p. 1

[close]

p. 2

1 drilling hss drilling 2 3 4 5 solid carbide drilling indexable insert drilling 3 reaming countersinking hss taps and dies threading 6 7 8 circular thread milling thread turning turning tools turning 9 10 11 12 ecocut profilemaster grooving tools miniature turning tools hss milling cutters milling 13 14 solid carbide milling cutters milling tools with indexable inserts mould and die production rotating tool holders tool holders 15 16 tool holders static driven tools workpiece clamping modular toolholders 17 18 19 vices modular spindle tools article no index

[close]

p. 3

indexable insert drilling indexable insert drills indexable insert drill for universal application with state of the art helical chip flutes for turning drilling and milling centres maximum rigidity with minimum machining noise and low cutting forces diameter range 14 53 mm indexable insert drill for universal application with state of the art helical chip flutes for turning drilling and milling centres maximum rigidity with minimum machining noise and low cutting forces diameter range 14 53 mm indexable insert drill for universal application with state of the art helical chip flutes for turning drilling and milling centres maximum rigidity with minimum machining noise and low cutting forces diameter range 18 50 mm 12-19 pages 6 2xØ 7 12-19 3xØ 8 12-19 4xØ inserts for machining of steel stainless steel cast iron steel cwx 26 cwn 40 cwp 40 150-250 120-220 100-180 50-120 stainless steel cast iron 120-250 20-80 20-40 hrsa 12-19 pages xomt 9 wcgt -29 for machining of stainless steel long chipping steel stxx steel cwx 25 cwn 1435 150-300 120-220 stainless steel cast iron 120-250 hrsa 12-19 20-80 9 100-200 wcgt for machining of non-ferrous metals plastics titanium alloys titanium cwk 16 20-40 hrsa 50-200 aluminium 200-400 12-19 9 polydrill custom made special drills inquiries and orders for special drilling tools the easy way exclusively standard iso inserts diameter steps of 1/10mm weldon whistle-notch vdi or abs shanks fast and cost effective short delivery times you will find an inquiry form on page 20 03/2 www.wnt.com

[close]

p. 4

indexable insert drilling indexable insert drills pages 3xØ 3 high speed indexable insert drill for use on turning and milling machines diameter range 14 44 mm 12-19 10 inserts for machining of steel stainless steel cast iron aluminium steel cwx 1425 120-300 120-280 80-220 50-500 stainless steel pages cast iron 120-300 20-100 40-120 12-19 non ferrous metals hrsa 11 sclt hcn 1440 cwk 26 the correct tool for your application polydrill or highfeeddrill universal application less stable machines low-power machines high-performance cutting stable machines high-power machines stable work holding thro coolant pressure 10 bar universal application maximum feedrates www.wnt.com 03 3

[close]

p. 5

indexable insert drilling universal indexable insert drill characteristics benefits coated high quality trigoninserts with tried and tested geometry high cutting speed and feed low cutting forces excellent chip control special arrangement of the inserts balance cutting forces no deflection large drilling depths with consistent hole quality and high concentricity technically advanced drill design with large chip flutes maximum rigidity hole straightness minimum noise helical chip flutes with coolant flow directly to the cutting edge minimal deflection and reduced cutting forces optimum chip transport and drill depths to 4 x d stationary and rotating tools horizontal and vertical application guide for insert selection steel machining stainless machining cast iron machining peripheral grade cwx 26 cwx25 central grade cwn 40 cwn1435 peripheral and central grades both cwn 40 cwn 1435 peripheral and central grades both cwx 26 cwx 25 03/4 www.wnt.com

[close]

p. 6

indexable insert drilling 3 high speed indexable insert drill process security and productivity the new impact drill was specifically developed for high-performance cutting the combination of process security and maximum feed rates makes it the first choice when maximum metal removal rates are required in drilling operations characteristics benefits optimized insert design reinforced cutting edges and positive chip geometry stability and high service life tool helical tool body surface hardened and coated with highlight coating long tool life resistant to abrasion adapted chip groove geometry for secure chip evacuation swarf control ­ secure chip evacuation even when cutting longchipping materials holes without scoring caused by return movement location face stable position of holes even under difficult conditions stationary and rotating tools horizontal and vertical application guide for insert selection steel machining stainless machining cast iron machining peripheral grade cwx 1425 central grade hcn 1440 peripheral and central grade both hcn 1440 peripheral and central grade both cwx 1425 www.wnt.com 03 5

[close]

p. 7

indexable insert drilling polydrill indexable insert drill 2 x Ø scope of supply indexable insert drill incl clamping screws 2xd-14,0 2xd-14,5 2xd-15,0 2xd-15,5 2xd-16,0 2xd-16,5 2xd-17,0 2xd-17,5 2xd-18,0 2xd-19,0 2xd-20,0 2xd-21,0 2xd-22,0 2xd-23,0 2xd-24,0 2xd-25,0 2xd-26,0 2xd-27,0 2xd-28,0 2xd-29,0 2xd-30,0 2xd-31,0 2xd-32,0 2xd-34,0 2xd-35,0 2xd-36,0 2xd-37,0 2xd-38,0 2xd-39,0 2xd-40,0 2xd-42,0 2xd-44,0 2xd-46,0 2xd-48,0 2xd-50,0 2xd-53,0 d1 mm 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 31.0 32.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 42.0 44.0 46.0 48.0 50.0 53.0 d3 mm 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 49 49 49 49 49 49 49 49 49 49 49 49 59 59 59 59 d2 mm 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32 32 32 32 32 40 40 40 40 l1 mm 114 115 116 117 118 119 120 121 122 124 126 128 130 132 134 136 138 140 142 144 150 152 154 158 160 162 164 166 168 170 174 178 197 197 205 211 l3 mm 30 31 32 33 34 35 36 37 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 70 72 74 76 78 80 82 86 90 94 94 102 108 l4 mm 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 58 58 58 58 58 58 58 58 58 58 58 58 68 68 68 68 right-hand pg 2b article no insert wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 10 800 £ 182.26 182.26 182.26 182.26 182.26 182.26 182.26 182.26 182.26 191.91 191.91 191.91 191.91 198.61 210.17 210.17 210.17 210.17 210.17 210.17 223.65 223.65 223.65 223.65 237.22 263.22 263.22 263.22 263.22 263.22 263.22 281.57 281.57 292.17 292.17 292.17 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 10800 140 145 150 155 160 165 170 175 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 340 350 360 370 380 390 400 420 440 460 480 500 530 pg 2a pg 2a pg 2a torx screws article no spare parts d1 14 17.5 18 23 24 29 30 53 key d article no £ 6.73 6.73 6.73 6.73 clamping screw 70 950 70950 £ 1.66 100 70 950 70950 70950 70 950 £ 1.43 111 1.54 112 1.74 113 70950 70950 70950 article no 70950 70950 118 104 105 102 during the drilling operation a sharp disk will result safety precautions must be observed a safety guard has to be provided as protection 03 6 www.wnt.com

