Embed or link this publication
Description
Popular Pages
p. 2
1 drilling hss drilling 2 3 4 5 solid carbide drilling indexable insert drilling reaming countersinking 4 hss taps and dies threading 6 7 8 circular thread milling thread turning turning tools turning 9 10 11 12 ecocut profilemaster grooving tools miniature turning tools hss milling cutters milling 13 14 solid carbide milling cutters milling tools with indexable inserts mould and die production rotating tool holders tool holders 15 16 tool holders static driven tools workpiece clamping modular toolholders 17 18 19 vices modular spindle tools article no index[close]
p. 3
reaming and countersinking high speed reaming main and extended application pages dihart monomax® adjustable high-speed reamer with multiple cutting edges for batch production available from Ø 5,6 25,89 mm optimum wear compensation within the tolerance zone without loss of precision of radial run-out regrinding and replacement possible for almost all materials common h7 Ø are available ex stock steel page 6 cwn 10 10-150 cwc 10 60-200 stainless steel cast iron aluminium 50-150 100-250 6-8 20-50 dihart reamax® the quick system with replaceable head and multiple cutting edges for batch production from Ø12,5 40 mm highly economical through quick replacement of cutting edge and optimum stability on almost all materials common h7 Ø are available ex stock steel cwn 10 10-150 cwc 10 60-200 cwk 10 ti 700 30-200 stainless steel cast iron aluminium 50-150 100-250 80-200 20-50 9 300-500 page 9 floating reamer the self-centring floating reamer is able to machine through holes countersunk holes and blind holes in a diameter range from 19 to 148 mm tolerances of it 7 can be obtained inserts for all materials available 100 compatible with the modular wnt swiss-tool system page 14 steel k 10 tialn cermet 30-60 40-120 60-300 stainless aluminicast iron steel um 40-80 65-400 20-80 60-100 40-180 14-16 solid carbide reamers nc high-performance reamer with straight shank diameter for mounting in centro-p or hydraulic expansion chuck tolerance zone h7 according to din 1420 Ø 2 30 mm similar to vhm din 40 420 8093 main and extended application steel 8-20 pages stainless cast alumisteel iron nium 17 8-15 10-20 20-80 nc 100 high performance reamer with straight shank diameter for mounting in centro-p or hydraulic expansion chuck diameter steps 0.01 mm tolerances from d7 to z8 available similar to vhm din 40 430 8093 steel 8-20 stainless cast alumisteel iron nium 18-20 8-15 10-20 20-80 uni hsr high performance reamer with through coolant and straight shank diameter tolerance zone h7 to din 1420 irregular pitch Ø 4 20 mm vhm vhm 40 460 40 465 steel 60-250 stainless cast alumisteel iron nium 21 60-250 uni hsr 100 high-performance reamer with through coolant and straight shank diameter diameter steps 0.01 mm tolerances from d7 to z8 irregular pitch vhm 40 461 steel 60-250 stainless cast alumisteel iron nium 22-24 60-250 va cnc high performance reamer for stainless steel machining with through coolant and straight shank diameter tolerance zone h7 to din 1420 irregular pitch Ø 4-20 mm vhm vhm tialn tialn 40 450 40 455 steel stainless cast hard machisteel iron ning 15-40 6-12 25 va cnc 100 high-performance reamer for stainless steel machining with through coolant and straight shank diameter diameter steps 0.01 mm tolerances from d7 to z8 irregular pitch vhm tialn 40 451 steel stainless cast hard machisteel iron ning 15-40 6-12 26-28 04 2 www.wnt.com[close]
p. 4
reaming and countersinking hss reamers nc high-performance reamer with straight shank diameter for mounting in centro-p or hydraulic expansion chuck tolerance zone h7 according to din 1420 similar to hss-e din 212 40 110 main and extended application steel 10-18 pages stainless aluminicast iron steel um 10-14 16-22 8-10 29 nc 100 high performance reamer with straight shank diameter for mounting in centro-p or hydraulic expansion chucks diameter steps of 0,01 mm tolerances from d7 to z8 available similar to hss-e din 212 40 115 steel 10-18 stainless aluminicast iron steel um 10-14 16-22 8-10 30-31 4 pages solid carbide reamers n high-performance machine reamer with parallel shank tolerance zone h7 according to din 1420 -left hand helix similar to vhm din 40 410 8093 main and extended application steel 8-20 stainless aluminicast iron steel um 10-20 20-80 8-15 33 n high-performance machine reamer with parallel shank tolerance zone h7 according to din 1420 -straight flutes similar to vhm din 40 400 8093 steel 8-20 stainless aluminicast iron steel um 10-20 20-80 8-15 32 hss reamers n high-performance machine reamer with parallel shank tolerance zone h7 according to din 1420 din 212 hss-e 40 150 main and extended application steel 10-18 pages stainless aluminicast iron steel um 10-14 16-22 8-10 34 n 100 high-performance machine reamer with parallel shank diameter steps of 0.01 mm numerous tolerances possible din 212 hss-e 40 140 steel 10-18 stainless aluminicast iron steel um 10-14 16-22 8-10 35-38 ar stub reamer extra-short with parallel shank right-hand cutting tolerance zone h7 according to din 1420 din 8089 hss-e h7 40 145 steel 10-18 stainless aluminicast iron steel um 10-14 16-22 8-10 39 ar 100 stub reamer extra-short with parallel shank right-hand cutting diameter steps of 0.01 mm numerous tolerances possible din 8089 hss-e 1/100 40 139 steel 10-18 stainless aluminicast iron steel um 10-14 16-22 8-10 40 s spiral machine reamer double feed rate and longer tool life tolerance zone h7 suitable only for through holes din hss-e 212 208 40 155 hss-e mk 40 165 steel 10-18 stainless aluminicast iron steel um 10-14 16-22 8-10 41 f machine chucking reamer straight flutes it does not follow the pre-drilled hole but keeps the position and straightness of the hole tolerance zone h7 according to din 1420 din 212 hss-e 40 130 hss-e mk 40 135 steel 10-18 stainless aluminicast iron steel um 10-14 16-22 8-10 42 n machine reamer with morse taper right-hand cutting with lefthand helix tolerance zone h7 according to din 1420 din 208 hss-e mk 40 160 steel 10-18 stainless aluminicast iron steel um 10-14 16-22 8-10 43 h hand reamer with parallel shank right-hand cutting tolerance zone h7 according to din 1420 din 206 hss-e 40 100 43 www.wnt.com 04/3[close]
