p. 1

[close]

p. 2

before you start the t3 is a high-competition high-quality 1/10-scale touring car intended for persons aged 16 years and older with previous experience building and operating rc model racing cars this is not a toy it is a precision racing model this model racing car is not intended for use by beginners inexperienced customers or by children without direct supervision of a responsible knowledgeable adult if you do not fulfill these requirements please return the kit in unused and unassembled form back to the shop where you have purchased it before building and operating your t3 you must read through all of the operating instructions and instruction manual and fully understand them to get the maximum enjoyment and prevent unnecessary damage read carefully and fully understand the instructions before beginning assembly make sure you review this entire manual the included set-up book and examine all details carefully if for some reason you decide the t3 is not what you wanted or expected do not continue any further your hobby dealer cannot accept your t3 kit for return or exchange after it has been partially or fully assembled contents of the box may differ from pictures in line with our policy of continuous product development the exact specifications of the kit may vary without prior notice we have made every effort to make these instructions as easy to understand as possible however if you have any difficulties problems or questions please do not hesitate to contact the xray support team at info@teamxray.com also please visit our web site at www.teamxray.com to find the latest updates set-up information option parts and many other goodies we pride ourselves on taking excellent care of our customers you can join thousands of xray fans and enthusiasts in our online community at customer support www.teamxray.com xray europe k vystavisku 6992 91101 trencín slovakia europe phone 421-32-7401100 fax 421-32-7401109 e-mail info@teamxray.com xray usa rcamerica 2970 blystone lane suite 109 dallas texas 75220 usa phone 800 519-7221 214 744-2400 fax 214 744-2401 e-mail xray@rcamerica.com failure to follow these instructions will be considered as abuse and/or neglect safety precautions contains lead cas 7439-92-1 antimony cas 7440-36-0 warning this product contains a chemical known to the state of california to cause cancer and birth defects or other reproductive harm caution cancer hazard contains lead a listed carcinogen lead is harmful if ingested wash thoroughly after using do not use product while eating drinking or using tobacco products may cause chronic effects to gastrointestinal tract cns kidneys and blood may cause birth defects when building using and/or operating this model always wear protective glasses and gloves take appropriate safety precautions prior to operating this model you are responsible for this model`s assembly and safe operation please read the instruction manual before building and operating this model and follow all safety precautions always keep the instruction manual at hand for quick reference even after completing the assembly use only genuine and original authentic xray parts for maximum performance using any third party parts on this model will void guaranty immediately improper operation may cause personal and/or property damage xray and its distributors have no control over damage resulting from shipping improper construction or improper usage xray assumes and accepts no responsibility for personal and/or property damages resulting from the use of improper building materials equipment and operations by purchasing any item produced by xray the buyer expressly warrants that he/she is in compliance with all applicable federal state and local laws and regulation regarding the purchase ownership and use of the item the buyer expressly agrees to indemnify and hold harmless xray for all claims resulting directly or indirectly from the purchase ownership or use of the product by the act of assembling or operating this product the user accepts all resulting liability if the buyer is not prepared to accept this liability then he/she should return this kit in new unassembled and unused condition to the place of purchase important notes ­ general · this product is not suitable for children under 16 years of age without the direct supervision of a responsible and knowledgeable adult · carefully read all manufacturers warnings and cautions for any parts used in the construction and use of your model · assemble this kit only in places away from the reach of very small children · first-time builders and users should seek advice from people who have building experience in order to assemble the model correctly and to allow the model to reach its performance potential · exercise care when using tools and sharp instruments · take care when building as some parts may have sharp edges · keep small parts out of reach of small children children must not be allowed to put any parts in their mouth or pull vinyl bag over their head · read and follow instructions supplied with paints and/or cement if used not included in kit · immediately after using your model do not touch equipment on the model such as the motor and speed controller because they generate high temperatures you may seriously burn yourself seriously touching them · follow the operating instructions for the radio equipment at all times · do not put fingers or any objects inside rotating and moving parts as this may cause damage or serious injury as your finger hair clothes etc may get caught · be sure that your operating frequency is clear before turning on or running your model and never share the same frequency with somebody else at the same time ensure that others are aware of the operating frequency you are using and when you are using it · use a transmitter designed for ground use with rc cars make sure that no one else is using the same frequency as yours in your operating area using the same frequency at the same time whether it is driving flying or sailing can cause loss of control of the rc model resulting in a serious accident · always turn on your transmitter before you turn on the receiver in the car always turn off the receiver before turning your transmitter off · keep the wheels of the model off the ground when checking the operation of the radio equipment · disconnect the battery pack before storing your model · when learning to operate your model go to an area that has no obstacles that can damage your model if your model suffers a collision · remove any sand mud dirt grass or water before putting your model away · if the model behaves strangely immediately stop the model check and clear the problem · to prevent any serious personal injury and/or damage to property be responsible when operating all remote controlled models · the model car is not intended for use on public places and roads or areas where its operation can conflict with or disrupt pedestrian or vehicular traffic · because the model car is controlled by radio it is subject to radio interference from many sources that are beyond your control since radio interference can cause momentary loss of control always allow a safety margin in all directions around the model in order to prevent collisions · do not use your model near real cars animals or people that are unaware that an rc car is being driven in places where children and people gather in residential districts and parks in limited indoor spaces in wet conditions in the street in areas where loud noises can disturb others such as hospitals and residential areas at night or anytime your line of sight to the model may be obstructed or impaired in any way to prevent any serious personal injury and/or damage to property please be responsible when operating all remote controlled models 2

