 84 49-50 49-50 51 158 146 116-122 87 15 19 81 80 81 81 82 82 82 123 123 133-140 146 127-132 146 148 125 125 125 146 52-53 29 94 96 100 146 72 137 136 6 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 7

introduction fh computer part number conversion to aeroquip part number example of old part no 67-190016-1 1/2-32 material base no hose size fitting size nom example of new part no fh9007-2432-67 new base no material hose size fitting size nom 16ths of inch old aeroquip part no new aeroquip part no old aeroquip part no new aeroquip part no old aeroquip part no new aeroquip part no old aeroquip part no new aeroquip part no 1239 2020 2084 4112 72020 72042 72465 73461 73472 74021 74031 74048 74414 40204 124204 180005 185014 185029 185109 185174 185203 185204 185205 185212 185219 185221 185226 190717 190751 190752 190753 190754 190757 190758 190764 190767 fh9525 fh9552 fh9555 fh9517 fh9549 fh9500 fh9543 fh9526 fh9536 fh9527 fh9558 fh9540 fh9550 fh9000 fh9518 fh9501 fh9519 fh9502 fh9528 fh9529 fh9503 fh9504 fh9530 fh9505 fh9506 fh9531 fh9507 fh9072 fh9028 fh9029 fh9030 fh9031 fh9032 fh9033 fh9082 fh9034 190769 190780 190781 190783 190784 190785 190786 190814 190887 190908 190909 190911 190912 191301 191303 191304 191305 191312 191313 191315 191316 191443 191444 202103 202113 202142 202204 202222 202222 202223 202232 202237 202242 202701 202702 185226 fh9035 fh9036 fh9037 fh9038 fh9039 fh9040 fh9041 fh9083 fh9042 fh9043 fh9044 fh9045 fh9046 fh9047 fh9048 fh9049 fh9085 fh9050 fh9051 fh9052 fh9053 fh9054 fh9077 fh9508 fh9551 fh9538 fh9509 fh9057 fh9510 fh9511 fh9567 fh9512 fh9537 fh9569 fh9513 fh9507 185229 185249 185391 185660 185713 185887 185908 186301 186303 186304 186312 186313 190014 190016 190103 190109 190124 190162 190163 190164 190173 190174 190183 190205 190210 190212 190216 190219 190225 190232 190233 190234 190237 190248 190252 190286 fh9532 fh9533 fh9001 fh9002 fh9003 fh9058 fh9062 fh9059 fh9004 fh9060 fh9005 fh9027 fh9066 fh9007 fh9008 fh9009 fh9010 fh9075 fh9011 fh9012 fh9066 fh9067 fh9074 fh9071 fh9013 fh9014 fh9015 fh9016 fh9068 fh9070 fh9080 fh9017 fh9018 fh9056 fh9069 fh9019 190388 190390 190467 190490 190642 190655 190656 190660 190713 203002 203002 203003 203004 203005 203009 203102 210000 210203 220625 220643 220657 220779 221501 420302 420306 500083 500165 504046 900841 fh9020 fh9073 fh9078 fh9021 fh9022 fh9023 fh9024 fh9025 fh9026 fh9514 fh9061 fh9546 fh9545 fh9547 fh9548 fh9553 fh9515 fh9516 fh9534 fh9520 fh9521 fh9522 fh9557 fh9523 fh9524 fh9079 fh9063 fh9064 fh9055 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 7

[close]

p. 8

hose hose part number index section pages master index fh competitor part number conversion chart hose fittings adapters accessories assembly instructions and assembly equipment technical data 3-6 7 8-23 24-141 142-144 145-173 174-205 hose and accessories low pressure 2565 2556 medium pressure 303/302a fc163 fc173 2665 ae372 fc234 ae369 2580 -4 thru -32 high pressure ae373 fc162 ae374 ae370 ae371 2766 large bore fc132 2580 -80 thru -192 150901 2758 ptfe teflon fc363 fc364 2807 2808 special 678 hose assemblies teflon is a dupont trademark page 11 11 12 15 12 13 13 14 14 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 8 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 9

hose how to order how to order accurate processing and prompt delivery of your order depends on easy identification of your requirements please order eaton aeroquip parts using correct part numbers as described in this catalog inquiries and orders should be directed to your eaton aeroquip distributor or eaton 14615 lone oak road eden prairie mn 55344-2287 952 937-7190 or 952 937-7262 fax 952 937-7394 www.hydraulics.eaton.com part numbers and dash sizes dash size designates the nominal size in 16ths of an inch this number immediately follows the part number and is separated from it with a dash dimensions dimensions given in this catalog for eaton aeroquip products are approximate and should be used for reference only exact dimensional information for a given product is subject to change and varying tolerances contact eaton directly for full current information hose assemblies eaton manufactures the terminal ends of our hose fittings to the appropriate requirements established by the sae therefore the performance ratings of these hose fittings meet the sae/mil spec requirements it is possible to order a hose assembly with a fitting terminal end that has a performance rating lower than the hose rating when ordering hose assemblies please keep the connecting end performance rating in mind since this may affect overall hose assembly performance hose assembly components hose and fittings are easily assembled in the field however factory assembled reusable and crimped hose assemblies are available for complete information contact eaton cut length hose cut lengths of hose should be ordered as shown below by specifying lengths in inches for numeric part numbers hose type hose size in 16ths of an inch cut length in inches last digit is in 1/8ths of an inch 00484 481/2 inches for alpha-numeric part numbers hose type hose dash size cut length in inches last digit is in 1/8ths of an inch 00484 481/2 inches bulk hose bulk hose should be ordered by specifying length in feet as shown below complete numbers quantity in feet hose type hose size in 16ths of an inch note length tolerance for hose assemblies and sleeves is up to and including 12 inches ±1/8 above 12 inches to and including 18 inches ±3/16 above 18 inches to and including 36 inches ±1/4 above 36 inches ±1 of length 150 ft ae372 10 fc163 08 00484 ae369 10 00484 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 9