[close]

p. 8

indexable insert drilling polydrill indexable insert drill 3 x Ø scope of supply indexable insert drill incl clamping screws 3 right-hand pg 2b article no insert wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 020204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 pg £ 191.91 014 191.91 145 191.91 015 191.91 155 191.91 016 191.91 165 191.91 017 191.91 975 191.91 180 191.91 185 191.91 190 191.91 195 191.91 200 191.91 205 191.91 210 191.91 215 191.91 220 191.91 225 198.61 230 198.61 235 210.17 240 210.17 245 210.17 250 210.17 255 210.17 260 210.17 265 210.17 270 210.17 280 210.17 290 223.65 300 223.65 310 223.65 320 223.65 330 223.65 340 237.22 350 263.22 360 263.22 370 263.22 380 263.22 390 263.22 400 263.22 410 263.22 420 263.22 430 281.57 440 281.57 450 281.57 460 281.57 470 292.17 480 292.17 490 292.17 500 292.17 510 292.17 520 292.17 530 pg 2a 2a 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 10807 3xd-14,0 3xd-14,5 3xd-15,0 3xd-15,5 3xd-16,0 3xd-16,5 3xd-17,0 3xd-17,5 3xd-18,0 3xd-18,5 3xd-19,0 3xd-19,5 3xd-20,0 3xd-20,5 3xd-21,0 3xd-21,5 3xd-22,0 3xd-22,5 3xd-23,0 3xd-23,5 3xd-24,0 3xd-24,5 3xd-25,0 3xd-25,5 3xd-26,0 3xd-26,5 3xd-27,0 3xd-28,0 3xd-29,0 3xd-30,0 3xd-31,0 3xd-32,0 3xd-33,0 3xd-34,0 3xd-35,0 3xd-36,0 3xd-37,0 3xd-38,0 3xd-39,0 3xd-40,0 3xd-41,0 3xd-42,0 3xd-43,0 3xd-44,0 3xd-45,0 3xd-46,0 3xd-47,0 3xd-48,0 3xd-49,0 3xd-50,0 3xd-51,0 3xd-52,0 3xd-53,0 d1 mm 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 20.5 21.0 21.5 22.0 22.5 23.0 23.5 24.0 24.5 25.0 25.5 26.0 26.5 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0 46.0 47.0 48.0 49.0 50.0 51.0 52.0 53.0 d3 mm 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 59 59 59 59 59 59 59 59 59 d2 mm 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 40 40 40 40 40 40 40 40 40 l1 mm 128.0 132.5 131.0 132.5 134.0 135.5 137.0 138.5 140.0 141.5 143.0 144.5 146.0 147.5 149.0 150.5 152.0 153.5 155.0 156.5 158.0 159.5 161.0 162.5 164.0 165.5 167.0 170.0 173.0 180.0 183.0 186.0 189.0 192.0 195.0 198.0 201.0 204.0 207.0 210.0 213.0 216.0 219.0 222.0 240.0 243.0 246.0 249.0 252.0 255.0 258.0 261.0 264.0 l3 mm 44.0 48.5 47.0 48.5 50.0 51.5 53.0 54.0 56.0 57.5 59.0 60.5 62.0 63.5 65.0 66.5 68.0 69.5 71.0 72.5 74.0 75.5 77.0 78.5 80.0 81.5 83.0 86.0 89.0 92.0 95.0 98.0 101.0 104.0 107.0 110.0 113.0 116.0 119.0 122.0 125.0 128.0 131.0 134.0 137.0 140.0 143.0 146.0 149.0 152.0 155.0 158.0 161.0 l4 mm 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 68 68 68 68 68 68 68 68 68 10 807 left-hand pg 2b article no 10 808 £ 191.91 191.91 191.91 191.91 191.91 198.61 210.17 210.17 210.17 210.17 210.17 210.17 223.65 223.65 223.65 263.22 10808 180 190 200 210 220 230 240 250 260 270 280 290 300 320 340 360 10808 10808 10808 10808 10808 10808 10808 10808 10808 10808 10808 10808 10808 10808 10808 263.22 10808 400 pg 2a torx screws article no spare parts d1 14 17.5 18 23.5 24 29 30 53 during the drilling operation a sharp disk will result safety precautions must be observed a safety guard has to be provided as protection key d article no £ 6.73 6.73 6.73 6.73 clamping screw 70 950 70950 £ 1.66 100 70 950 70950 70950 70 950 £ 1.43 111 1.54 112 1.74 113 70950 70950 70950 article no 70950 70950 118 104 105 102 www.wnt.com 03 7

[close]

p. 9

indexable insert drilling polydrill indexable insert drill 4 x Ø scope of supply indexable insert drill incl clamping screws 4xd-18,0 4xd-18,5 4xd-19,0 4xd-19,5 4xd-20,0 4xd-20,5 4xd-21,0 4xd-21,5 4xd-22,0 4xd-22,5 4xd-23,0 4xd-23,5 4xd-24,0 4xd-24,5 4xd-25,0 4xd-25,5 4xd-26,0 4xd-26,5 4xd-27,0 4xd-28,0 4xd-29,0 4xd-30,0 4xd-31,0 4xd-32,0 4xd-33,0 4xd-34,0 4xd-35,0 4xd-36,0 4xd-37,0 4xd-38,0 4xd-39,0 4xd-40,0 4xd-41,0 4xd-42,0 4xd-43,0 4xd-44,0 4xd-45,0 4xd-46,0 4xd-47,0 4xd-48,0 4xd-49,0 4xd-50,0 d1 mm 18.0 18.5 19.0 19.5 20.0 20.5 21.0 21.5 22.0 22.5 23.0 23.5 24.0 24.5 25.0 25.5 26.0 26.5 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0 46.0 47.0 48.0 49.0 50.0 d3 mm 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 59 59 59 59 59 59 d2 mm 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 40 40 40 40 40 40 l1 mm 158 160 162 164 166 168 170 172 174 176 178 180 182 184 186 188 190 192 194 198 202 210 214 218 222 226 230 234 238 242 246 250 254 258 262 266 285 289 293 297 301 305 l3 mm 74 76 78 80 82 84 86 88 90 92 94 96 98 100 102 104 106 108 110 114 118 122 126 130 134 138 142 146 150 154 158 162 166 170 174 178 182 186 190 194 198 202 l4 mm 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 68 68 68 68 68 68 right-hand pg 2b article no insert wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 030204 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 050304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 060304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 wcgt xomt 07t304 10 802 £ 234.97 234.97 234.97 234.97 234.97 234.97 234.97 234.97 234.97 234.97 243.26 243.26 256.15 256.15 256.15 256.15 256.15 256.15 256.15 256.15 256.15 268.14 268.14 268.14 268.14 268.14 268.14 316.05 316.05 316.05 316.05 316.05 316.05 316.05 316.05 339.09 339.09 339.09 339.09 427.00 427.00 427.00 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 10802 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 pg 2a pg 2a key d article no clamping screw spare parts d1 18 23.5 24 29 30 50 70 950 70950 70950 £ 6.73 104 6.73 105 6.73 102 70950 70 950 70950 70950 article no £ 1.43 111 1.54 112 1.74 113 70950 during the drilling operation a sharp disk will result safety precautions must be observed a safety guard has to be provided as protection 03 8 www.wnt.com

