Cleveland Punch and Die - Edwards Catalog

 

Embed or link this publication

Description

The Cleveland Punch and Die Company - Edwards Tooling

Popular Pages


p. 1



[close]

p. 2



[close]

p. 3

for a-36 and mild steel plate 1/4 up to 1/2 1/2 up to 3/4 3/4 up to 1 1 and over 1/32 clearance 1/16 clearance 3/32 clearance 1/8 clearance 1·800·451·4342 fax 1·800·451·6877 fax 1·800·451·6877 good results are obtained by using the following chart to determine die clearance for more holes per dollar call for more holes per dollar call green team tip www.clevelandpunch.com www.clevelandpunch.com made to order sizes can be shipped in as little as 24 hours made to order sizes can be shipped in as little as 24 hours represents stock round sizes stock round punches figure number figure number stock round dies 55 size 1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32 1/2 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8 29/32 15/16 31/32 1 1-1/32 1-1/16 1-3/32 1-1/8 1-5/32 1-3/16 1-7/32 1-1/4 1-9/32 1-5/16 1-11/32 1-3/8 1-13/32 1-7/16 1-15/32 1-1/2 1-17/32 1-9/16 16 26 the following tables list our stock round punches and dies for edwardstm ironworkers refer to our cross reference catalog for the proper tooling to fit your machine size 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32 1/2 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8 29/32 15/16 31/32 1 1-1/32 1-1/16 1-3/32 1-1/8 1-5/32 1-3/16 1-7/32 1-1/4 1-9/32 1-5/16 1-11/32 1-3/8 1-13/32 1-7/16 1-15/32 1-1/2 1-17/32 1-9/16 1-19/32 1-5/8 62 punches last longer when used with a punch lubricant for maximum punch life use cleveland punch die s patented punch lubricant punch easy green team tip please note we stock 1/32 1/16 clearance die sizes other made to order die sizes such as clearances recommended for gauge stock can be shipped in as little as 24 hours it is the user s responsibility that the machine and tooling be set up and used in accordance with local and national osha laws and ansi b11.5 standards for safety do not permit unqualified personnel to setup or operate the machine extreme care should be used at all times osha warning © cleveland punch die company · 666 pratt street box 769 · ravenna ohio 44266 3 edwd

[close]

p. 4



[close]

p. 5



[close]

p. 6

the following tables list our stock square and hexagon punches and dies for edwardstm ironworkers refer to our cross reference catalog for the proper tooling to fit your machine stock punches dies are shipped the same day ordered made to order sizes can be shipped in as little as 24 hours keyways in head of punch whistle notch locators on dies square and hexagon punches are stocked without keyways in the head dies are stocked without locators they can be furnished on request hexagon punch and die sizes are measured from flat to flat represents stock square sizes represents stock hexagon sizes stock square punches figure number stock square dies figure number stock hexagon punches figure number stock hexagon dies figure number size 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32 1/2 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8 29/32 15/16 31/32 1 1-1/32 1-1/16 1-3/32 1-1/8 16 26 55 62 size 11/32 3/8 13/32 7/16 15/32 1/2 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8 29/32 15/16 31/32 1 1-1/32 1-1/16 1-3/32 1-1/8 1-5/32 1-3/16 1-7/32 1-1/4 1-9/32 1-5/16 16 26 55 62 punch sizes larger than body diameter may require special coupling nut green team tip 6 edwd © cleveland punch die company · 666 pratt street box 769 · ravenna ohio 44266 · 1-800-451-4342 · fax 1-800-451-6877

[close]

p. 7



[close]

p. 8



[close]

Comments

no comments yet