p. 5
reaming and countersinking indexable insert counterbore wps 2 cutting edges right-hand cutting for countersinking according to din 974-1 with through coolant shank according to din 1835 b for countersinking of hexagon socket screws according to din iso 1207 din en iso 4762 din 912 din 6912 din 7984 din 30 195 1835-b main and extended application staincast alumi heat steel less resistant iron nium alloys steel 80-200 60-120 100-250 100-500 40-90 pages 44 hss counterbores n universal application for countersinking of hexagon socket screws according to din 74 912 6912 7984 and cylinder screws according to din 84 din 373 hss 30 190 main and extended application steel 8-20 pages stainless cast alumisteel iron nium 10-18 15-30 45 hss countersinks n chatter marks avoided when countersinking or deburring on virtually all materials 90° main and extended application hsshssstainless cast alumihss steel tin tialn steel iron nium 30 100 30 110 30 130 hss 10-18 5-10 8-25 30-80 12-32 8-12 10-30 50-90 tin tialn 15-40 10-15 15-40 90° hsstialn 30 132 stainless aluminicast iron steel um 8-20 pages 46 va specially for stainless steels steel 46 al specially for non ferrous metals and plastics deburringcountersink 90° with oblique hole to avoid burrs and chatter marks when countersinking and deburring in soft long-chipping materials e.g aluminium plastics etc 60° chatter marks avoided when countersinking or deburring on virtually all materials countersink chatter marks avoided when countersinking or deburring on virtually all materials 120° 90° hss 30 102 steel stainless aluminicast iron steel um 40-90 46 hss-e 30 120 hss-e tin 30 121 steel 10-28 stainless aluminicast iron steel um 5-10 8-25 30-80 48 countersink hss 30 150 hss mk 30 155 steel 10-28 stainless cast alumisteel iron nium 5-10 8-25 30-80 47-49 hss 30 170 hss mk 30 175 steel 10-28 stainless cast alumisteel iron nium 5-10 8-25 30-80 47-49 solid carbide countersinks n universal solid carbide countersink with 3 cutting edges for steel grey cast iron gg aluminium and stainless steel 90° vhm p30 30 115 main and extended application stainless cast alumisteel iron nium 8-20 25-40 40-80 pages steel 15-30 48 n universal solid carbide countersink with 3 cutting edges for steel grey cast iron gg aluminium and stainless steel 60° vhm p30 30 160 steel 15-30 stainless cast alumisteel iron nium 8-20 25-40 40-80 48 symbol overview uncoated tool a b b/d c d e form 04 4 www.wnt.com[close]
p. 6
reaming and countersinking dihart monomax® Ø 5.6 25.89 mm dowel holes possible to tolerance zone it 5 selection on page 6 4 cylindrical shank is optimally clamped with hydraulic expansion chuck Ø range of 5.6 25.89 mm possible adjustment of the diameter within the tolerance zone permitting maximum wear compensation shank lengths in long and short section 15 spindle tooling products delivered high precision ground no re-setting required internal coolant supply directly to the cutting edge re-grinding and adjustment of tool possible wnt regrinding service replacement and regrinding without coating 15 working days replacement and regrinding with coating 20 working days 100 new tools regrind 2 5 times possible dihart reamax® Ø 12,5 40,0 mm to tolerance zone it 7 absolute process safety can be guaranteed from the first cut selection assistance on page 9 the quick change head system with multiple cutting edges surface for optimum control of radial run-out smooth operation through irregular angular pitch measuring teeth are marked exact repeatability to 2µm through precision ground taper location internal coolant supply directly to the cutting edge well-suited for minimum quantity lubrication section 15 spindle tooling tool holder in 3 x d and 5 x d as standard cylindrical shank is optimally clamped with hydraulic expansion chuck replaceable heads in solid carbide or cermet processsecurity from the first cut only 5 tool holders for Ø range 12.5 40 mm necessary www.wnt.com 04/5[close]
p. 7
reaming and countersinking selection assistance dowel holes possible to tolerance zone it 5 according to checklist on page 13 grade flute type lead angle material article no application cwn 10 cwn 10 cwc 10 cwc 10 40 600 40 601 40 610 40 611 40 620 40 621 40 630 40 631 steel to 850 n/mm2 a steel 850 n/mm2 high alloyed steel hss special alloys r stainless steel grey cast iron f nodular cast iron cwn 10 cwc 10 k10tin coated wear resistant carbide wear resistant cermet uncoated for special applications or materials please use the checklist on page 13 04/6 www.wnt.com[close]
p. 8
reaming and countersinking high performance reamer short with cylindrical shank according to din 1835 standard diameters available ex stock no Ø adjustment necessary wear compensation within the tolerance zone return movement using rapid feed z number of teeth cwn 10 cwn 10 cwc 10 cwc 10 4 l1 f d1 l2 l3 f 0,1 mm d2 d1 h7 mm 5,60 5,99 6,00 6,01 7,99 8,00 8,01 8,89 8,90 9,89 9,90 9,99 10,00 10,01 11,99 12,00 12,01 13,99 14,00 14,01 15,89 15,90 15,99 16,00 16,01 17,99 18,00 18,01 18,89 18,90 19,99 20,00 20,01 25,89 l1 mm 85 85 85 85 85 95 95 95 95 95 95 95 95 100 100 100 100 100 120 120 120 l3 mm 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 l2 mm 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 d2 h6 mm 12 12 12 12 12 12 12 12 12 12 12 12 12 16 16 16 16 16 20 20 20 45° pg u3 article no z 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 £ 438.03 438.03 438.03 438.03 438.03 501.96 501.96 501.96 501.96 501.96 501.96 501.96 501.96 618.87 618.87 618.87 618.87 618.87 751.38 751.38 751.38 40 600 xxxxx 20° pg u3 article no £ 438.03 438.03 438.03 438.03 438.03 501.96 501.96 501.96 501.96 501.96 501.96 501.96 501.96 618.87 618.87 618.87 618.87 618.87 751.38 751.38 751.38 40 610 xxxxx 45° pg u3 article no £ 564.30 564.30 564.30 564.30 564.30 715.53 715.53 715.53 715.53 715.53 715.53 715.53 715.53 766.95 766.95 766.95 766.95 766.95 826.20 826.20 826.20 40 620 xxxxx 20° pg u3 article no £ 564.30 564.30 564.30 564.30 564.30 715.53 715.53 715.53 