[close]

p. 10

indexable insert drilling inserts for polydrill indexable insert drill xomt wcgt wcgt-29 designation xomt 0202 wcgt 0202 xomt 0302 wcgt 0302 wcgt 0503 xomt 0503 wcgt 0603 xomt 0603 wcgt 07t3 xomt 07t3 pg r 0.4 r 0.4 r 0.4 r 0.4 r 0.4 article no xomt 020204sn £ xomt 030204sn £ xomt 050304sn £ xomt 060304sn £ xomt 07t304sn £ steel stainless steel cast iron non ferrous metals heat resistant alloys relevant tools on page 6 8 page 16 pg r 0.4 r 0.4 r 0.4 r 0.4 article no wcgt 030204sn £ wcgt 050304sn £ wcgt 060304sn £ wcgt 07t304sn £ steel stainless steel cast iron non ferrous metals heat resistant alloys relevant tools on page 6 8 page 16 pg r 0.4 r 0.4 r 0.4 r 0.4 r 0.4 article no wcgt 020204sn £ wcgt 030204sn £ wcgt 050304sn £ wcgt 060304sn £ wcgt 07t304sn £ steel stainless steel cast iron non ferrous metals heat resistant alloys relevant tools on page 6 8 page 16 1a cwx 25 198 9.38 200 9.38 202 9.81 204 10.44 206 11.17 10815 10815 10815 10815 10815 l mm 3.37 3.37 3.97 3.97 5.29 5.29 6.62 6.62 7.94 7.94 d mm 5.5 5.5 6.0 6.0 8.0 8.0 10.0 10.0 12.0 12.0 s mm 2.3 3.8 2.5 2.5 3.0 3.0 3.0 3.0 3.8 3.8 d1 mm 2.25 4.40 2.50 2.50 2.80 2.80 4.00 4.00 4.40 4.40 1a cwx 26 198 6.99 200 6.99 202 7.32 204 7.78 206 8.38 10814 10814 10814 10814 10814 84° 3 d1 d l s xomt 10 814 1a cwn 40 398 6.80 400 6.80 402 7.06 404 7.50 406 8.06 10814 10814 10814 10814 10814 8° r cwn 1435 1a cwp 40 500 5.98 502 6.34 504 6.60 506 7.11 10814 10814 10814 10814 cwk 16 120-300 120-300 100-300 80-250 160-220 20-100 30-150 20-80 wcgt 10 812 cwx 26 cwn 40 cwn 1435 cwp 40 1a cwk 16 600 8.12 602 8.36 604 8.43 606 9.73 10812 10812 10812 10812 50-500 40-120 wcgt-29 10 815 cwn 40 1a cwn 1435 450 9.82 452 10.03 454 10.87 456 11.43 10815 10815 10815 10815 cwp 40 cwk 16 120-350 100-280 100-300 80-250 160-220 20-100 www.wnt.com 03/9

[close]

p. 11

indexable insert drilling highfeeddrill tool bodies 3 x Ø scope of supply tool holder clamping screws drilling accuracy nominal diameter ±0,2mm 3xd-14,0 3xd-14,5 3xd-15,0 3xd-15,5 3xd-16,0 3xd-16,5 3xd-17,0 3xd-17,5 3xd-18,0 3xd-18,5 3xd-19,0 3xd-19,5 3xd-20,0 3xd-20,5 3xd-21,0 3xd-21,5 3xd-22,0 3xd-22,5 3xd-23,0 3xd-23,5 3xd-24,0 3xd-24,5 3xd-25,0 3xd-25,5 3xd-26,0 3xd-26,5 3xd-27,0 3xd-28,0 3xd-29,0 3xd-30,0 3xd-31,0 3xd-32,0 3xd-33,0 3xd-34,0 3xd-35,0 3xd-36,0 3xd-37,0 3xd-38,0 3xd-39,0 3xd-40,0 3xd-41,0 3xd-42,0 3xd-43,0 3xd-44,0 d1 mm 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 20.5 21.0 21.5 22.0 22.5 23.0 23.5 24.0 24.5 25.0 25.5 26.0 26.5 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 d3 mm 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 39 39 39 39 39 39 39 39 39 39 39 39 39 50 50 50 50 50 50 50 50 50 50 50 50 d2 mm 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32 32 32 32 32 32 40 40 40 40 40 40 40 40 40 40 40 40 l1 mm 116 119 119 122 122 125 125 134 134 137 137 140 140 143 143 146 146 149 149 156 156 159 159 162 162 165 165 168 171 179 182 185 196 199 202 205 218 221 224 227 230 233 236 239 l3 mm 42 45 45 48 48 51 51 54 54 57 57 60 60 63 63 66 66 69 69 72 72 75 75 78 78 81 81 84 87 90 93 96 99 102 105 108 111 114 117 120 123 126 129 132 l4 mm 50 50 50 50 50 50 50 56 56 56 56 56 56 56 56 56 56 56 56 60 60 60 60 60 60 60 60 60 60 60 60 60 68 68 68 68 68 68 68 68 68 68 68 68 pg 2b article no insert sclt 042204 sclt 042204 sclt 042204 sclt 042204 sclt 042204 sclt 052404 sclt 052404 sclt 052404 sclt 052404 sclt 062806 sclt 062806 sclt 062806 sclt 062806 sclt 062806 sclt 073206 sclt 073206 sclt 073206 sclt 073206 sclt 073206 sclt 073206 sclt 073206 sclt 083608 sclt 083608 sclt 083608 sclt 083608 sclt 083608 sclt 083608 sclt 083608 sclt 104208 sclt 104208 sclt 104208 sclt 104208 sclt 104208 sclt 104208 sclt 125008 sclt 125008 sclt 125008 sclt 125008 sclt 125008 sclt 125008 sclt 125008 sclt 125008 sclt 125008 sclt 125008 pg 2a pg 2a 10 809 £ 242.92 242.92 242.92 242.92 242.92 242.92 242.92 242.92 245.66 245.66 245.66 245.66 245.66 245.66 245.66 256.66 256.66 256.66 256.66 256.66 256.66 256.66 256.66 256.66 256.66 256.66 256.66 286.92 286.92 286.92 286.92 286.92 286.92 368.50 368.50 368.50 368.50 368.50 368.50 368.50 368.50 368.50 368.50 368.50 pg 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 10809 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410 420 430 440 2a torx screws article no spare parts d1 14 16 16.5 18 18.5 20.5 21 24 24.5 28 29 34 35 44 during the drilling operation a sharp disk will result safety precautions must be observed a safety guard has to be provided as protection £ key d article no £ 6.73 6.73 6.73 6.73 6.73 6.73 6.73 clamping screw 70 950 70 950 70950 70950 70 950 70950 70950 article no 70950 1.74 838 70950 70950 70950 70950 70950 118 118 104 105 105 102 103 £ 1.59 335 1.82 274 1.43 111 70950 1.43 115 1.74 110 1.74 301 70950 70950 70950 03 10 www.wnt.com