[close]

p. 10

hose hose pressure by size hose dash size to maximum operating pressure this table is intended as a guide in the selection of hose by maximum operating pressure it is not a guarantee final selection is further dependent on fluid and ambient temperature concentration of agent intermittent or continuous exposure etc part number page hose dash size -3 -4 -5 -6 -8 -10 -12 -16 -20 -24 -32 -40 -48 -64 -80 -96 -128 -160 -192 2556 2565 2758 ae370 302a fc132 2580 150901 fc363 fc364 fc173 fc234 2665 2808 2807 ae372 ae369 303 2766 fc163 ae371 ae373 ae374 fc162 11 11 20 17 12 19 15 19 20 21 21 12 14 13 22 22 3000 13 14 12 18 15 18 16 17 16 360 300 300 250 300 200 250 175 250 125 500 350 800 600 450 500 400 350 1000 900 600 300 1200 900 600 300 300 200 150 350 500 500 200/450 350 1000 800 650 625 1250 1250 1000 1250 2000 2750 2000 2000 2000 2000 3500 3500 3500 4250 7500 4000 600 550 1100 1100 750 750 1250 1750 1200 1500 1500 1500 2250 2250 2250 3000 6250 3000 500 1000 1000 375 400 1000 1500 1000 800 800 2000 2000 2000 2500 5000 3000 1000 750 1000 750 100 1500 2750 3000 3000 3000 3000 5000 5000 5750 3000 3000 3000 3000 1000 1500 2250 2500 2250 2250 2000 4000 4000 4000 5000 4500 875 1250 1500 2500 1500 1750 1750 1750 2750 2750 3250 1125 800 625 625 500 625 500 1625 1625 1625 2250 4000 1250 1250 1250 1750 3000 300 350 1000 1125 1125 1500 3000 300 350 applicable only when using segmented type marine fittings 10 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 11

hose 2556 low pressure socketlesstm part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds 2556-4 2556-6 2556-8 2556-10 2556-12 .27 .38 .50 .63 .75 .50 .62 .75 .91 1.03 360 300 300 250 250 page 1440 1200 1200 1000 1000 rubber cover 3.00 3.00 5.00 6.00 7.00 28 28 28 18 18 .08 .14 .17 .22 .26 fitting reference construction synthetic rubber tube textile braid reinforcement synthetic application for gasoline crude fuel and lubricating oils air and water pipe sae 37° steel sae 45° universal compression type accessories see page assembly instructions see page 26 27-29 26-32 27-29 27-29 28 149-152 165 does not provide a fire-resistant product per uscg requirements table 56 60-25 c uscg 115 title 46 however it does have a self-extinguishing cover for more specific information on fluid applications see page 176 operating temperature range ­40°f to +180°f 40°c to 82°c air not to exceed +160°f 71°c water not to exceed +150°f 66°c 2565 low pressure socketlesstm meets mil-dtl-13444 type 1 class a hose and sae 30r2 type 1.1 part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds 2565-4 2565-6 2565-8 2565-10 2565-12 .25 .38 .50 .63 .75 .50 .63 .78 .97 1.09 300 250 200 175 125 page 1250 1000 750 700 500 synthetic rubber cover 2.25 3.00 3.75 4.75 5.50 20 20 10 10 10 .09 .12 .17 .28 .30 fitting reference construction synthetic rubber inner tube textile braid reinforcement and application gasoline crude fuel and lubricating oils air and water for more specific information on fluid application see page 176 operating temperature range -65°f to +250°f 54°c to +121°c air not to pipe sae 37° steel sae 45° universal compression type accessories see page assembly instructions see page 26 27-29 26-32 27-29 27-29 28 149-152 165 exceed +160°f 71°c maximum water not to exceed +150°f 66°c eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 11

[close]