715.53 715.53 715.53 715.53 715.53 766.95 766.95 766.95 766.95 766.95 826.20 826.20 826.20 40 630 xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxx 060 xxxx 080 xxxx xxxx xxxx 100 xxxx 120 xxxx 140 xxxx xxxx 160 xxxx 180 xxxx xxxx 200 xxxx 40600 40600 40600 40600 40600 40600 40600 40600 2 2 xxxxx 2 2 2 xxxxx xxxxx xxxxx 2 xxxxx 2 xxxxx 2 2 xxxxx xxxxx 2 xxxxx 2 2 xxxxx xxxxx 2 xxxxx xxxx 060 xxxx 080 xxxx xxxx xxxx 100 xxxx 120 xxxx 140 xxxx xxxx 160 xxxx 180 xxxx xxxx 200 xxxx 40610 40610 40610 40610 40610 40610 40610 40610 2 2 xxxxx 2 2 2 xxxxx xxxxx xxxxx 2 xxxxx 2 xxxxx 2 2 xxxxx xxxxx 2 xxxxx 2 2 xxxxx xxxxx 2 xxxxx xxxx 060 xxxx 080 xxxx xxxx xxxx 100 xxxx 120 xxxx 140 xxxx xxxx 160 xxxx 180 xxxx xxxx 200 xxxx 40620 40620 40620 40620 40620 40620 40620 40620 1 1 xxxxx 1 1 1 xxxxx xxxxx xxxxx 1 xxxxx 1 xxxxx 1 1 xxxxx xxxxx 1 xxxxx 1 1 xxxxx xxxxx 1 xxxxx xxxx 060 xxxx 080 xxxx xxxx xxxx 100 xxxx 120 xxxx 140 xxxx xxxx 160 xxxx 180 xxxx xxxx 200 xxxx 40630 40630 40630 40630 40630 40630 40630 40630 1 1 1 1 1 1 1 1 1 1 1 1 1 1 not available ex stock articles are non-returnable and cannot be exchanged delivery time 15 working days 2 not available ex stock articles are non-returnable and cannot be exchanged delivery time 20 working days page 50-51 do not shrink tool for xxxx please indicate requested Ø in h7 in the order e.g Ø 15,89 h7 article no 40 630 1589 all other diameters and tolerance zones are also possiblee.g 18,5 0,025 or 18 n7 for this purpose kindly use our request form on page 13 www.wnt.com 04/7[close]
p. 9
reaming and countersinking high performance reamer long with cylindrical shank according to din 1835 standard diameters available ex stock no Ø adjustment necessary wear compensation within the tolerance zone return movement using rapid feed z number of teeth cwn 10 cwn 10 cwc 10 cwc 10 l1 f d1 l2 l3 f 0,1mm d2 d1 h7 mm 5,60 5,99 6,00 6,01 7,99 8,00 8,01 8,89 8,90 9,89 9,90 9,99 10,00 10,01 11,99 12,00 12,01 13,99 14,00 14,01 15,89 15,90 15,99 16,00 16,01 17,99 18,00 18,01 18,89 18,90 19,99 20,00 20,01 25,89 l1 mm 130 130 130 130 130 130 160 160 160 160 160 160 160 180 180 180 180 180 200 200 200 l3 mm 85 85 85 85 85 85 115 115 115 115 115 115 115 130 130 130 130 130 140 140 140 l2 mm 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 d2 h6 mm 12 12 12 12 12 12 12 12 12 12 12 12 12 16 16 16 16 16 20 20 20 45° pg u3 article no z 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 £ 438.03 438.03 438.03 438.03 438.03 501.96 559.65 559.65 559.65 559.65 559.65 559.65 559.65 618.87 618.87 618.87 618.87 618.87 751.38 751.38 751.38 40 601 xxxxx 20° pg u3 article no £ 438.03 438.03 438.03 438.03 438.03 501.96 559.65 559.65 559.65 559.65 559.65 559.65 559.65 618.87 618.87 618.87 618.87 618.87 751.38 751.38 751.38 40 611 xxxxx 45° pg u3 article no £ 564.30 577.83 564.30 564.30 564.30 715.53 745.14 745.14 745.14 745.14 745.14 745.14 745.14 766.95 766.95 766.95 766.95 766.95 826.20 826.20 826.20 40 621 xxxxx 20° pg u3 article no £ 564.30 564.30 564.30 564.30 564.30 715.53 745.14 745.14 745.14 745.14 745.14 745.14 745.14 766.95 766.95 766.95 766.95 766.95 826.20 826.20 826.20 40 631 xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx xxxx 060 xxxx 080 xxxx xxxx xxxx 100 xxxx 120 xxxx 140 xxxx xxxx 160 xxxx 180 xxxx xxxx 200 xxxx 40601 40601 40601 40601 40601 40601 40601 40601 2 2 xxxxx 2 2 2 xxxxx xxxxx xxxxx 2 xxxxx 2 xxxxx 2 2 xxxxx xxxxx 2 xxxxx 2 2 xxxxx xxxxx 2 xxxxx xxxx 060 xxxx 080 xxxx xxxx xxxx 100 xxxx 120 xxxx 140 xxxx xxxx 160 xxxx 180 xxxx xxxx 200 xxxx 40611 40611 40611 40611 40611 40611 40611 40611 2 2 xxxxx 2 2 2 xxxxx xxxxx xxxxx 2 xxxxx 2 xxxxx 2 2 xxxxx xxxxx 2 xxxxx 2 2 xxxxx xxxxx 2 xxxxx xxxx 060 xxxx 080 xxxx xxxx xxxx 100 xxxx 120 xxxx 140 xxxx xxxx 160 xxxx 180 xxxx xxxx 200 xxxx 40621 40621 40621 40621 40621 40621 40621 40621 1 1 xxxxx 1 1 1 xxxxx xxxxx xxxxx 1 xxxxx 1 xxxxx 1 1 xxxxx xxxxx 1 xxxxx 1 1 xxxxx xxxxx 1 xxxxx xxxx 060 xxxx 080 xxxx xxxx xxxx 100 xxxx 120 xxxx 140 xxxx xxxx 160 xxxx 180 xxxx xxxx 200 xxxx 40631 40631 40631 40631 40631 40631 40631 40631 1 1 1 1 1 1 1 1 1 1 1 1 1 1 not available ex stock articles are non-returnable and cannot be exchanged delivery time 15 working days 2 not available ex stock articles are non-returnable and cannot be exchanged delivery time 20 working days page 50-51 do not shrink tool for xxxx please indicate requested Ø in h7 in the order e.g Ø 15,89 h7 article no 40 631 1589 all other diameters and tolerance zones are also possiblee.g 18,5 0,025 or 18 n7 for this purpose kindly use our request form on page 13 04/8 www.wnt.com[close]
p. 10
reaming and countersinking selection assistance to tolerance zone it 7 absolute process safety can be guaranteed right from the first cut grade ti 700 cwn 10 cwn 10 cwc 10 cwc 10 cwk 10 4 flute type straight straight straight straight straight straight lead angle article no application material 40 550 40 500 40 511 40 520 40 531 40 540 steel to 900 n/mm2 a steel 900 n/mm2 r stainless steel grey cast iron f nodular cast iron n copper brass bronze aluminum x x for special applications or materials please use the checklist on page 13 ti 700 cwn 10 cwc 10 cwk 10 wear resistant carbide grade k10 tialn coated wear resistant carbide grade k10 tin coated wear resistant cermet uncoated wear resistant carbide grade k10 uncoated x main application extended range of application special material range of application www.wnt.com 04/9[close]
p. 11