[close]

p. 12

indexable insert drilling inserts for highfeeddrill indexable insert drill sclt designation sclt 0422 sclt 0524 sclt 0628 sclt 0732 sclt 0836 sclt 1042 sclt 1250 pg r 0.4 r 0.4 r 0.6 r 0.6 r 0.8 r 0.8 r 0.8 article no sclt 042204 £ sclt 052404 £ sclt 062806 £ sclt 073206 £ sclt 083608 £ sclt 104208 £ sclt 125008 £ steel stainless steel cast iron non ferrous metals heat resistant alloys relevant tools on page 10 page 18-19 l mm 4.8 5.4 6.2 7.2 8.6 10.0 12.3 s mm 2.2 2.4 2.8 3.2 3.6 4.2 5.0 d1 mm 2.10 2.25 2.50 2.80 3.40 4.40 5.50 d mm 4.8 5.4 6.2 7.2 8.6 10.0 12.3 1a cwk 26 604 5.46 605 5.46 606 5.68 607 6.00 608 6.10 610 6.30 612 6.51 10817 10817 10817 10817 10817 10817 10817 3 sclt-f30 10 817 cwx 1425 hcn 1440 50-500 40-120 sclt-f50 pg r 0.4 r 0.4 r 0.6 r 0.6 r 0.8 r 0.8 r 0.8 article no sclt 042204 £ sclt 052404 £ sclt 062806 £ sclt 073206 £ sclt 083608 £ sclt 104208 £ sclt 125008 £ steel stainless steel cast iron non ferrous metals heat resistant alloys 10 819 1a cwx 1425 004 6.65 005 6.65 006 6.99 007 7.08 008 7.28 010 7.50 012 7.70 10819 10819 10819 10819 10819 10819 10819 1a hcn 1440 904 7.08 905 7.08 906 7.28 907 7.50 908 7.70 910 7.70 912 8.06 10819 10819 10819 10819 10819 10819 10819 cwk 26 120-300 120-300 120-280 80-220 20-100 relevant tools on page 10 page 18-19 application information hole diameter the highfeeddrill operates with a controlled deviation of approx 0,1 mm this means the measured tool diameter is smaller than the nominal diameter drilling tolerance nominal diameter ± 0.2mm example drill diameter 22 mm ­ diameter measured on the tool 21.8 mm in stationary applications on lathes the tool can be deviated max 0.25 mm example tool diameter 21 mm maximum achievable hole diameter 21.5 mm www.wnt.com 03/11

[close]

p. 13

indexable insert drilling technical references indexable insert drills with helical chip flutes optimum radial force compensation 2xd Ø 14 53 mm fa1,2 feed force 3xd Ø 14 53 mm optimum compensation of radial forces and chip evacuation low deflection 4xd Ø 18 50 mm possible transverse forces are absorbed without problems in case of fixed applications the drill must be set concentrically to the machine axis holes which are larger than the nominal diameter can only be produced when machining parallel to the edge in the direction of the exterior cutting edge flat work piece surface convex work piece surface with stable conditions and straight workpiece surfacesfull feed rate can be used cutting data table pages 16 17 drill entrance into convex workpiece surfaces where the central insert cuts first under normal circumstances there are no difficulties in drilling concave/oblique work piece surfaces with the drill entrance into angled or concave workpiece surfaces the external insert cuts first it is recommended the feed rate until fully engaged be reduced by approx 30 50 03/12 www.wnt.com

[close]

p. 14

indexable insert drilling technical references indexable insert drills with helical chip flutes drill enters transverse hole drill exit on oblique surfaces 3 reduce the feed when the drill enters the transverse hole with transverse through holes you should drill from both sides if possible in case of drill exit on oblique workpiece surfaces reduce the feed by 30 50 drilling into full material off-centre drilling into full material feed rate longitudinal turning external longitudinal turning internal feed rate ap max 0,2 x inscribed circle of indexable insert d ap max 0,2 x inscribed circle of indexable insert d face turning table for inner circle Ø d feed rate ~¼d wsp.gr wcgt/xomt wcgt/xomt wcgt/xomt wcgt/xomt wcgt/xomt 02 03 05 06 07 d in mm 5,5 6,0 8,0 10,0 12,0 ap max 0,3mm inscribed circle of indexable insert d d 5,5 mm d 6mm d 8mm ap max 0,6 mm inscribed circle of indexable insert d d 10mm d 12mm www.wnt.com 03/13

[close]

p. 15

indexable insert drilling maximum off set x for off -centre drilling into full material with stationary applications when drilling off -centre the radial forces are not compensated which results in instability permissible feed rates for xmax f 0,05 0,08 mm/u with maximum offset xmax the hole will be dmax d 2xmax e.g for d 20 mm xmax 1,6 mm dmax d 3,2 23,2 mm Ø d mm inserts size xmax mm 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 06 05 03 02 2,0 1,8 1,5 1,2 2,0 1,8 1,6 1,3 1,0 0,8 2,3 2,2 2,0 1,8 1,6 1,5 3,2 3,2 3,2 3,0 Ø dmax mm 18,0 18,6 19,0 19,4 22,0 22,6 23,2 23,6 24,0 24,6 28,6 29,4 30,0 30,6 31,2 32,0 36,4 37,4 38,4 39,0 Ø d mm inserts size xmax mm 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 07 06 2,7 2,5 2,2 1,9 3,5 3,3 3,0 2,8 2,5 2,3 2,0 1,9 1,8 1,5 1,4 1,2 1,0 0,7 0,6 0,5 Ø dmax mm 39,4 40,0 40,4 40,8 45,0 45,6 46,0 46,6 47,0 47,6 48,0 48,8 49,6 50,0 50,8 51,4 52,0 52,4 53,2 54,0 03/14 www.wnt.com