p. 12

hose 303 302a medium pressure meets mil-dtl-8794 maximum operating pressure minimum burst pressure minimum bend radius part hose number i.d hose o.d vacuum service weight per foot inches inches psi psi inches inch/hg pounds 303-4 303-5 303-6 303-8 303-10 303-12 302a16 302a20 302a24 302a32 .19 .25 .31 .41 .50 .62 .88 1.12 1.38 1.81 .52 .58 .68 .77 .92 1.08 1.23 1.50 1.75 2.22 3000 3000 2000 2000 1750 1500 800 600 500 350 page 12000 10000 9000 8000 7000 6000 3200 2500 2000 1400 3.00 3.38 4.00 4.62 5.50 6.50 7.38 9.00 11.00 13.25 28 28 28 28 28 28 28 28 28 28 .13 .16 .23 .26 .37 .46 .44 .52 .67 .94 fitting reference construction synthetic rubber tube cotton inner braid single wire braid sae 37° cpv dogleg flange split clamp steel accessories see page assembly instructions see page 33 49-53 54-56 57-65 66-67 34-48 149-152 166 reinforcement and synthetic rubber impregnated textile braid cover application for hydraulics air gasoline fuel and lubricating oils for more specific information on fluid applications see page 176 operating temperature range 303 -65°f to +250°f 54°c to +121°c 302a -40°f to +250°f 40°c to +121°c fc173 medium pressure meets mil-dtl-13444 type iii part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds fc173-06 fc173-08 fc173-10 fc173-12 fc173-16 .31 .41 .50 .63 .88 .62 .74 .83 .96 1.21 1000 1000 875 750 375 4000 4000 3500 3000 1500 1.25 1.75 2.25 2.75 3.50 .15 .18 .23 .25 .32 fitting reference for fittings contact eaton construction oil resistant inner tube textile braid single wire braid and synthetic rubber impregnated textile braided cover application diesel fuel gasoline hot lube oil water air operating temperature range -55°f to +300°f 49°c to +150°c 12 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 13

hose 2665 high pressure meets mil-dtl-13531 type 1 class a part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds 2665-4 2665-6 2665-8 2665-10 2665-12 2665-16 .25 .38 .50 .63 .75 1.00 .63 .78 .91 1.03 1.19 1.50 2750 2250 2000 1500 1250 1000 page 11000 9000 8000 6000 5000 4000 4.00 5.00 7.00 8.50 9.50 11.00 .19 .30 .39 .46 .53 .80 fitting reference construction synthetic rubber tube single steel wire braid reinforcement crimp fittings avaiable contact eaton accessories see page and ozone and fungus resistant neoprene outer cover 149-152 application hydraulics fuel lubricating oils and gasoline and water for more specific information on fluid compatibility see page 176 operating temperature range -65°f to +250°f 54°c to +121°c ae372 medium pressure abs approved hose meets mil-h-24135/12 non-mil-spec part number fc300 part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds ae372-4 ae372-5 ae372-6 ae372-8 ae372-10 ae372-12 ae372-16 ae372-20 ae372-24 ae372-32 ae372-40 .19 .25 .31 .41 .50 .62 .88 1.12 1.38 1.81 2.38 .52 .58 .68 .77 .92 1.08 1.23 1.50 1.75 2.23 2.88 3000 3000 2250 2000 1750 1500 800 625 500 300 300 page 12000 12000 9000 8000 7000 6000 3200 2500 2000 1200 1200 3.00 3.38 4.00 4.62 5.50 6.50 7.38 9.00 10.50 13.25 24.00 28 28 28 28 28 28 20 20 15 11 8 .15 .19 .23 .28 .39 .47 .41 .59 .72 .90 1.63 fitting reference sae 37° cpv dogleg flange split clamp steel crimp fittings avaiable contact eaton accessories see page assembly instructions see page 33 49-53 54-56 57-65 66-67 34-48 construction aqp elastomer tube polyester inner braid single wire braid reinforcement and polyester braid cover blue for identification application hydraulics handling petroleum based fluids air gasoline fuel and lubricating oil and other industrial fluids exceeds sae100r5 and j1019 and is navsea approved for shipboard applications per 9505 opr 56y231 ser 56y23/650 for more specification information on fluid applications see page 176 operating temperature range suitable for many applications between 55°f and +300°f 49°c to +150°c air not to exceed +250°f 121°c maximum negative pressures shown for -16 and larger are suitable only for hose which has suffered no external damage or kinking if greater negative pressures are required for -16 and larger hoses the use of an internal support coil is recommended does not comply with sae100r5 operating pressure of 350 psi or minimum burst of 1400 psi 149-152 166 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 13

[close]

p. 14

hose fc234 medium pressure abs approved meets fire resistant per uscg sae j1942 meets marine fuelhose per sae j1527 type a1 part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds fc234-05 fc234-06 fc234-08 fc234-10 fc234-12 fc234-16 .25 .31 .41 .50 .63 .88 .58 .68 .76 .94 1.08 1.24 1500 1500 1250 1250 750 400 page 6000 6000 5000 5000 3000 1600 1.00 1.25 1.75 2.25 2.75 3.50 28 28 28 28 20 16 .22 .25 .30 .45 .48 .51 fitting reference construction aqp elastomer tube brass plated steel wire reinforce sae 37° cpv dogleg flange split clamp steel accessories see page assembly instructions see page 33 49-53 54-56 57-65 66-67 34-38 149-152 166 ment braided refractory insulation and blue aqp elastomer cover application hydraulic crude fuel and lubricating oils gasoline water and phosphate-ester based hydraulic fluids for more specific information on fluid compatibility see page 176 operating temperature range ­40°f to +300°f 40°c to +150°c ae369 medium pressure abs approved meets mil-h-24135/10 non-mil spec part number 2651 part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds ae369-4 ae369-5 ae369-6 ae369-8 ae369-10 ae369-12 ae369-16 ae369-20 ae369-24 ae369-32 ae369-40 .19 .25 .31 .41 .50 .62 .88 1.12 1.38 1.81 2.38 .52 .58 .67 .77 .92 1.08 1.23 1.50 1.75 2.22 2.88 3000 3000 2250 2000 1750 1500 800 625 500 350 350 page 12000 12000 9000 8000 7000 6000 3200 2500 2000 1400 1400 3.00 3.38 4.00 4.62 5.50 6.50 7.38 9.00 10.50 13.25 24.00 28 28 28 28 28 28 20 20 15 11 11 .17 .18 .24 .27 .38 .47 .45 .57 .67 .94 1.43 fitting reference construction synthetic rubber tube textile inner braid single steel wire sae 37° cpv dogleg flange split clamp steel accessories see page assembly instructions see page 14 33 49-53 54-56 57-65 66-67 34-38 149-152 166 braid textile outer braid synthetic rubber cover application hydraulics fuel and lube oils fresh and salt water low pressure air nitrogen and butane approved per technical directive for piping devices ­ flexible hose assemblies s6430-ae-ted-010 volume 1 for more specific information on fluid compatibility see page 176 operating temperature range -40°f to +212°f 40°c to +100°c internal support coil required maximum negative pressures shown for -16 and larger are suitable only for hose which has suffered no external damage or kinking if greater negative pressures are required for -16 and larger hoses the use of an internal support coil is recommended eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 15