reaming and countersinking replaceable heads up to tolerance zone it 7 absolute process safety can be guaranteed right from the first cut standard diameters available ex stock minimum delivery times for special diameters xxxxx maximum precision of radial run-out thanks to precision ground taper location precise repeatability 2 µm no Ø adjustment necessary optimised for the application with minimum quantity lubrication return movement using rapid feed z number of teeth klg taper size ti 700 cwn 10 cwn 10 cwc 10 cwc 10 cwk 10 l2 klg d1 d1 h7 mm 12,500 13,999 14,000 14,001 14,999 15,000 15,001 15,999 16,000 16,001 17,999 18,000 18,001 19,999 20,000 20,001 21,999 22,000 22,001 23,999 24,000 24,001 24,999 25,000 25,001 25,999 26,000 26,001 27,999 28,000 28,001 29,999 30,000 30,001 32,000 32,001 34,999 35,000 35,001 39,999 40,000 l2 mm 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 45° pg u3 article no z 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 klg 1 1 1 1 1 2 2 2 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 £ 333.09 333.09 333.09 333.09 333.09 372.24 372.24 372.24 372.24 372.24 372.24 405.42 405.42 405.42 405.42 405.42 405.42 449.10 449.10 449.10 449.10 449.10 449.10 515.43 515.43 515.43 515.43 40 550 xxxxx 45° pg u3 article no £ 307.44 307.44 307.44 307.44 307.44 351.15 351.15 351.15 351.15 351.15 351.15 379.77 379.77 379.77 379.77 379.77 379.77 434.07 434.07 434.07 434.07 434.07 434.07 491.31 491.31 491.31 491.31 40 500 xxxxx 20° pg u3 article no £ 307.44 307.44 307.44 307.44 307.44 351.15 351.15 351.15 351.15 351.15 351.15 379.77 379.77 379.77 379.77 379.77 379.77 434.07 434.07 434.07 434.07 434.07 434.07 491.31 491.31 491.31 491.31 40 511 xxxxx 45° pg u3 article no £ 370.74 370.74 370.74 370.74 370.74 417.48 417.48 417.48 417.48 417.48 417.48 452.13 452.13 452.13 452.13 452.13 452.13 503.37 503.37 503.37 503.37 503.37 503.37 569.70 569.70 569.70 569.70 40 520 xxxxx 20° pg u3 article no £ 370.74 370.74 370.74 370.74 370.74 417.48 417.48 417.48 417.48 417.48 417.48 452.13 452.13 452.13 452.13 452.13 452.13 503.37 503.37 503.37 503.37 503.37 503.37 569.70 569.70 569.70 569.70 40 531 xxxxx 45° pg u3 article no £ 251.70 251.70 251.70 251.70 251.70 286.35 286.35 286.35 286.35 286.35 286.35 307.44 307.44 307.44 307.44 307.44 307.44 342.09 342.09 342.09 342.09 342.09 342.09 388.83 388.83 388.83 388.83 40 540 xxxxx xxxxx xxxxx xxxxx 2 140 xxxxx 2 150 xxxxx 2 40550 40550 xxxxx xxxxx xxxxx 2 140 xxxxx 2 150 xxxxx 2 40500 40500 xxxxx xxxxx xxxxx 2 140 xxxxx 2 150 xxxxx 2 40511 40511 xxxxx xxxxx xxxxx 1 140 xxxxx 1 150 xxxxx 1 40520 40520 xxxxx xxxxx xxxxx 1 140 xxxxx 1 150 xxxxx 1 40531 40531 xxxxx xxxxx xxxxx 1 140 xxxxx 1 150 xxxxx 1 40540 40540 xxxxx xxxxx xxxxx 160 xxxxx 2 180 xxxxx 2 200 xxxxx 2 40550 40550 40550 xxxxx xxxxx xxxxx 160 xxxxx 2 180 xxxxx 2 200 xxxxx 2 40500 40500 40500 xxxxx xxxxx xxxxx 160 xxxxx 2 180 xxxxx 2 200 xxxxx 2 40511 40511 40511 xxxxx xxxxx xxxxx 160 xxxxx 1 180 xxxxx 1 200 xxxxx 1 40520 40520 40520 xxxxx xxxxx xxxxx 160 xxxxx 1 180 xxxxx 1 200 xxxxx 1 40531 40531 40531 xxxxx xxxxx xxxxx 160 xxxxx 1 180 xxxxx 1 200 xxxxx 1 40540 40540 40540 xxxxx xxxxx xxxxx 220 xxxxx 2 240 xxxxx 2 250 xxxxx 2 40550 40550 40550 xxxxx xxxxx xxxxx 220 xxxxx 2 240 xxxxx 2 250 xxxxx 2 40500 40500 40500 xxxxx xxxxx xxxxx 220 xxxxx 2 240 xxxxx 2 250 xxxxx 2 40511 40511 40511 xxxxx xxxxx xxxxx 220 xxxxx 1 240 xxxxx 1 250 xxxxx 1 40520 40520 40520 xxxxx xxxxx xxxxx 220 xxxxx 1 240 xxxxx 1 250 xxxxx 1 40531 40531 40531 xxxxx xxxxx xxxxx 220 xxxxx 1 240 xxxxx 1 250 xxxxx 1 40540 40540 40540 xxxxx xxxxx xxxxx 260 xxxxx 2 280 xxxxx 2 300 xxxxx 2 40550 40550 40550 xxxxx xxxxx xxxxx 260 xxxxx 2 280 xxxxx 2 300 xxxxx 2 40500 40500 40500 xxxxx xxxxx xxxxx 260 xxxxx 2 280 xxxxx 2 300 xxxxx 2 40511 40511 40511 xxxxx xxxxx xxxxx 260 xxxxx 1 280 xxxxx 1 300 xxxxx 1 40520 40520 40520 xxxxx xxxxx xxxxx 260 xxxxx 1 280 xxxxx 1 300 xxxxx 1 40531 40531 40531 xxxxx xxxxx xxxxx 260 xxxxx 1 280 xxxxx 1 300 xxxxx 1 40540 40540 40540 xxxxx xxxxx xxxxx 2 350 xxxxx 2 400 40550 40550 xxxxx xxxxx xxxxx 2 350 xxxxx 2 400 40500 40500 xxxxx xxxxx xxxxx 2 350 xxxxx 2 400 40511 40511 xxxxx xxxxx xxxxx 1 350 xxxxx 1 400 40520 40520 xxxxx xxxxx xxxxx 1 350 xxxxx 1 400 40531 40531 xxxxx xxxxx xxxxx 1 350 xxxxx 1 400 40540 40540 1 not available ex stock articles are non-returnable and cannot be exchanged delivery time 15 working days 2 not available ex stock articles are non-returnable and cannot be exchanged delivery time 18 working days page 52-53 for xxxxx please indicate requested Ø in h7 in the order e.g 15,89 h7 article no 40 540 1589 all other diameters and tolerance zones are also possiblee.g 18,5 0,025 or 18 n7 for this purpose kindly use our request form on page 13 04/10 www.wnt.com[close]
p. 12
reaming and countersinking holder short supply details tool holder fitted with clamp and hexagonal key but without replaceable head klg taper size m torque moment l1 l5 Ød1 4 d2 l2 l3 3xd Ø range d1 mm 12,500-15,999 16,000-21,999 22,000-25,999 26,000-32,000 32,001-40,000 klg 1 2 3 4 5 l1 mm 107 119 140 160 199 l2 mm 9 9 9 9 9 l5 mm 59 69 84 104 139 d2 h6 mm 16 20 25 25 32 m nm 4-5 6-7 10-12 18-20 26-28 pg u3 article no £ 518.37 540.18 576.57 610.86 680.22 40 590 40590 40590 40590 40590 40590 016 022 026 032 040 do not shrink tool pg u3 pg u3 pg u3 draw bolt article no spare parts Ø range d1 12,500-15,999 16,000-21,999 22,000-25,999 26,000-32,000 32,001-40,000 d2 h6 16 20 25 25 32 £ 70.29 70.29 81.96 93.69 105.72 draw bar article no circlip article no £ 0.96 0.96 0.96 0.96 1.17 40 950 40950 40950 40950 40950 40950 101 102 103 104 106 £ 175.98 175.98 187.68 199.38 211.11 40 950 40950 40950 40 950 40950 40950 40950 40950 40950 001 002 003 004 005 40950 40950 40950 201 202 203 203 204 1 2 3 draw bolt draw bar circlip www.wnt.com 04/11[close]
p. 13
reaming and countersinking holder long supply details tool holder fitted with clamp and hexagonal key but without replaceable head klg taper size m torque moment l1 l5 Ød1 l2 l3 5xd d2 Ø range d1 mm 12,500-15,999 16,000-21,999 22,000-25,999 26,000-32,000 32,001 -40,000 klg 1 2 3 4 5 l1 mm 137 169 196 226 270 l2 mm 9 9 9 9 9 l5 mm 89 119 140 170 210 d2 mm 16 20 25 25 32 m nm 4-5 6-7 10-12 18-20 26-28 pg u3 article no £ 530.76 540.18 576.57 610.86 696.54 40 591 40591 40591 40591 40591 40591 016 022 026 032 040 do not shrink tool pg u3 pg u3 pg u3 draw bolt article no spare parts Ø range d1 d2 12,500-15,999 16 16,000-21,999 20 22,000-25,999 25 26,000-32,000 25 32,001 -40,000 32 £ 70.29 70.29 81.96 93.69 105.72 draw bar article no circlip article no £ 0.96 0.96 0.96 0.96 1.17 40 950 40950 40950 40950 40950 40950 107 108 109 110 112 £ 175.98 175.98 187.68 199.38 211.11 40 950 40950 40950 40 950 40950 40950 40950 40950 40950 001 002 003 004 005 40950 40950 40950 201 202 203 203 204 1 2 3 draw bolt draw bar circlip 04/12 www.wnt.com[close]