[close]

p. 16

indexable insert drilling technical information machining situations drilling on uneven surface cast iron depending on the surface quality reduce feed rate if necessary 3 drilling on a forged welded or cast seam reduce feed rate use max 3xd tools drilling on inclined surfaces up to max 3° inclination it is not necessary to reduce the feed rate inclined cast iron surfaces 3° inclination reduce feed rate up to 50 until the full nominal diameter is engaged oblique exit of drill 3° inclination reduce feed rate up to 50 from interrupted cut onwards producing a cross hole reduce feed rate up to 50 depending on the proportion of hole to transverse hole drilling of a convex surface possible without problems reduce feed rate up to 50 depending on the proportion of radius to spherical surface spot drilling in a bead or central hole face machining reduce feed rate up to 50 chain drilling of a pocket first drill holes 1 and 2 ­ then the hole in between 3 ensure symmetric distribution avoid chip jamming reduce feed rate up to 50 from interrupted cut 3 onwards producing through holes in multiple work pieces possible good work piece clamping necessary recommended coolant pressure and coolant flow 35 30 flow volume [litres/min 25 to Ø 23 mm to Ø 37 mm to Ø 53 mm flow volume [litres/min 20 15 to Ø 22,9 mm to Ø 28 mm to Ø 44 mm 10 5 pressure bar 0 0 10 20 30 pressure bar 40 50 60 70 www.wnt.com min coolant 03 15

[close]

p. 17

indexable insert drilling material examples referring to the wnt cutting data tables material strength n/mm² hb 800 n/mm2 800 n/mm2 800 n/mm2 1000 n/mm2 850 n/mm2 1000 n/mm2 800 n/mm2 1300 n/mm2 850 n/mm2 1000 n/mm2 1200 n/mm2 1200 n/mm2 1200 n/mm2 1300 n/mm2 1300 n/mm2 1300 n/mm2 850 n/mm2 750 n/mm2 900 n/mm2 1100 n/mm2 850 n/mm2 750 n/mm2 1100 n/mm2 100 350 n/mm2 300 1000 n/mm2 300 500 n/mm2 550 800 n/mm2 350 450 n/mm2 500 650 n/mm2 350 450 n/mm2 500 700 n/mm2 350 n/mm2 500 n/mm2 400 n/mm2 400 n/mm2 400 n/mm2 350 n/mm2 700 n/mm2 200 hb 300 hb 300 hb 600 n/mm2 600 n/mm2 material number 1.0037 1.0718 1.0401 1.7131 1.0503 1.0601 1.5131 1.5755 0.9650 1.8504 1.8515 1.3505 1.5026 1.3344 1.2312 1.2343 1.4305 1.4510 1.4034 1.4313 1.4460 1.4301 1.4747 0.6010 0.6030 0.7040 0.7060 0.8035 0.8055 0.8135 0.8155 3.0255 3.0515 3.2152 3.2381 2.0060 2.0240 2.0916 2.0978 2.1247 2.0360 2.0335 material designation material number 1.0570 1.0727 1.0481 1.7015 1.1191 1.1221 1.7030 1.7033 1.6750 1.8507 1.8523 1.3543 1.7176 1.3255 1.2379 1.2767 1.4105 1.4528 1.4116 1.4028 1.4821 1.4571 1.4876 0.6025 0.6045 0.7050 0.7080 0.8045 0.8065 0.8145 0.8170 3.3308 3.1355 3.2373 3.5562 2.0090 2.0265 2.1525 material designation material number 1.0060 1.0757 1.1141 1.5919 1.0535 1.0540 1.7225 1.3565 1.6582 1.8509 1.8550 1.3520 1.7701 1.3294 1.2316 1.2842 1.4107 1.4016 1.4106 1.4104 1.4462 1.4449 1.4825 material designation general construction steel free cutting steel case hardened steel non alloyed alloyed case hardened steel tempering steel non alloyed tempering steel non alloyed tempering steel alloyed a tempering steel alloyed steel castings nitriding steel nitriding steel roller bearing steel spring steel high-speed steel cold working tool steel hot working tool steel steel and sulphured cast stainless steel stainless steel ferritic stainless steel martensitic stainless steel ferritic/martensitic stainless steel austenitic/ferritic stainless steel austenitic heat resistant grey cast iron with lamellar graphite grey cast iron with lamellar graphite spheroidal cast iron r f spheroidal cast iron white cast iron tempered white cast iron tempered black cast iron tempered black cast iron tempered aluminium non alloyed low alloyed aluminium alloys 0.5 si aluminium alloys 0.5-10 si aluminium alloys 10-15 si aluminium alloys 15 si copper non alloyed low alloyed copper wrought alloys special copper alloys special copper alloys special copper alloys short-chipping brass bronze red bronze long-chipping brass thermoplastics duroplastics fibre-reinforced plastics magnesium and magnesium alloys graphite tungsten and tungsten alloys molybdenum and molybdenum alloys pure nickel nickel alloys nickel alloys nickel-chromium alloys nickel and cobalt alloys nickel and cobalt alloys heat resistant alloys nickel-cobalt-chromium alloys pure titanium titanium alloys titanium alloys n 850 n/mm2 3.5200 850 n/mm2 1300 n/mm2 1300 n/mm2 1300 n/mm2 1400 n/mm2 900 n/mm2 700 n/mm2 1200 n/mm2 45 hrc 46 55 hrc 56 60 hrc 61 65 hrc 65 70 hrc s 1.3911 1.3912 2.4360 2.4886 2.4632 2.4654 2.4806 3.7025 3.7114 3.7164 st37-2 9smnpb28 11smnpb30 c15 16mncr5 ec80 c45 c60 50mnsi4 31nicr14 g-x260cr27 34cral6 31crmo12 100cr6 w3 55si7 s 6-5-3 40crmnmos8 6 x38crmov 5 1 x8crnis18 9 x3crti17 x46cr13 x3crni13-4 x8crnimo27 5 x5crni18-10 x80crnisi20 gg10 gg30 ggg40 ggg60 gtw35 gtw55 gts35 gts55 al99,5 almn1 gd-alsi6cu4 g-alsi10mg g-alsi17cu4 e-cu57 cuzn15 cual5 cual11ni6fe5 cube2f125 cuzn40 ms60 cuzn36 ms63 delrin hostalen ferrozell bakelit glass-fibre reinforced m2 mgmn2 c8000 r8500x w-nife densimet w mo mo-50re rni24 ni36 invar s-nicu 30 fe sg-nimo16cr16w nicr20co18ti nicr20co13mo4ti3al hardox 400 sg-nicr20nb inconel 82 ti99,8 tial5sn2 tial5v4 st52-3 45s20 17mn4 13cr3 ec60 ck45 ck60 28cr4 34cr4 gs-20nicrmo3 7 34almo5 39crmov19 3 x192crmo17 55cr3 s 18-1-2-5 x155crvmo12 1 x45nicrmo4 x4crmos18 x105crcomo18 2 x50crmov15 x30cr13 x20crnisi25 4 x6crnimoti17 12 2 x10nicralti32-21 gg25 gg45 ggg50 ggg80 gtw45 gtw65 gts45 gts70 al99,9mg0,5 alcumg2 gd-alsi9mg g-mgal6 g-alsi25cunimg sf-cu cuzn30 cusi3mn st60-2 46spb2 c15e ck15 15crni6 c55 c50 42crmo4 48crmo4 gs-34 crnimo 6 41cralmo7 34 cralni 7 100 crmn 6 w4 51crmov4 pmhs6-5-3-8 asp30 x38crmo16 ramax 90mncrv8 gx8crni12 x6cr17 x2crmosis18-2-1 x14crmos17 x2crnimon22-5-3 duplex x3crnimo18-12-3 gx25crnisi18-9 3.0256 3.3315 3.2134 3.2525 2.1522 2.0321 2.0380 2.1293 3.5612 1.3927 1.3924 2.4610 2.4631 2.4654 1.4939 2.4851 3.7034 3.7174 3.7144 cuzn39pb2 ms58 cucrzr makrolon novodur pertinax carbon-fibre reinforced mgal6zn1 r8650 w-cu80/20 tzc tzm rni8 ni54 nicu 30 fe nimo16cr16ti nicr20tial nicr19co14mo4ti x12crnimo12 nicr23fe inconel 601 ti99,7 tial6v6sn2 tial6sn2zr4mo2 2.0410 2.1080 3.5812 1.3926 1.3921 1.4980 2.4667 3.7064 3.7124 3.7154 e-al h almg1 gd-alsi5cu1mg s-alsi12 g-alsi21cunimg cusl2mn cuzn37 ampco 8-16 ampco 18-26 ampco m-4 cuzn44pb2 cusn6zn6 acrylic glass polystyrol resopal amide-fibre reinforced mgal8zn1 technograph15 w93nife denal mhc ods rni12 ni49 monel 400 hastelloy c-276 nimonic 80 waspaloy x6nicrtimovb25-15-2 sg-nicr19nbmoti ti99,5 ticu2 tial6zr5 h tempered steel 03 16 www.wnt.com