hose 2580 medium pressure meets mil-h-24136/3 maximum operating pressure minimum burst pressure minimum bend radius part hose number i.d hose o.d vacuum service weight per foot inches inches psi psi inches inch/hg pounds 2580-4 2580-5 2580-6 2580-8 2580-10 2580-12 2580-16 2580-20 2580-24 2580-32 .19 .25 .31 .41 .50 .62 .88 1.12 1.38 1.81 .52 .58 .67 .77 .92 1.08 1.23 1.50 1.75 2.22 1000 800 650 625 600 550 500 450 400 350 page 4000 3200 2600 2500 2400 2200 2000 1800 1600 1400 3.00 3.38 4.00 4.62 5.50 6.50 7.38 9.00 10.50 13.25 28 28 28 28 28 coil coil coil coil coil .12 .15 .17 .19 .28 .34 .36 .43 .51 .75 fitting reference sae 37° cpv dogleg flange split clamp steel accessories see page assembly instructions see page 33 49-53 54-56 57-65 66-67 34-38 149-152 167 construction synthetic rubber tube double textile braid reinforcement and synthetic rubber cover application fresh and salt water systems fuel systems oil applications and low pressure air ref technical directive for piping devices ­ flexible hose assemblies s6430-ae-ted-010 volume 1 for sizes -4 thru -32 have been approved by individual nav sec letters for more specific information on fluid applications see page 176 operating temperature range ­40°f to +200°f 40°c to +93°c internal support coil is required fc163 high pressure meets mil-h-24135/1 meets mil-dtl-52471 type 100r2 part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds fc163-06 fc163-08 fc163-10 fc163-12 fc163-16 fc163-20 fc163-24 fc163-32 .38 .50 .62 .75 1.00 1.25 1.50 2.00 .84 .97 1.09 1.25 1.56 2.00 2.25 2.75 4000 3500 2750 2250 2000 1625 1250 1125 page 16000 14000 11000 9000 8000 6500 5000 4500 5.00 7.00 8.00 9.50 12.00 16.50 20.00 25.00 coil coil coil coil coil .49 .56 .63 .78 1.08 1.60 1.88 2.45 fitting reference construction synthetic rubber tube double-wire braid reinforcement pipe sae 37° cpv dogleg flange accessories see page assembly instructions see page 68 69 70-71 72 73-74 149-152 168 and synthetic rubber cover application hydraulics fuel and lube oils salt and fresh water for more specific information on fluid applications see page 176 operating temperature range ­40°f to +200°f 40°c to +93°c internal support coil is required eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 15

[close]

p. 16

hose ae373 high pressure meets mil-h-24135/13 non mil-spec part number fc195 part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds ae373-4 ae373-6 ae373-8 ae373-10 ae373-12 ae373-16 ae373-20 ae373-24 ae373-32 .25 .38 .50 .62 .75 1.00 1.25 1.50 2.00 .69 .84 .97 1.09 1.25 1.56 2.00 2.25 2.75 5000 4000 3500 2750 3000 2000 1650 1750 1250 page 20000 16000 14000 11000 12000 8000 6600 7000 5000 blue aqp elastomer cover 4.00 5.00 7.00 8.00 9.50 12.00 16.50 20.00 25.00 .31 .42 .51 .59 .75 1.04 1.68 1.91 2.39 fitting reference construction aqp elastomer tube double wire braid reinforcement and application high pressure hydraulics petroleum based fluids and fire pipe sae 37° cpv dogleg flange accessories see page assembly instructions see page 68 69 70-71 72 73-74 149-152 168 resistant types for more specific information on fluid applications see page 176 operating temperature range -40°f to +300°f 40°c to +150°c fc162 high pressure meets mil-h-24135/2 part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds fc162-06 fc162-08 fc162-12 fc162-16 .38 .50 .75 1.00 .84 .97 1.23 1.56 4500 4000 3000 3000 page 18000 16000 12000 12000 5.00 7.00 9.50 11.00 coil coil .46 .52 .82 1.25 fitting reference construction synthetic rubber tube partial textile braid 4-light spiral sae 37° cpv dogleg steel accessories see page assembly instructions see page 75 76-77 78 79-82 149-152 168 wire reinforcement and synthetic rubber cover application hydraulics fuel and lube oils salt and fresh water particularly recommended for hydraulic systems that have high surge peaks and/or severe operating conditions for more specific information on fluid applications see page 176 operating temperature range -40°f to +200°f 40°c to +100°c internal support coil is required 16 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 17