p. 14
reaming and countersinking checklist for machining suggestions and deviations to tolerance zone h7 1 hole nominal diameter e.g 18,5 mm tolerance e.g f7 mm or upper limit e.g +0,025 lower limit e.g +0,005 diameter before machining only indicate deviations machining horizontal stationary type of hole please tick vertical rotating hole depth internal coolant 4 yes no 2 material standard designation mechanical properties heat treatment n/mm2 3 4 preferred type dihart reamax® to tolerance zone it 7 dihart monomax® to tolerance zone it 5 special information on machining if required accuracy of the hole surface quality ra/rt/rz e.g length of the interrupted cut x mm minimum quantity lubrication yes no special tool adapter e.g morse taper monobloc hsk tool machine e.g lathe machine adapter e.g vdi 30 tool adapter e.g compensation adapter Ø 25 5 required quantity company address dept contact street post code town customer no if available your reference www.wnt.com 04/13[close]
p. 15
reaming and countersinking the wnt floating reamer coolant supply directly onto the cutting edge up to 40 bar Ø-range 19,0 mm 148,0 mm maximum cutting speeds for fixed and rotating applications compensation of misalignments with rotating tools up to 0.025 mm and with stationary tools up to 0.05 mm flexibility thanks to modular wnt swisstools-connection simple adjustment with micro-precision of the floating reamer using a setting gauge indexable insert with patented cutting edge geometry and alignment guide minimum unbalance for rotating applications thanks to limited mass in case of optimum conditions the following cutting data and quality can be achieved in steel 300 m/min cermet in grey cast iron:140 m/min coated carbide in alu surface roughness 400 m/min solid carbide blank up to rz 2 tolerance it 7 roundness 3 µm the wnt floating reamer can also be applied when machining holes with interrupted cuts symmetrical to the axis if the length of the interruption does not exceed 3,5 mm the tool should be withdrawn when half the insert length protrudes from the exit of a through hole compatible with all wnt swiss-tool connections din 1835 art no 62 104 art no 62 351 hsk art no 62 122 art no 62 357 art no 40 700 sk art no 62 107/108 art no 62 357 mas bt art no 62 112 for suitable tool holders see chapter 18 precision boring heads 04/14 www.wnt.com[close]
p. 16
reaming and countersinking floating reamer adjustable Ø-range with internal coolant supply inserts are not included in the delivery swiss tools modular interface d3 d2 a d3 4 b d2 a l3 d1 d1 a Ø range d1 mm 19-21 21-23 23-25 25-28 28-32 32-36 36-42 42-48 48-56 56-64 64-74 74-84 84-98 98-112 112-130 130-148 d3 mm 25 25 25 25 25 25 25 32 32 40 50 63 63 63 63 63 d2 mm 14 14 14 14 14 14 14 18 18 22 28 36 36 36 36 36 a mm 88 96 104 111 65 70 70 75 80 85 90 95 105 110 125 125 l3 mm 77.0 85.0 93.0 100.5 pg u3 article no fig aaaabbbbbbbbbbbb insert xcgx xcgx xcgx xcgt xcgt xcgt xcgt xcgt xcgt xcgt xcgt xcgt xcgt xcgt xcgt xcgt £ 1,595.01 1,595.01 1,595.01 1,595.01 40 700 40700 pg u3 article no £ 40 700 40700 40700 40700 019 021 023 025 1,595.01 1,595.01 1,595.01 1,659.03 1,659.03 1,816.20 1,986.96 2,270.28 2,563.26 2,838.81 3,127.92 3,395.70 40700 40700 40700 40700 40700 40700 40700 40700 40700 40700 40700 40700 028 032 036 042 048 056 064 074 084 098 112 130 pg w7 pg w7 pg w7 pg 2a torx key article no spare parts d2 14 18 22 28 36 t6 t6 t6 t6 t6 £ 4.22 4.22 4.22 4.22 4.22 screw for drivers article no m2,5x6 m3x8 m4x10 m5x10 m6x12 £ 0.80 1.00 1.00 1.20 1.20 driver article no 6x10,3x4 8x15x5 10x18,1x6 12x20x6 16x26,5x8 £ 20.79 21.84 24.62 29.51 37.49 clamping screw article no m2 x 4 t06 m2 x 4 t06 m2 x 4 t06 m2 x 4 t06 m2 x 4 t06 £ 1.82 1.82 1.82 1.82 1.82 62 950 62950 62950 62 950 62950 62950 62 950 62950 62950 70 950 70950 70950 62950 62950 62950 041 041 041 041 041 62950 62950 62950 163 164 165 166 167 62950 62950 62950 036 037 038 039 040 70950 70950 70950 274 274 274 274 274 www.wnt.com 04/15[close]
p. 17
reaming and countersinking inserts for floating reamer with patented cutting edge geometry with alignment guide cermet tialn k10 Ø range d1 insert mm 19-25 xcgx 08021010 25-148 xcgt 08021010 steel stainless steel cast iron non ferrous metals heat resistant alloys hardened materials pg x2 article no 40 705 40705 pg x2 article no £ 54.51 030 60.81 130 40705 40 705 40705 pg x2 article no £ 48.96 020 53.46 120 40705 40 705 40705 £ 46.80 010 50.40 110 40705 60-300 60-120 40-120 20-80 40-180 30-60 40-80 65-400 page 54-55 the cutting speed has to be reduced depending on the overhang length 3 x d vc x 1 5 x d vc x 0,8 8 x d vc x 0,5 setting gauge for floating reamer including gauge the floating reamer is adjusted on the setting gauge by setting the gauge to the nominal dimension with the use of a plug gauge subsequently the reamer is placed between the setting rails of the gauge and turned to the position with the highest reading the reaming insert is then unclamped the diameter of the reaming insert is brought to the nominal dimension and the reaming insert is clamped again after this simple setting procedure the floating reamer is ready for application the cutting geometry and the clearance do not need readjustment pg u3 article no Ø range d1 mm 19 150 £ 1,889.94 999 40700 40 700 04/16 www.wnt.com[close]
p. 18