[close]

p. 18

indexable insert drilling cutting data appoximate values for polydrill insert drill cutting speed vc cwx25 250-350 250-350 200-280 200-250 200-280 200-270 200-275 130-180 130-180 130-180 130-180 130-180 130-180 130-180 120-170 120-170 cwx26 cwn40 cwn1435 cwp40 220-300 220-300 180-250 180-220 200-280 180-250 140-220 120-160 120-160 120-160 120-160 120-160 120-160 120-160 100-150 100-150 180-250 180-250 180-250 100-140 80-140 180-250 80-140 cwk16 nominal feed rate in relation to diameter Ø Ø 14-17,5 18-23,5 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 200-500 200-500 200-500 200-500 200-500 180-240 180-240 180-240 180-240 180-240 180-240 180-240 50-180 50-180 50-150 0,08 0,08 0,08 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,10 0,10 0,09 0,09 0,09 0,11 0,11 0,12 0,12 0,11 0,11 0,11 0,11 0,10 0,10 0,10 0,10 0,10 0,11 0,11 0,11 0,11 0,11 0,11 0,11 0,07 0,07 0,07 Ø 24-29 0,10 0,10 0,10 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,14 0,14 0,12 0,12 0,12 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,15 0,15 0,15 0,15 0,15 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,10 0,10 0,10 Ø 30-36 0,14 0,14 0,14 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,18 0,18 0,16 0,16 0,16 0,20 0,20 0,20 0,20 0,20 0,20 0,20 0,20 0,21 0,21 0,21 0,21 0,21 0,21 0,21 0,21 0,21 0,21 0,21 0,21 0,14 0,14 0,14 Ø 37-41 0,17 0,17 0,17 0,18 0,18 0,18 0,18 0,18 0,18 0,18 0,18 0,18 0,18 0,18 0,18 0,18 0,18 0,18 0,20 0,20 0,18 0,18 0,18 0,23 0,23 0,22 0,22 0,23 0,23 0,23 0,23 0,24 0,24 0,24 0,24 0,24 0,23 0,23 0,23 0,23 0,23 0,23 0,23 0,17 0,17 0,17 Ø 42-53 0,23 0,23 0,23 0,20 0,20 0,20 0,20 0,20 0,20 0,20 0,20 0,20 0,20 0,20 0,20 0,20 0,18 0,18 0,21 0,21 0,18 0,18 0,18 0,25 0,25 0,23 0,23 0,25 0,25 0,25 0,25 0,26 0,26 0,26 0,26 0,26 0,25 0,25 0,25 0,25 0,25 0,25 0,25 0,19 0,19 0,19 a 220-300 210-290 210-290 200-280 200-270 180-250 150-200 150-200 150-200 150-200 150-200 150-200 150-200 120-170 120-170 r 180-280 160-260 120-190 100-180 140-210 100-150 140-210 100-150 200-300 180-280 140-210 120-200 160-230 120-170 160-230 120-170 220-300 180-250 180-220 200-280 180-250 140-220 120-160 120-160 120-160 120-160 120-160 120-160 120-160 100-150 100-150 180-250 180-250 180-250 100-140 80-140 180-250 80-140 3 60-150 60-150 60-150 30-100 60-150 f n 160-220 160-220 160-220 160-220 160-220 160-220 160-220 160-220 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,04 0,04 0,04 50-80 100-140 20-80 20-80 20-80 20-80 20-80 20-80 20-80 20-80 40-100 40-80 40-80 20-80 20-80 20-80 20-80 20-80 20-80 20-80 20-80 40-100 40-80 40-80 20-40 20-40 20-40 20-40 20-40 20-40 20-40 20-40 30-80 s 40-120 40-100 40-100 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,06 0,06 0,07 0,07 0,07 0,07 0,07 0,07 0,07 0,07 0,08 0,08 0,07 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,09 0,10 0,10 0,09 0,12 0,12 0,11 0,11 0,11 0,11 0,11 0,11 0,11 0,11 0,14 0,14 0,11 0,14 0,14 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,16 0,16 0,13 0,18 0,18 0,14 0,14 0,14 0,14 0,14 0,14 0,14 0,14 0,19 0,19 0,14 the nominal feed rate h applies for tools 2 3 4 x d and can be adapted according to the conditions by ± 20 www.wnt.com 03 17