hose ae374 high pressure abs approved meets mil-h-24135/9 non mil-spec part number fc254 part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds ae374-8 ae374-12 ae374-16 ae374-20 ae374-24 ae374-32 .50 .75 1.00 1.25 1.50 2.00 .98 1.26 1.51 1.80 2.11 2.68 7500 6250 5000 4000 3000 3000 page 30000 25000 20000 16000 12000 12000 8.00 11.00 12.00 16.50 20.00 25.00 .73 1.09 1.35 2.03 2.33 3.10 fitting reference sae 37° cpv dogleg 180° return accessories see page assembly instructions see page 83 84-85 86 87 149-152 170 construction synthetic rubber tube four heavy spiral wire reinforcement and synthetic rubber cover application high pressure hydraulic systems particularly recommended for systems subjected to high surge peaks and severe operating conditions for specific information on fluid compatibility see page 176 operating temperature range ­40°f to +250°f 40°c to +121°c warning fittings designed for 2786/fc165 are not to be used on ae374 ae370 large bore meets mil-h-24135/10 non mil-spec part number 2652 part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds ae370-40 2.50 ae370-48 3.00 ae370-48 3.00 3.09 3.59 3.59 page 350 200 450 35 54-55 88 45 57 57 59 61 65 89-99 66-67 100-103 104 149-152 170 1400 800 1800 24.00 33.00 33.00 coil 11 coil 2.00 2.10 2.10 fitting reference pipe dogleg steel flange split clamp 108° return accessories see page assembly instructions see page construction synthetic rubber tube textile inner braid single steel wire braid reinforcement outer textile braid and synthetic rubber cover application hydraulics fuel and lube oils fresh and salt water low pressure air nitrogen and butane approved per technical directive for piping devices ­ flexible hose assemblies s6430-ae-ted-010 volume 1 ae370-40 hose utilizes segmented socket fittings only ae370-48 hose utilizes either screw together or segmented socket fittings for more specific information on fluid compatibility see page 176 operating temperature range -40°f to +275°f 40° c to +100°c internal support coil is required applicable only when using segment type marine fittings eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 17

[close]

p. 18

hose ae371 high pressure air meets mil-h-24135/5 non mil-spec part number 1529 part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds ae371-4 ae371-6 ae371-8 ae371-10 ae371-12 ae371-16 ae371-20 ae371-24 ae371-32 .25 .38 .50 .63 .75 1.00 1.25 1.50 2.00 .69 .84 .97 1.09 1.25 1.56 1.98 2.25 2.75 page 5000 4000 3500 2750 2250 2000 1625 1250 1125 68 69 70-71 72 73-74 149-152 168 20000 16000 14000 11000 9000 8000 6500 5000 4500 4.00 5.00 7.00 8.00 9.50 12.00 16.50 20.00 25.00 coil coil coil coil coil .34 .44 .64 .65 .82 1.00 1.95 2.02 2.70 fitting reference construction synthetic rubber tube double wire braid reinforcement pipe sae 37° cpv dogleg flange accessories see page assembly instructions see page textile braid and perforated synthetic rubber cover application for pneumatic applications perforated cover prevents blistering assures better high pressure service and approved per technical directive for piping devices-flexible hose assemblies s6430ae-ted-010 volume 1 for more specific information on fluid compatibility see page 176 operating temperature range -40°f to +212°f 40°c to +100°c to prevent blistering when used for pneumatic applications internal support coil is required 2766 high pressure meets mil-dtl-13531 type ii class a part hose number i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds 2766-4 2766-6 2766-8 2766-12 2766-16 2766-20 2766-24 2766-32 .25 .37 .50 .75 1.00 1.25 1.50 2.00 .69 .84 .97 1.25 1.56 2.00 2.25 2.75 page 5000 4000 3500 2250 2000 1625 1250 1000 68 69 70-71 72 73-74 149-152 168 20000 16000 14000 9000 8000 6500 5000 4500 4.00 5.00 7.00 9.50 11.00 16.00 20.00 22.00 .32 .46 .54 .75 1.02 1.63 1.94 2.69 fitting reference construction synthetic rubber inner tube double wire braid pipe sae 37° cpv dogleg flange accessories see page assembly instructions see page 18 reinforcement and synthetic rubber cover application for high pressure hydraulics crude fuel and lubricating oils gasoline operating temperature range ­65°f to +250°f 54°c to +93°c eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 19