reaming and countersinking solid carbide nc machine reamers similar to din 8093 Ø 30 with cylindrical shank right-hand cutting irregular pitch with straight shank diameters for mounting in centro-p or hydraulic expansion chucks tolerance zone h7 according to din 1420 maximum precision of radial run-out increased economy up to nominal Ø 13 mm made of solid carbide k10 Ø 14 20 mm with solid carbide head Ø 22 and greater with carbide cutting edges z number of teeth d2 4 l3 d1 l2 l1 d1 h7 mm 2.0 2.5 3.0 3.2 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 22.0 24.0 25.0 26.0 28.0 30.0 l1 mm 49 59 63 65 70 75 80 86 93 93 101 109 109 117 117 125 125 133 133 142 151 151 160 162 170 175 182 189 195 160 180 180 180 180 200 l2 mm 12 16 17 18 18 19 21 23 26 26 28 31 31 33 33 36 36 38 38 41 44 44 47 50 52 54 56 58 60 25 25 25 25 25 25 l3 mm 21 31 35 37 42 47 44 50 57 57 65 73 73 81 77 85 85 93 88 97 106 103 112 114 122 127 134 141 147 112 130 130 130 124 144 d2 h6 mm 4 4 4 4 4 4 6 6 6 6 6 8 8 8 8 10 10 10 10 12 12 12 16 16 16 18 18 20 20 20 20 20 20 25 25 right pg u4 article no z 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 6 8 8 8 8 8 40 420 £ 45.00 45.00 46.86 46.86 46.86 56.10 56.10 62.88 62.88 67.80 67.80 75.18 75.18 87.54 87.54 95.55 95.55 102.33 102.33 131.91 131.91 129.48 129.48 138.12 141.75 145.47 146.70 152.85 154.11 154.11 187.41 187.41 210.84 220.68 228.09 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 40420 020 025 030 032 035 040 045 050 055 060 065 070 075 080 085 090 095 100 105 110 120 130 140 150 160 170 180 190 200 220 240 250 260 280 300 steel stainless steel cast iron non ferrous metals heat resistant alloys hardened materials vc m/min for main and extended application 8-20 8-15 10-20 7-80 5-20 page 60 www.wnt.com 04/17[close]
p. 19
reaming and countersinking 1/100 solid carbide nc machine reamers similar to din 8093 with cylindrical shank right-hand cutting irregular pitch with straight shank diameters for mounting in centro-p or hydraulic expansion chucks diameter steps of 0,01 mm diameters from Ø 0,985.50 mm +0.004 -0,000 mm from Ø 5,51-12,00 mm +0,005 -0,000 mm z number of teeth d2 l3 d1 l2 l1 d1 mm 0,98 0,99 1,00 1,01 1,02 1,03 1,04 1,42 1,43 1,53 1,54 1,60 1,61 1,90 1,91 1,97 1,98 1,99 2,00 2,01 2,02 2,03 2,04 2,36 2,37 2,47 2,48 2,49 2,50 2,51 2,52 2,53 2,54 2,65 2,66 2,89 2,90 2,96 2,97 2,98 2,99 3,00 3,01 3,02 3,03 3,04 3,10 3,11 3,35 3,36 3,75 3,76 3,96 l1 mm 49.5 49.5 49.5 49.5 49.5 49.5 49.5 49.0 49.0 49.0 49.0 49.0 49.0 49.0 49.0 49.0 49.0 49.0 59.0 59.0 59.0 59.0 59.0 59.0 59.0 59.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 65.0 65.0 70.0 75.0 l2 mm 6 6 6 6 6 9 9 9 10 11 12 12 12 12 12 12 12 12 16 16 16 16 16 16 16 16 17 17 17 17 17 17 17 17 17 16 16 18 19 l3 mm 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 31.0 31.0 31.0 31.0 31.0 31.0 31.0 31.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 37.0 37.0 42.0 47.0 d2 h6 mm 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 right pg u4 article no z 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 tolerances e.g Ø 2 f7 2,01 mm 1 1 1 1 1 1 1 1 1 1 1 40 430 £ 62.34 62.34 62.34 62.34 62.34 62.34 71.70 71.70 81.03 81.03 81.03 81.03 81.03 81.03 81.03 81.03 81.03 62.34 62.34 62.34 62.34 62.34 62.34 62.34 62.34 62.34 62.34 62.34 53.64 53.64 53.64 46.86 53.64 53.64 53.64 71.70 71.70 71.70 71.70 40430 40430 40430 40430 40430 40430 xxxxx xxxxx xxxxx xxxxx xxxxx 40430 40430 40430 40430 40430 40430 xxxxx xxxxx 40430 40430 40430 40430 40430 40430 xxxxx xxxxx xxxxx 40430 40430 40430 40430 40430 40430 40430 xxxxx xxxxx xxxxx xxxxx 00980 00990 01000 01010 01020 01030 xxxxx xxxxx xxxxx xxxxx xxxxx 01980 01990 02000 02010 02020 02030 xxxxx xxxxx 02480 02490 02500 02510 02520 02530 xxxxx xxxxx xxxxx 02970 02980 02990 03000 03010 03020 03030 xxxxx xxxxx xxxxx xxxxx 8-20 8-15 10-20 7-80 5-20 Ø1 1,00 1,01 1,02 js 8 f7 e8 js 9 f8 f9 h9 Ø2 1 1 1,98 1,99 2,00 2,01 2,02 2,03 n9 k8 js 8 f7 e8 d9 n 10 n7 js 9 f8 f9 e9 n 11 n9 h9 h 10 s7 1 1 1 Ø3 1 1 1 1 2,97 2,98 2,99 3,00 3,01 3,02 3,03 x8 n9 k8 js 8 f7 e8 d9 x9 n 10 n7 js 9 f8 f9 e9 z7 n 11 n8 h9 h 10 z8 s7 tolerance classes written in standard print are not optimally positioned in the tolerance field this tool concept permits numerous tolerances for xxxxx please indicate requested Ø in the order e.g Ø 3,82 mm article no 40 430 03820 steel stainless steel cast iron non ferrous metals heat resistant alloys hardened materials vc m/min for main and extended application page 60 1 not available ex stock articles are non-returnable and cannot be exchanged 04/18 www.wnt.com[close]
p. 20
reaming and countersinking 1/100 solid carbide nc machine reamers similar to din 8093 with cylindrical shank right-hand cutting irregular pitch with straight shank diameters for mounting in centro-p or hydraulic expansion chucks diameter steps of 0,01 mm diameters from Ø 0,985.50 mm +0.004 -0,000 mm from Ø 5,51-12,00 mm +0,005 -0,000 mm z number of teeth d2 4 l3 d1 l2 l1 d1 mm 3,97 3,98 3,99 4,00 4,01 4,02 4,03 4,04 4,25 4,26 4,75 4,76 4,96 4,97 4,98 4,99 5,00 5,01 5,02 5,03 5,04 5,30 5,31 5,70 5,71 5,96 5,97 5,98 5,99 6,00 6,01 6,02 6,03 6,04 6,11 6,12 6,70 6,71 7,70 7,71 7,96 7,97 7,98 7,99 8,00 8,01 8,02 8,03 8,04 l1 mm 75 75 75 75 75 75 75 75 80 86 86 86 86 86 86 86 86 86 93 93 93 93 93 93 93 93 93 93 101 109 117 117 117 117 117 117 117 117 117 l2 mm 19 19 19 19 19 19 19 19 21 23 23 23 23 23 23 23 23 23 26 26 26 26 26 26 26 26 26 26 28 31 33 33 33 33 33 33 33 33 33 l3 mm 47 47 47 47 47 47 47 47 44 50 50 50 50 50 50 50 50 50 57 57 57 57 57 57 57 57 57 57 65 73 81 81 81 81 81 81 81 81 81 d2 h6 mm 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 right pg u4 article no z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 tolerances e.g Ø 8 f7 8,02 mm 3,97 3,98 3,99 4,00 4,01 4,02 4,03 u7 n 10 m8 j7 g7 f8 e8 x7 n 11 n7 j8 h8 h9 f9 r7 n8 js 7 h 10 40 430 £ 62.88 62.88 62.88 56.10 62.88 62.88 62.88 77.94 77.94 77.94 69.03 69.03 69.03 62.88 69.03 69.03 69.03 84.15 84.15 84.15 75.18 75.18 75.18 67.80 75.18 75.18 75.18 102.87 102.87 102.87 102.87 93.69 93.69 93.69 87.54 93.69 93.69 93.69 93.69 40430 40430 40430 40430 40430 40430 40430 xxxxx xxxxx xxxxx 40430 40430 40430 40430 40430 40430 40430 xxxxx xxxxx xxxxx 40430 40430 40430 40430 40430 40430 40430 xxxxx xxxxx xxxxx xxxxx 40430 40430 40430 40430 40430 40430 40430 40430 03970 03980 03990 04000 04010 04020 04030 xxxxx xxxxx xxxxx 04970 04980 04990 05000 05010 05020 05030 xxxxx xxxxx xxxxx 05970 05980 05990 06000 06010 06020 06030 xxxxx xxxxx xxxxx xxxxx 07970 07980 07990 08000 08010 08020 08030 08040 8-20 8-15 10-20 7-80 5-20 n9 js 8 js 9 1 1 1 Ø4 1 1 1 Ø5 4,97 4,98 4,99 5,00 5,01 5,02 5,03 u7 n 10 m8 j7 g7 f8 e8 x7 n 11 n7 j8 h8 h9 f9 r7 n8 js 7 h 10 n9 js 8 js 9 Ø6 1 1 1 1 5,97 5,98 5,99 6,00 6,01 6,02 6,03 u7 n 10 m8 j7 g7 f8 e8 x7 n 11 n7 j8 h8 h9 f9 r7 n8 js 7 h 10 n9 js 8 js 9 Ø8 7,97 7,98 7,99 8,00 8,01 8,02 8,03 8,04 s7 n8 k8 j7 g7 f7 e7 h 10 u7 n 10 m6 j8 h8 f8 e8 n 11 m7 js 7 h9 f9 p7 m8 js 8 r7 n9 js 9 steel stainless steel cast iron non ferrous metals heat resistant alloys hardened materials vc m/min for main and extended application tolerance classes written in standard print are not optimally positioned in the tolerance field this tool concept permits numerous tolerances for xxxxx please indicate requested Ø in the order e.g Ø 8,02 mm article no 40 430 08020 page 60 1 not available ex stock articles are non-returnable and cannot be exchanged www.wnt.com continues on next page 04/19[close]