[close]

p. 19

indexable insert drilling material examples referring to the wnt cutting data tables material strength n/mm² hb 800 n/mm2 800 n/mm2 800 n/mm2 1000 n/mm2 850 n/mm2 1000 n/mm2 800 n/mm2 1300 n/mm2 850 n/mm2 1000 n/mm2 1200 n/mm2 1200 n/mm2 1200 n/mm2 1300 n/mm2 1300 n/mm2 1300 n/mm2 850 n/mm2 750 n/mm2 900 n/mm2 1100 n/mm2 850 n/mm2 750 n/mm2 1100 n/mm2 100 350 n/mm2 300 1000 n/mm2 300 500 n/mm2 550 800 n/mm2 350 450 n/mm2 500 650 n/mm2 350 450 n/mm2 500 700 n/mm2 350 n/mm2 500 n/mm2 400 n/mm2 400 n/mm2 400 n/mm2 350 n/mm2 700 n/mm2 200 hb 300 hb 300 hb 600 n/mm2 600 n/mm2 material number 1.0037 1.0718 1.0401 1.7131 1.0503 1.0601 1.5131 1.5755 0.9650 1.8504 1.8515 1.3505 1.5026 1.3344 1.2312 1.2343 1.4305 1.4510 1.4034 1.4313 1.4460 1.4301 1.4747 0.6010 0.6030 0.7040 0.7060 0.8035 0.8055 0.8135 0.8155 3.0255 3.0515 3.2152 3.2381 2.0060 2.0240 2.0916 2.0978 2.1247 2.0360 2.0335 material designation material number 1.0570 1.0727 1.0481 1.7015 1.1191 1.1221 1.7030 1.7033 1.6750 1.8507 1.8523 1.3543 1.7176 1.3255 1.2379 1.2767 1.4105 1.4528 1.4116 1.4028 1.4821 1.4571 1.4876 0.6025 0.6045 0.7050 0.7080 0.8045 0.8065 0.8145 0.8170 3.3308 3.1355 3.2373 3.5562 2.0090 2.0265 2.1525 material designation material number 1.0060 1.0757 1.1141 1.5919 1.0535 1.0540 1.7225 1.3565 1.6582 1.8509 1.8550 1.3520 1.7701 1.3294 1.2316 1.2842 1.4107 1.4016 1.4106 1.4104 1.4462 1.4449 1.4825 material designation general construction steel free cutting steel case hardened steel non alloyed alloyed case hardened steel tempering steel non alloyed tempering steel non alloyed tempering steel alloyed a tempering steel alloyed steel castings nitriding steel nitriding steel roller bearing steel spring steel high-speed steel cold working tool steel hot working tool steel steel and sulphured cast stainless steel stainless steel ferritic stainless steel martensitic stainless steel ferritic/martensitic stainless steel austenitic/ferritic stainless steel austenitic heat resistant grey cast iron with lamellar graphite grey cast iron with lamellar graphite spheroidal cast iron r f spheroidal cast iron white cast iron tempered white cast iron tempered black cast iron tempered black cast iron tempered aluminium non alloyed low alloyed aluminium alloys 0.5 si aluminium alloys 0.5-10 si aluminium alloys 10-15 si aluminium alloys 15 si copper non alloyed low alloyed copper wrought alloys special copper alloys special copper alloys special copper alloys short-chipping brass bronze red bronze long-chipping brass thermoplastics duroplastics fibre-reinforced plastics magnesium and magnesium alloys graphite tungsten and tungsten alloys molybdenum and molybdenum alloys pure nickel nickel alloys nickel alloys nickel-chromium alloys nickel and cobalt alloys nickel and cobalt alloys heat resistant alloys nickel-cobalt-chromium alloys pure titanium titanium alloys titanium alloys n 850 n/mm2 3.5200 850 n/mm2 1300 n/mm2 1300 n/mm2 1300 n/mm2 1400 n/mm2 900 n/mm2 700 n/mm2 1200 n/mm2 45 hrc 46 55 hrc 56 60 hrc 61 65 hrc 65 70 hrc s 1.3911 1.3912 2.4360 2.4886 2.4632 2.4654 2.4806 3.7025 3.7114 3.7164 st37-2 9smnpb28 11smnpb30 c15 16mncr5 ec80 c45 c60 50mnsi4 31nicr14 g-x260cr27 34cral6 31crmo12 100cr6 w3 55si7 s 6-5-3 40crmnmos8 6 x38crmov 5 1 x8crnis18 9 x3crti17 x46cr13 x3crni13-4 x8crnimo27 5 x5crni18-10 x80crnisi20 gg10 gg30 ggg40 ggg60 gtw35 gtw55 gts35 gts55 al99,5 almn1 gd-alsi6cu4 g-alsi10mg g-alsi17cu4 e-cu57 cuzn15 cual5 cual11ni6fe5 cube2f125 cuzn40 ms60 cuzn36 ms63 delrin hostalen ferrozell bakelit glass-fibre reinforced m2 mgmn2 c8000 r8500x w-nife densimet w mo mo-50re rni24 ni36 invar s-nicu 30 fe sg-nimo16cr16w nicr20co18ti nicr20co13mo4ti3al hardox 400 sg-nicr20nb inconel 82 ti99,8 tial5sn2 tial5v4 st52-3 45s20 17mn4 13cr3 ec60 ck45 ck60 28cr4 34cr4 gs-20nicrmo3 7 34almo5 39crmov19 3 x192crmo17 55cr3 s 18-1-2-5 x155crvmo12 1 x45nicrmo4 x4crmos18 x105crcomo18 2 x50crmov15 x30cr13 x20crnisi25 4 x6crnimoti17 12 2 x10nicralti32-21 gg25 gg45 ggg50 ggg80 gtw45 gtw65 gts45 gts70 al99,9mg0,5 alcumg2 gd-alsi9mg g-mgal6 g-alsi25cunimg sf-cu cuzn30 cusi3mn st60-2 46spb2 c15e ck15 15crni6 c55 c50 42crmo4 48crmo4 gs-34 crnimo 6 41cralmo7 34 cralni 7 100 crmn 6 w4 51crmov4 pmhs6-5-3-8 asp30 x38crmo16 ramax 90mncrv8 gx8crni12 x6cr17 x2crmosis18-2-1 x14crmos17 x2crnimon22-5-3 duplex x3crnimo18-12-3 gx25crnisi18-9 3.0256 3.3315 3.2134 3.2525 2.1522 2.0321 2.0380 2.1293 3.5612 1.3927 1.3924 2.4610 2.4631 2.4654 1.4939 2.4851 3.7034 3.7174 3.7144 cuzn39pb2 ms58 cucrzr makrolon novodur pertinax carbon-fibre reinforced mgal6zn1 r8650 w-cu80/20 tzc tzm rni8 ni54 nicu 30 fe nimo16cr16ti nicr20tial nicr19co14mo4ti x12crnimo12 nicr23fe inconel 601 ti99,7 tial6v6sn2 tial6sn2zr4mo2 2.0410 2.1080 3.5812 1.3926 1.3921 1.4980 2.4667 3.7064 3.7124 3.7154 e-al h almg1 gd-alsi5cu1mg s-alsi12 g-alsi21cunimg cusl2mn cuzn37 ampco 8-16 ampco 18-26 ampco m-4 cuzn44pb2 cusn6zn6 acrylic glass polystyrol resopal amide-fibre reinforced mgal8zn1 technograph15 w93nife denal mhc ods rni12 ni49 monel 400 hastelloy c-276 nimonic 80 waspaloy x6nicrtimovb25-15-2 sg-nicr19nbmoti ti99,5 ticu2 tial6zr5 h tempered steel 03/18 www.wnt.com