hose fc132 large bore meets mil-h-24136/4 maximum operating pressure minimum burst pressure minimum bend radius part number hose i.d hose o.d vacuum service weight per foot inches inches psi psi inches inch/hg pounds fc132-40 fc132-48 fc132-64 2.50 3.00 4.00 3.30 3.80 4.86 1000 900 600 page fitting reference flange dogleg split clamp trailpiece assembly accessories see page assembly instructions see page 116-119 122 120-121 123-126 149-152 171 4000 20.00 coil 2.25 3600 24.00 coil 2.55 2400 30.00 sleeve 3.15 construction synthetic rubber tube and cover with four layers of synthetic yarn reinforcement for sizes -40 and -48 and six layers of synthetic yarn reinforcement for size -64 application fresh and salt water systems oil applications and fuel systems for more specific information on fluid applications see page 176 operating temperature range ­40°f to +200°f 40°c to +100°c internal support coil or sleeve is required 2580 large bore meets mil-h-24136/1 part number hose i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds 2580-80 2580-96 2580-128 2580-160 2580-192 5.00 6.00 8.00 10.00 12.00 5.88 6.88 8.94 10.94 13.12 300 300 300 200 150 page 1200 1200 1200 800 600 36.00 42.00 54.00 66.00 78.00 sleeve sleeve sleeve sleeve sleeve 3.90 5.00 7.00 8.50 12.00 fitting reference construction synthetic rubber tube multiple layers of synthetic yarn flange split clamp dogleg accessories see page assembly instructions see page 108-110 111-113 114-115 149-152 172 reinforcement and synthetic rubber cover application fresh and salt water systems fuel systems oil applications and low pressure air ref technical directive for piping devices ­ flexible hose assemblies s6430-ae-ted-010 volume 1 for sizes -80 thru -192 have been approved by individual nav sec letters for more specific information on fluid applications see page 176 operating temperature range ­40°f to +200°f 40°c to +100°c internal support sleeve is required eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 19

[close]

p. 20

hose 150901 large bore meets mil-h-24135/4 maximum operating pressure minimum burst pressure minimum bend radius part number hose i.d hose o.d vacuum service weight per foot inches inches psi psi inches inch/hg pounds 150901-40 150901-48 150901-64 2.50 3.00 4.00 3.09 3.59 4.70 1200 900 600 page 4800 3600 2400 26.00 30.00 33.00 coil coil sleeve 2.97 3.33 3.69 fitting reference construction synthetic rubber tube textile inner braid 64 size only dogleg flange split clamp 180° return accessories see page assembly instructions see page 88 89-99 100-103 104 149-152 170 double steel wire braids reinforcement and synthetic rubber cover application petroleum based products particularly fuel and lube oils salt and fresh water approved for technical directive for piping devices ­ flexible hose assemblies s6430-ae-ted-010 volume 1 for more specific information on fluid compatibility see page 176 operating temperature range -40°f to +200°f 40°c to +93°c internal support coil or sleeve is required 2758 large bore qualified to mil-h-24595 part number hose i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds 2758-80 2758-96 5.00 6.00 5.91 6.91 500 350 page 2000 1400 thetic rubber cover 42.00 48.00 sleeve sleeve 7.13 8.08 fitting reference construction synthetic rubber tube spiral wire reinforcement and synapplication petroleum base products particularly fuel and lube oils salt dogleg flange split clamp accessories see page assembly instructions see page 105 105-106 106-107 149-152 173 and fresh water approved per technical directive for piping devicesflexible hose assemblies s6430-ae-ted-010 volume 1 for more specific information on fluid compatibility see page 176 operating temperature range -20°f to +150°f 29°c to +65°c internal support sleeve is required 20 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 21

hose fc363 convoluted ptfe hose nonconductive tube maximum operating pressure minimum burst pressure minimum bend radius part number hose i.d hose o.d vacuum service weight per foot inches inches psi psi inches inch/hg pounds fc363-08 fc363-12 fc363-16 fc363-20 fc363-24 fc363-32 .54 .81 1.00 1.24 1.52 2.00 .74 1.06 1.28 1.53 1.81 2.31 1250 1100 1000 1000 750 500 page 5000 4400 4000 4000 3000 2000 2.88 3.75 5.00 6.25 7.50 10.00 28 28 24 20 12 5 .16 .28 .42 .46 .55 .79 fitting reference construction convoluted nonconductive ptfe tube with stainless steel sae 37° flange accessories see page 141 141 149-152 single wire braid cover application chemical food water and waste handling and various transfer applications not recommended for steam-cold water cycling for more specific information on fluid compatibility see page 176 approved for u.s navy shipboard applications per 9505 opr 56y231 ser 56y23/849 operating temperature range -65°f to +400°f 54°c to +205°c steam 200 psi at +388°f max engineering information is available for specific critical temperature requirements contact eaton fc364 convoluted ptfe hose conductive tube part number hose i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds fc364-08 fc364-12 fc364-16 fc364-20 fc364-24 fc364-32 fc364-40 .54 .81 1.00 1.24 1.52 2.00 2.53 .74 1.06 1.27 1.53 1.81 2.31 2.90 1250 1100 1000 1000 750 500 100 page 5000 4400 4000 4000 3000 2000 400 2.88 3.75 5.00 6.25 7.50 10.00 12.50 28 28 24 20 12 5 5 .16 .28 .42 .43 .55 .79 1.35 fitting reference construction convoluted conductive ptfe tube with stainless steel sae 37° flange accessories see page 141 141 149-152 single wire braid cover application steam lines and fuel transfer applications where static dissipation is required not recommended for steam-cold water cycling for more specific information on fluid compatibility see page 176 approved for u.s navy shipboard applications per 9505 opr 56y231 ser 56y23/849 operating temperature range -65°f to +400°f 54°c to +204°c steam 200 psi at +388°f max engineering information is available for specific critical temperaturerequirements contact eaton eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 21

