ecopolimer agglomerates of polyurethane latex and rubber the company since 1999 ecopolimer produces agglomerates of polyurethane foam latex foam and granules rubber in its own firm in trezzo sull adda milan on a covered surface of 1.600 sqm and an open surface of 1.000 sqm the production we are able to complete the whole process of production raw-materials grinding agglomeration with polyurethane bond agents cutting in sizes and thickness on customer require we have produced cow mattresses since 2001 for a total production of 20.000 pieces in over 10 years first eco-bedding mattresses was fitted in a farm near milan at the beginning of 2001 and they are still in regular use our materials in our 10 years experience we have produced cow mattresses in polyurethane latex and foam rubber we can supply agglomerates with different densities and mixtures following customer require mod pur note colour of mattress may be different from pictures mod.latex ecopolimer srl via libero grassi 9/11 i-20056 trezzo sull adda mi tel +39 02 90980270 fax +39 02 90980271 firstname.lastname@example.org www.ecopolimer.it
ecocow mattresses made of polyurethane foam more than 20.000 mattresses since 2001 eco-bedding is a polyurethane foam or polyurethane and latex foam mattress covered with a fabric cover for zootechnical use with high strength and good toughness which allows you to set up a cow stall with all the necessary features to guarantee the comfort and hygiene of the animal eco-bedding has been in production since 2001 with more than 20.000 units produced so far main features softness the mattress has been designed to ensure the right compromise between softness and resistance to loads thus avoiding loss of balance and accidental falls of the animal elasticity thanks to its particular cellular structure the mattress always returns to its original thickness keeping the fabric taut and preventing the formation of holes and depressions and the consequent stagnation of fluids and urine traspiration the mattress with its open cell structure allows air to pass under the animal preventing dangerous irritations to the udders resistance the high quality of the materials and the fastening system guarantee both the resistance and the efficiency of the mattress over time no wonder then that the first mattresses produced and installed in 2001 are still intact thermal insulation the mattress eco-bedding is made of polyurethane foam a thermal insulating material that prevents the cold transferring from the concrete surfaces to the cow s body in winter and the heat transfers in the warmer months hygiene the urine flow on a surface free of depressions allows you to keep the animal always clean and consequently reduces your cleanup and disposal time in addition the particular installation system i.e mats with interlocking system prevents from waste droppings that are typical of individual mats cost reduction in case of wear over the years the top cover is quickly replaceable without having to replace the mattress too this feature significantly reduces the costs of maintaining a bedding in perfect conditions.
eco-bedding product specifications product name eco-bedding mattress composition agglomerate of foam flakes bonded by polyurethane resins mod pur 100 polyurethane foam mod latex 50 polyurethane foam and 50 latex foam 180 kg mc 5 standard dimensions 180 cm other dimensions available on request max length 200 cm max width 100 cm 2 standard thickness between 40 and 50 mm 2 mm other thicknesses available on request density dimensions thickness covers mod 1 transpiring cover material dimensions wire diameter weight thickness air permeability tensil strength elongation 100 pp polypropylene fabric transpiring and uv stabilized rolls height 2,20 m length 30/50/75/150 ml warp yarn 2,5 mm twist weft yarn 3,0 mm tape 900 gr mq 10 3,5 mm 28 l/m²/sec warp 200 10 kn/m weft 150 10 kn/m warp 18 10 weft 16 10 mod 2 waterproof cover material dimensions wire diameter weight thickness air permeability tensil strength elongation installation instructions 100 pp polypropylene fabric waterproof with eco synthetic rubber synthetic polypropylene based and uv stabilized rolls height 2,20 m length 30/50/75/150 ml warp yarn 2,5 mm twist weft yarn 3,0 mm.tape 1.650 gr mq 10 4,5 mm waterproof warp 200 10 kn/m weft 150 10 kn/m warp 18 10 weft 16 10 the eco-bedding installation is very easy and quick 1 roll out the top cover and fasten it to cow platform 2 lay mattress in stall 3 fold top cover over mattress and toward curb 4 fasten top cover to curb with anchors
ecocow mattresses laying instructions eco-bedding consists of polyurethane foam mattress zootechnical cover fabric you need 10 rawplugs for each complete spot recommended inclination of concrete flooring must be 3 at least to allow a regular flow of liquids 1 unroll cover fabric along the line of beddings lay about 20 cm of fabric on the back side of the bedding and remaing part along the lane shift de luxe model fabric must be layed with the rubber side facing up bedding front side back side 20 cm lane shift
2 fix the fabric with rawplugs keeping a distance of 25 cm from each other 25 cm 3 lay mattresses side by side cover all the row of beddings and avoid leaving empty spaces between mattresses
4 cover all mattresses pulling fabric to front side of the bedding front side 5 fix fabric along the front side with a rawplug every 25 cm keep fabric well stretched using a plier fabric will last longer and liquids will flow better along the front side of the bedding you can also fit a strip steel for a better fixing finally fix fabric along the side of the row of beddings with a rawplug every 50 cm beginning side of the row front side
a layer of sawdust on top of fabric keeps cows dry and adds comfort to the bedding.