[close]

p. 20

indexable insert drilling cutting data for highfeeddrill cwx1425 hcn1440 220-300 220-300 210-290 210-290 200-280 200-250 180-220 150-200 150-200 150-200 150-200 150-200 150-200 150-200 120-170 120-170 cwk26 Ø Ø Ø 14-15,9 16-17,5 18-21,5 0,14 0,12 0,12 0,12 0,12 0,12 0,10 0,12 0,14 0,12 0,12 0,12 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,06 0,16 0,14 0,14 0,14 0,14 0,14 0,14 0,14 0,08 0,10 0,10 0,10 0,10 0,08 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,16 0,14 0,14 0,14 0,14 0,14 0,12 0,14 0,16 0,14 0,14 0,14 0,10 0,10 0,10 0,10 0,10 0,08 0,08 0,08 0,10 0,08 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,16 0,08 0,12 0,12 0,12 0,12 0,08 0,14 0,14 0,14 0,14 0,14 0,14 0,12 0,18 0,16 0,16 0,16 0,16 0,16 0,14 0,16 0,18 0,16 0,16 0,16 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,10 0,25 0,18 0,18 0,18 0,18 0,18 0,18 0,18 0,10 0,14 0,14 0,14 0,14 0,10 0,16 0,16 0,16 0,16 0,16 0,16 Ø 22-27 0,14 0,25 0,20 0,20 0,20 0,20 0,20 0,18 0,20 0,20 0,20 0,20 0,20 0,14 0,14 0,14 0,14 0,14 0,16 0,16 0,14 0,14 0,12 0,30 0,25 0,20 0,22 0,22 0,22 0,22 0,22 0,12 0,16 0,16 0,20 0,20 0,12 0,25 0,25 0,25 0,25 0,25 0,25 Ø 28 0,14 0,25 0,20 0,20 0,20 0,20 0,20 0,18 0,20 0,20 0,20 0,20 0,20 0,14 0,14 0,14 0,14 0,14 0,16 0,16 0,14 0,14 0,12 0,30 0,25 0,20 0,22 0,22 0,22 0,22 0,22 0,12 0,16 0,16 0,20 0,20 0,12 0,20 0,20 0,20 0,20 0,20 0,20 Ø 29-33 0,14 0,25 0,25 0,25 0,25 0,25 0,22 0,18 0,20 0,20 0,20 0,20 0,20 0,14 0,14 0,14 0,14 0,14 0,16 0,16 0,14 0,14 0,12 0,30 0,25 0,20 0,22 0,22 0,22 0,22 0,22 0,12 0,16 0,16 0,20 0,20 0,12 0,20 0,20 0,20 0,20 0,20 0,20 Ø 34-44 0,14 0,25 0,25 0,25 0,25 0,25 0,22 0,20 0,20 0,20 0,20 0,20 0,20 0,14 0,14 0,14 0,14 0,14 0,20 0,20 0,14 0,12 0,12 0,30 0,25 0,25 0,25 0,25 0,25 0,25 0,24 0,15 0,16 0,16 0,20 0,22 0,15 0,25 0,20 0,20 0,20 0,20 0,20 3 a r 200-300 180-280 140-210 120-200 160-230 120-170 160-230 120-170 200-280 200-280 200-250 180-200 150-180 150-180 150-180 150-180 150-180 150-180 150-180 120-170 120-170 180-220 180-200 180-200 100-140 80-140 150-180 80-140 f n 200-500 200-500 200-500 200-500 200-500 180-240 180-240 180-240 180-240 180-240 180-240 180-240 50-80 100-140 20-80 20-80 20-80 20-80 20-80 20-80 20-80 20-80 40-100 40-80 40-80 s 40-120 40-100 40-100 0,10 0,10 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,12 0,12 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,14 0,14 0,10 0,10 0,10 0,10 0,10 0,10 0,10 0,10 0,10 0,10 0,10 0,16 0,16 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,16 0,16 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,16 0,16 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,16 0,16 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 0,12 h www.wnt.com 03/19

[close]

p. 21

indexable insert drilling copy master for your inquiry for special tools dimension sheet for indexable insert drills please fill in requested dimensions l1 l3 l4 d1 d2 d3 dimensional sketch for individual dimensional drawings and notes material to machine machining axis drilling indexable insert type iso designation shank version Ø through coolant machine type requested quantity pcs yes weldon Ø no whistle notch horizontal into full material vertical standard designation start drilling with pilot hole Ø compatible with abs Ø vdi din 69 880 Ø bar coolant pump pressure pcs pcs company address street post code town customer no if available dept contact your reference contact information and/or fax no can be found in the introduction of this catalogue page 1 03/20 www.wnt.com

[close]

p. 22

indexable insert drilling questionnaire indexable insert drill single-dia 1 dimensions l1 l4 l2 3 l3 2 d2h6 d3 tolerance d1 tolerance 2 3 4 5 material to machine cooling agent supply working axis without thro coolant horizontal standard designation with thro coolant bar coolant pump pressure vertical type of machining through hole basic hole 6 shank type Ø weldon Ø whistle notch Ø compatible with abs Ø vdi din 69 880 7 8 9 10 position on the machine type of machine power output comments e.g lower edges required number of pieces company address dept contact street post code town customer no if known your reference contact information and/or fax no can be found in the introduction of this catalogue page 1 www.wnt.com 03 21

[close]