[close]

p. 22

hose 2807 ptfe hose sae 100r14 part number hose i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds 2807-3 2807-4 2807-5 2807-6 2807-8 2807-10 2807-12 2807-16 2807-20 fitting reference page .14 .19 .26 .32 .42 .51 .64 .88 1.12 .25 .30 .37 .43 .54 .63 .76 1.03 1.29 3000 3000 3000 2500 2000 1500 1200 1000 625 12000 12000 12000 10000 8000 6000 4800 4000 2500 1.50 2.00 3.00 4.00 5.25 6.50 7.75 9.00 16.00 28 28 28 28 28 28 28 12 12 .04 .06 .08 .10 .12 .16 .18 .26 .35 pipe sae 37° cpv brass/steel dogleg accessories see page assembly instructions see page 127 128 129 130-131 132 149-152 169 construction extruded ptfe tube single stainless steel wire braid reinforcement cover application temperature range and chemical inertness make teflon hose suitable for a variety of applications some are potable water electronic cooling hot lube oil compressor discharge saturated steam 200 psi max and most chemicals for more specific information on fluid compatibility see page 176 approved for u.s navy shipboard applications per sea 53217 9055 ser 312 not recommended for steam-cold water cycling operating temperature range -100°f to +500°f 74°c to +260°c steam 200 psi at +388° f max engineering is available for specific critical temperature requirements contact eaton maximum negative pressures shown for -16 and larger are suitable for hose which has suffered no external damage or kinking if greater negative pressures are required for -16 and larger hoses the use of an internal support coil is required use of an internal support coil in -6 and larger teflon hose is recommended for true support where extended or continuous service at high temperature together with low or negative pressure 2808 ptfe part number hose i.d hose o.d maximum operating pressure minimum burst pressure minimum bend radius vacuum service weight per foot inches inches psi psi inches inch/hg pounds 2808-8 2808-10 2808-12 2808-16 2808-20 2808-24 fitting reference page .42 .51 .64 .88 1.12 1.38 .58 .68 .82 1.09 1.35 1.62 2750 2500 1750 1500 1125 800 11000 10000 7000 6000 4500 3200 4.62 5.50 6.50 7.38 11.00 14.00 28 28 20 15 15 15 .20 .26 .30 .44 .57 .70 pipe sae 37° cpv brass/steel dogleg flange accessories see page assembly instructions see page 133 134 138 135 136-137 139 140 149-152 169 construction extruded ptfe tube double-stainless steel wire braid reinforcement cover application temperature range and chemical inertness make teflon hose suitable for a variety of applications some are potable water electronic cooling hot lube oil compressor discharge saturated steam 200 psi max for more specific information on fluid compatibility see page 176 preferable to 2807 hose particularly in the larger sizes when severe bending and flexing are encountered approved for u.s navy shipboard applications per sea 53217 9055 ser 312 not recommended for steam-cold water cycling operating temperature range -100°f to +450°f 73°c to +232°c steam 200 psi at +388° f max engineering is available for specific critical temperature requirement contact eaton maximum negative pressures shown for -16 and larger are suitable for hose which has suffered no external damage or kinking if greater negative pressures are required for -16 and larger hoses the use of an internal support coil is required use of an internal support coil in -6 and larger teflon hose is recommended for true support where extended or continuous service at high temperature together with low or negative pressure 22 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 23

hose 5000 psi pneumatic assemblies assembly number hose i.d hose o.d min bendradius inches thread a b l ae1002867h-l 678619-8 l .44 .80 .80 8.00 8.00 13/4-12un-3a 13/4-12un-3a 2.80 2.52 2.11 2.11 ae1000120h l .44 overall assembly length overall assembly length all dimensions in inches 678619 with reusable fittings 1 a 2 3 4 5 l 6 a 5 4 3 2 1 ae1000120 with crimped fittings 1 a length of assembly l 2 3 2 a 1 b hex thread cl-3a 678619 segment socket c.p.v male o-ring b hex thread cl-3a req d per ass y ae1000120 crimped socket c.p.v male o-ring components ae1000120 crimped socket c.p male o-ring .v components 678619 segment socket c.p male o-ring .v description req d per ass y part number size material description part number size material nipple retainer sleeve socket retainer hose 2 2 2 6 2 1 ae11495h ae11499h ae11497h ae11496h ae11498h 678 -8 -8 -8 -8 -8 -8 lengths 304 cres 4140 norm 304 cres 4130 norm 4140 norm teflon nipple socket hose 2 2 1 ae10512h ae10513h 678 -8 -8 -8 304 cres 304 cres teflon applications aeroquip pneumatic teflon hose assemblies are suitable for high pressure service with inert gas systems where operating pressures reach 5500 psi 351.6 kg/cm2 the hose is recommended for air nitrogen and other inert gases and is also suitable for helium and helium mixtures where a relatively high effusion rate can be accepted aeroquip 678 hose is suitable in a temperature range from -65°f to +450°f it is not recommended for pure oxygen lines without specific engineering approval from eaton in each case primary shipboard applications include compressor discharge lines in h.p air systems and charging lines in air and nitrogen systems the hose reinforcement is multiple spiral layers of 300series stainless steel wire certification the 678619 hose assembly is supplied with certification traceability documentation to navships 0948-045-7010 level 1 including heat numbers can be supplied at additional charge when requested teflon is a dupont trademark how to order the aeroquip 678619 and ae1000120 teflon hose assemblies should be ordered as detailed below the complete part number will include the size 8 only and the overall length in inches from sealing surface to sealing surface 678619 8 0143 aeroquip 678619 and ae1000120 hose assemblies are available in continuous lengths up to 40 feet longer lengths can be assembled using c.p union fittings or .v by specifying integral union nipple assemblies fittings the standard reusable or crimped socket fittings are illustrated above with cres components the straight thread male c.p o ring .v style is the standard end configuration however a 37° flare swivel fitting and a walseal male fitting can be supplied on special order example complete part number basic assembly number dash size 1/2 i.d length 14 inches 3 equals 3/8 last digit in 1/8 increments ae1000120h basic assembly number dash size 1/2 i.d length 14 inches 3 equals 3/8 last digit in 1/8 increments 0143 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 23