p. 21
reaming and countersinking 1/100 solid carbide nc machine reamers similar to din 8093 with cylindrical shank right-hand cutting irregular pitch with straight shank diameters for mounting in centro-p or hydraulic expansion chucks diameter steps of 0,01 mm diameters from Ø 0,985.50 mm +0.004 -0,000 mm from Ø 5,51-12,00 mm +0,005 -0,000 mm z number of teeth d2 l3 d1 l2 l1 d1 mm 8,05 8,20 8,21 8,70 8,71 9,20 9,21 9,70 9,71 9,96 9,97 9,98 9,99 10,00 10,01 10,02 10,03 10,04 10,05 10,06 10,20 10,21 10,70 10,71 11,70 11,71 11,96 11,97 11,98 11,99 12,00 12,01 12,02 12,03 12,04 12,05 l1 mm 117 117 125 133 133 133 133 133 133 133 133 133 133 133 133 133 142 151 151 151 151 151 151 151 151 151 151 l2 mm 33 33 36 38 38 38 38 38 38 38 38 38 38 38 38 38 41 44 44 44 44 44 44 44 44 44 44 l3 mm 81 81 85 93 93 93 93 93 93 93 93 93 93 93 93 93 97 106 106 106 106 106 106 106 106 106 106 d2 h6 mm 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 right pg u4 article no z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 tolerances e.g Ø 10 f7 10,02 mm 1 1 1 1 1 40 430 £ 115.32 115.32 115.32 115.32 115.32 109.74 109.74 109.74 102.33 109.74 109.74 109.74 109.74 109.74 137.16 137.16 137.16 137.16 131.91 131.91 131.91 124.56 131.91 131.91 131.91 131.91 131.91 xxxxx xxxxx xxxxx xxxxx xxxxx 40430 40430 40430 40430 40430 40430 40430 40430 40430 xxxxx xxxxx xxxxx xxxxx 40430 40430 40430 40430 40430 40430 40430 40430 40430 xxxxx xxxxx xxxxx xxxxx xxxxx 09970 09980 09990 10000 10010 10020 10030 10040 10050 xxxxx xxxxx xxxxx xxxxx 11970 11980 11990 12000 12010 12020 12030 12040 12050 8-20 8-15 10-20 7-80 5-20 1 1 1 1 Ø 10 9,97 9,98 9,99 10,00 10,01 10,02 10,03 10,04 10,05 s7 n8 k8 j7 g7 f7 e7 h 10 d8 u7 n 10 m6 j8 h8 f8 e8 e9 n 11 m7 js 7 h9 f9 f 10 p7 m8 js 8 r7 n9 js 9 Ø 12 11,97 11,98 11,99 12,00 12,01 12,02 12,03 12,04 12,05 n 11 n8 k8 j7 g6 f7 f8 e7 h 10 s7 r7 n9 n 10 p7 m6 m7 m8 n7 j8 js 7 js 8 h7 js 9 h8 this tool concept permits numerous h9 tolerances f9 e8 steel stainless steel cast iron non ferrous metals heat resistant alloys hardened materials vc m/min for main and extended application tolerance classes written in standard print are not optimally positioned in the tolerance field this tool concept permits numerous tolerances for xxxxx please indicate requested Ø in the order e.g Ø 10,82 mm article no 40 430 10820 page 60 1 not available ex stock articles are non-returnable and cannot be exchanged 04/20 www.wnt.com[close]
p. 22
reaming and countersinking solid carbide uni-hsr machine reamer with internal cooling high speed reamer for universal application standard shank for clamping on centro-p or hydraulic expansion chuck tolerance field h7 according to din 1420 highly irregular pitch through hole version with left-hand helix with coolant exit in chip flute blind hole version with central internal cooling z number of teeth tialn tialn d2 d2 4 l1 l3 l2 d1 d1 blind hole through hole blind hole straight pg u4 article no z 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 through hole right pg u4 article no l2 l3 l1 d1 h7 mm 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 l1 mm 75 75 75 75 75 100 100 100 100 100 100 120 120 120 120 120 120 130 130 130 150 150 150 150 150 l2 mm 12 12 12 12 12 16 16 16 16 20 20 20 20 20 20 20 20 22 22 22 25 25 25 25 25 l3 mm 39 39 39 39 39 64 64 64 64 60 60 80 80 75 75 75 75 85 85 82 102 102 102 100 100 d2 h6 mm 6 6 6 6 6 8 8 8 8 10 10 10 10 12 12 12 12 14 14 16 16 18 18 20 20 40 465 £ 144.48 162.24 148.92 166.68 153.36 160.02 166.68 175.59 162.24 200.04 188.91 200.04 233.37 302.25 302.25 302.25 311.16 333.39 344.52 344.52 355.59 355.59 411.18 411.18 440.07 40465 40 460 £ 144.48 162.24 148.92 166.68 153.36 160.02 166.68 175.59 162.24 200.04 188.91 200.04 233.37 302.25 302.25 302.25 311.16 333.39 344.52 344.52 355.59 355.59 411.18 411.18 440.07 40460 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 40465 040 045 050 055 060 065 070 075 080 085 090 095 100 105 110 115 120 130 140 150 160 170 180 190 200 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 40460 040 045 050 055 060 065 070 075 080 085 090 095 100 105 110 115 120 130 140 150 160 170 180 190 200 steel stainless steel cast iron non ferrous metals heat resistant alloys hardened materials vc m/min for main and extended application 1 not available ex stock articles are non-returnable and cannot be exchanged delivery time 14 working days 60-250 60-250 60-250 60-250 page 56 www.wnt.com 04/21[close]
p. 23
reaming and countersinking solid carbide uni-hsr 1/100 machine reamer with internal cooling high speed reamer for universal application standard shank for clamping on centro-p or hydraulic expansion chuck Ø 3,70 5,50 0,004 Ø 5,51 20,20 0,005 highly irregular pitch through hole version with left-hand helix with coolant exit in chip flute z number of teeth tialn d2 d1 l2 l3 l1 d1 mm 3,70 3,96 3,97 3,98 3,99 4,00 4,01 4,02 4,03 4,04 4,49 4,50 4,51 4,96 4,97 4,98 4,99 5,00 5,01 5,02 5,03 5,04 5,49 5,50 5,51 5,96 5,97 5,98 5,99 6,00 6,01 6,02 6,03 6,04 6,20 6,21 6,49 6,50 6,51 6,99 7,00 7,01 7,49 7,50 7,51 7,96 l1 mm 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 100 100 100 100 100 100 100 l2 mm 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 16 16 16 16 16 16 16 l3 mm 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 64 64 64 64 64 64 64 d2 h6 mm 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 through hole right pg u4 article no z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 tolerances e.g Ø 5 h8 5,01 mm 1 40 461 £ 155.58 155.58 155.58 155.58 144.48 155.58 155.58 155.58 162.24 162.24 162.24 162.24 162.24 