[close]

p. 24

hose fittings fittings index section pages master index fh competitor part number conversion chart hose fittings adapters accessories assembly instructions and assembly equipment technical data male pipe 3-6 7 8-23 24-141 142-144 145-173 174-205 sae 37° split clamp sae 45° compression type 180° return hose cpv dogleg flange steel universal 2556 2565 2665 2758 2766 2807 2808 150901 2580 4 thru 32 26 26 27-29 27-29 105 72 132 139 88 54-56 114-115 33 33 49-53 54-56 49-53 54-56 54-55 88 70-71 49-53 70-71 84-85 122 76-77 70-71 49-53 72 54-56 72 86 78 72 54-56 105-106 73-74 140 89-99 57-65 108-110 57-65 57-65 57,59,61 65,100-103 73-74 57-65 73-74 116-119 73-74 106-107 26-32 26-32 27-29 27-29 27-29 27-29 28 28 crimp fittings available ­ please contact eaton 68 127 133 69 128 134,138 33 70-71 129 135 49-53 130-131 136-137 100-103 66-67 111-113 66-67 66-67 66-67 100-103 66-67 34-48 34-48 45,47 34-38 2580 80 thru 192 303 302a ae369 ae370 ae371 ae372 ae373 ae374 fc132 fc162 fc163 fc173 fc234 fc363 fc364 35 68 68 69 33 69 83 75 69 33 141 141 104 34-48 87 120-121 79-82 68 fittings available ­ please contact eaton 57-65 141 141 66-67 34-38 24 eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003

[close]

p. 25

hose fittings how to order how to order accurate processing and prompt delivery of your order depends on easy identification of your requirements please order aeroquip parts using correct part numbers as described in this catalog inquiries and orders should be directed to your eaton aeroquip distributor or eaton 14615 lone oak road eden prairie mn 55344-2287 952 937-7190 or 952 937-7262 fax 952 937-7394 www.hydraulics.eaton.com part numbers and dash sizes dash size designates the nominal size in 16ths of an inch this number immediately follows the part number and is separated from it with a dash fittings with fc or fj part numbers will have the size expressed in four numerals the first two numerals indicate the size of the connecting end and the second two numerals indicate the size of the hose end all other fittings are followed by a dash number which is the nominal size of the fitting expressed in 16ths of an inch where two dash numbers are given the first one generally indicates the pipe or port size and the second indicates the tube or hose size the hose dash number should always be the same as the last dash number on the fitting dimensions dimensions given in this catalog for aeroquip products are approximate and should be used for reference only exact dimensional information for a given product is subject to change and varying tolerances contact eaton directly for full current information globally standardized pressure ratings eaton has standardized hose burst and operating pressure ratings in cataloging worldwide this move toward standardization will slightly alter some of the pressures ratings listed for hoses in this catalog as pressures are rounded off this is a paper conversion only this action has no effect on the actual testing and certification of aeroquip hoses to stringent product standards mixing/matching aeroquip fitting tolerances are engineered to match aeroquip hose tolerances the use of aeroquip fittings on hose supplied by other manufacturers and/or the use of aeroquip hose with fittings supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended nor authorized by eaton eaton shall not be subject to and disclaims any obligations or liabilities including but not limited to all conwarning eaton manufactures the terminal ends of our hose fittings to the appropriate requirements established by the sae therefore the performance ratings of these hose fittings meet the sae requirements it is possible to order a hose assembly with a fitting terminal end that has a performance rating lower than the hose rating when ordering hose assemblies please keep the terminal end performance rating in mind since this may affect overall hose assembly performance many hose assembly components hose and fittings are easily assembled in the field however factory assembled swaged crimped and reusable hose assemblies are available for complete information contact eaton sequential incidental and contingent damages arising out of breach of contact or of warranty or arising from tort claims including without limitation negligence and strict liability or other theories of law with respect to any hose assemblies not produced from genuine aeroquip hose fittings hose and aeroquip approved equipment and in conformance with aeroquip process and product instructions for each specific hose assembly failure to follow aeroquip process and product instructions and limitations could lead to premature hose assembly failures resulting in property damage serious injury or death eaton aeroquip marine/military catalog a-mm-mc-0001-e june 2003 25

[close]