162.24 148.92 162.24 162.24 162.24 166.68 166.68 166.68 166.68 166.68 166.68 153.36 166.68 166.68 166.68 160.02 160.02 160.02 166.68 166.68 175.59 175.59 175.59 xxxxx 40461 40461 40461 40461 40461 40461 40461 xxxxx 40461 xxxxx 40461 40461 40461 40461 40461 40461 40461 xxxxx 40461 xxxxx 40461 40461 40461 40461 40461 40461 40461 xxxxx xxxxx 40461 xxxxx 40461 xxxxx 40461 xxxxx xxxxx 03970 03980 03990 04000 04010 04020 04030 xxxxx 04500 xxxxx 04970 04980 04990 05000 05010 05020 05030 xxxxx 05500 xxxxx 05970 05980 05990 06000 06010 06020 06030 xxxxx xxxxx 06500 xxxxx 07000 xxxxx 07500 xxxxx 1 1 1 Ø4 3,97 3,98 3,99 4,00 4,01 4,02 4,03 u7 n 10 m8 j7 g7 f8 e8 x7 n 11 n7 j8 h8 h9 f9 r7 n8 js 7 h 10 n9 js 8 js 9 1 1 1 Ø5 4,97 4,98 4,99 5,00 5,01 5,02 5,03 u7 n 10 m8 j7 g7 f8 e8 x7 n 11 n7 j8 h8 h9 f9 r7 n8 js 7 h 10 n9 js 8 js 9 1 1 1 1 1 1 1 1 Ø6 5,97 5,98 5,99 6,00 6,01 6,02 6,03 u7 n 10 m8 j7 g7 f8 e8 x7 n 11 n7 j8 h8 h9 f9 r7 n8 js 7 h 10 n9 js 8 js 9 tolerance classes written in standard print are not optimally positioned in the tolerance field this tool concept permits numerous tolerances for xxxxx please indicate requested Ø in the order e.g Ø 8,82 mm article no 40 461 08820 steel stainless steel cast iron non ferrous metals heat resistant alloys hardened materials vc m/min for main and extended application 60-250 60-250 page 56 1 not available ex stock articles are non-returnable and cannot be exchanged delivery time 14 working days 04/22 www.wnt.com[close]
p. 24
reaming and countersinking solid carbide uni-hsr 1/100 machine reamer with internal cooling high speed reamer for universal application standard shank for clamping on centro-p or hydraulic expansion chuck Ø 3,70 5,50 0,004 Ø 5,51 20,20 0,005 highly irregular pitch through hole version with left-hand helix with coolant exit in chip flute z number of teeth tialn d2 4 d1 l2 l3 l1 d1 mm 7,97 7,98 7,99 8,00 8,01 8,02 8,03 8,04 8,20 8,21 8,49 8,50 8,51 8,99 9,00 9,01 9,20 9,21 9,49 9,50 9,51 9,96 9,97 9,98 9,99 10,00 10,01 10,02 10,03 10,04 10,20 10,21 10,49 10,50 10,51 10,99 11,00 11,01 11,49 11,50 11,51 11,96 11,97 11,98 11,99 12,00 12,01 12,02 12,03 l1 mm 100 100 100 100 100 100 100 100 100 100 100 100 100 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 l2 mm 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 l3 mm 64 64 64 64 64 64 64 64 60 60 60 60 60 80 80 80 80 80 80 80 80 80 80 80 75 75 75 75 75 75 75 75 75 75 75 75 75 75 d2 h6 mm 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 through hole right pg u4 article no z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 tolerances e.g Ø 10 f7 10,02 mm 7,97 7,98 7,99 8,00 8,01 8,02 8,03 s7 n8 k8 j7 g7 f7 e7 u7 n 10 m6 j8 h8 f8 e8 40 461 £ 175.59 175.59 175.59 162.24 175.59 175.59 175.59 200.04 200.04 200.04 200.04 188.91 200.04 200.04 200.04 200.04 200.04 200.04 200.04 233.37 244.50 244.50 244.50 302.25 302.25 302.25 302.25 302.25 302.25 302.25 326.73 326.73 326.73 326.73 311.16 326.73 326.73 326.73 40461 40461 40461 40461 40461 40461 40461 xxxxx xxxxx 40461 xxxxx 40461 xxxxx xxxxx 40461 xxxxx 40461 40461 40461 40461 40461 40461 40461 xxxxx xxxxx 40461 xxxxx 40461 xxxxx 40461 xxxxx 40461 40461 40461 40461 40461 40461 40461 07970 07980 07990 08000 08010 08020 08030 xxxxx xxxxx 08500 xxxxx 09000 xxxxx xxxxx 09500 xxxxx 09970 09980 09990 10000 10010 10020 10030 xxxxx xxxxx 10500 xxxxx 11000 xxxxx 11500 xxxxx 11970 11980 11990 12000 12010 12020 12030 n 11 m7 js 7 h9 f9 p7 m8 js 8 r7 n9 js 9 1 1 1 1 1 1 1 1 1 Ø8 1 1 1 1 1 1 1 1 Ø 10 9,97 9,98 9,99 10,00 10,01 10,02 10,03 s7 n8 k8 j7 g7 f7 e7 u7 n 10 m6 j8 h8 f8 e8 n 11 m7 js 7 h9 f9 p7 m8 js 8 r7 n9 js 9 Ø 12 11,97 11,98 11,99 12,00 12,01 12,02 12,03 n 11 n8 k8 j7 g6 f7 f8 r7 n9 m6 j8 h7 h9 s7 n 10 m7 js 7 h8 p7 m8 js 8 js 9 n7 steel stainless steel cast iron non ferrous metals heat resistant alloys hardened materials vc m/min for main and extended application 60-250 60-250 tolerance classes written in standard print are not optimally positioned in the tolerance field this tool concept permits numerous tolerances for xxxxx please indicate requested Ø in the order e.g Ø 8,82 mm article no 40 461 08820 page 56 1 not available ex stock articles are non-returnable and cannot be exchanged delivery time 14 working days continues on next page www.wnt.com 04/23[close]
p. 25
reaming and countersinking solid carbide uni-hsr 1/100 machine reamer with internal cooling high speed reamer for universal application standard shank for clamping on centro-p or hydraulic expansion chuck Ø 3,70 5,50 0,004 Ø 5,51 20,20 0,005 highly irregular pitch through hole version with left-hand helix with coolant exit in chip flute z number of teeth tialn d2 d1 l2 l3 l1 d1 mm 12,04 12,20 12,21 12,99 13,00 13,01 13,99 14,00 14,01 14,20 14,21 14,99 15,00 15,01 15,20 15,21 15,99 16,00 16,01 16,99 17,00 17,01 17,99 18,00 18,01 18,20 18,21 18,99 19,00 19,01 19,99 20,00 20,01 20,20 l1 mm 120 130 130 130 130 130 130 130 130 150 150 150 150 150 150 150 150 150 150 150 150 l2 mm 20 22 22 22 22 22 22 22 22 25 25 25 25 25 25 25 25 25 25 25 25 l3 mm 75 85 85 85 85 85 82 82 82 102 102 102 102 102 102 102 100 100 100 100 100 d2 h6 mm 12 14 14 14 14 14 16 16 16 16 16 16 18 18 18 18 20 20 20 20 20 through hole right pg u4 article no z 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 40 461 £ 333.39 333.39 333.39 344.52 344.52 344.52 344.52 344.52 344.52 344.52 355.59 355.59 355.59 355.59 411.18 411.18 411.18 411.18 411.18 440.07 440.07 xxxxx xxxxx 40461 xxxxx 40461 xxxxx xxxxx 40461 xxxxx xxxxx 40461 xxxxx 40461 xxxxx 40461 xxxxx xxxxx 40461 xxxxx 40461 xxxxx xxxxx xxxxx 13000 xxxxx 14000 xxxxx xxxxx 15000 xxxxx xxxxx 16000 xxxxx 17000 xxxxx 18000 xxxxx xxxxx 19000 xxxxx 20000 xxxxx 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 steel stainless steel cast iron non ferrous metals heat resistant alloys hardened materials vc m/min for main and extended application 60-250 60-250 page 56 1 not available ex stock articles are non-returnable and cannot be exchanged delivery time 14 working days for xxxxx please indicate requested Ø in the order e.g Ø 12.04 mm article no 40 461 12040 04/24 www.wnt.com[close]
Comments
no comments yet