[close]

p. 3

important notes ­ electrical · insulate any exposed electrical wiring using heat shrink tubing or electrical tape to prevent dangerous short circuits take maximum care in wiring connecting and insulating cables make sure cables are always connected securely check connectors for if they become loose and if so reconnect them securely never use r/c models with damaged wires a damaged wire is extremely dangerous and can cause short-circuits resulting in fire please have wires repaired at your local hobby shop · low battery power will result in loss of control loss of control can occur due to a weak battery in either the transmitter or the receiver weak running battery may also result in an out of control car if your car`s receiver power is supplied by the running battery stop operation immediately if the car starts to slow down · when not using rc model always disconnect and remove battery · do not disassemble battery or cut battery cables if the running battery shortcircuits approximately 300w of electricity can be discharged leading to fire or burns never disassemble battery or cut battery cables · use a recommended charger for the receiver and transmitter batteries and follow the instructions correctly over-charging incorrect charging or using inferior chargers can cause the batteries to become dangerously hot recharge battery when necessary continual recharging may damage battery and in the worst case could build up heat leading to fire if battery becomes extremely hot during recharging please ask your local hobby shop for check and/or repair and/or replacement regularly check the charger for potential hazards such as damage to the cable plug casing or other defects ensure that any damage is rectified before using the charger again modifying the charger may cause short-circuit or overcharging leading to a serious accident therefore do not modify the charger always unplug charger when recharging is finished do not recharge battery while battery is still warm after use battery retains heat wait until it cools down before charging do not allow any metal part to short circuit the receiver batteries or other electrical/electronic device on the model immediately stop running if your rc model gets wet as may cause short circuit please dispose of batteries responsibly never put batteries into fire · · · · · · r/c building tips · make sure all fasteners are properly tightened check them periodically · make sure that chassis screws do not protrude from the chassis · for the best performance it is very important that great care is taken to ensure the free movement of all parts · clean all ball-bearings so they move very easily and freely · tap or pre-thread the plastic parts when threading screws · self-tapping screws cut threads into the parts when being tightened do not use excessive force when tightening the self-tapping screws because you may strip out the thread in the plastic we recommended you stop tightening a screw when you feel some resistance · ask your local hobby shop for any advice please support your local hobby shop we at xray model racing cars support all local hobby dealers therefore we ask you if at all possible to purchase xray products at your hobby dealer and give them your support like we do if you have difficulty finding xray products please check out www.teamxray.com to get advice or contact us via email at info@teamxray.com or contact the xray distributor in your country warranty xray guarantees this model kit to be free from defects in both material and workmanship within 30 days of purchase the total monetary value under warranty will in no case exceed the cost of the original kit purchased this warranty does not cover any components damaged by use or modification or as a result of wear part or parts missing from this kit must be reported within 30 days of purchase no part or parts will be sent under warranty without proof of purchase should you find a defective or missing part contact the local distributor service and customer support will be provided through local hobby store where you have purchased the kit therefore make sure to purchase any xray products at your local hobby store this model racing car is considered to be a high-performance racing vehicle as such this vehicle will be used in an extreme range of conditions and situations all which may cause premature wear or failure of any component xray has no control over usage of vehicles once they leave the dealer therefore xray can only offer warranty against all manufacturer`s defects in materials workmanship and assembly at point of sale and before use no warranties are expressed or implied that cover damage caused by what is considered normal use or cover or imply how long any model cars components or electronic components will last before requiring replacement due to the high performance level of this model car you will need to periodically maintain and replace consumable components any and all warranty coverage will not cover replacement of any part or component damaged by neglect abuse or improper or unreasonable use this includes but is not limited to damage from crashing chemical and/or water damage excessive moisture improper or no maintenance or user modifications which compromise the integrity of components warranty will not cover components that are considered consumable on rc vehicles xray does not pay nor refund shipping on any component sent to xray or its distributors for warranty xray reserves the right to make the final determination of the warranty status of any component or part limitations of liability xray makes no other warranties expressed or implied xray shall not be liable for any loss injury or damages whether direct indirect special incidental or consequential arising from the use misuse or abuse of this product and/or any product or accessory required to operate this product in no case shall xray`s liability excess the monetary value of this product take adequate safety precautions prior to operating this model you are responsible for this model s assembly and safe operation disregard of the any of the above cautions may lead to accidents personal injury or property damage xray model racing cars assumes no responsibility for any injury damage or misuse of this product during assembly or operation nor any addictions that may arise from the use of this product all rights reserved quality certificate xray model racing cars uses only the highest quality materials the best compounds for molded parts and the most sophisticated manufacturing processes of tqm total quality management we guarantee that all parts of a newlypurchased kit are manufactured with the highest regard to quality however due to the many factors inherent in model racecar competition we cannot guarantee any parts once you start racing the car products which have been worn out abused neglected or improperly operated will not be covered under warranty we wish you enjoyment of this high-quality and high-performance rc car and wish you best success on the track in line with our policy of continuous product development the exact specifications of the kit may vary in the unlikely event of any problems with your new kit you should contact the model shop where you purchased it quoting the part number we do reserve all rights to change any specification without prior notice all rights reserved 3

[close]

p. 4

contents 0 1 2 3 warnings tools and accessories kit gear diff front solid axle central transmission front rear suspension 2-3 4 5 6-8 9-11 12-14 4 5 6 7 7 steering front rear transmission shock absorbers front rear assembly final assembly blank set-up sheet 14-15 16-20 21-23 24-27 28-30 31 symbols used part bags used assemble in the specified order assemble left and right sides the same way pay attention here assemble as many times as specified here twice apply thread lock apply ca glue 05 l=r 2x tl ca apply oil apply grease use pliers ensure smooth non-binding movement tighten screw gently correct wrong follow set-up book oil overtightened the threads are stripped front rear axles tools required hudy tools allen 1.5mm 2.0mm 3.0mm socket 5.5mm 7.0mm 3.0 mm combination pliers hudy #189020 side cutters hudy #189010 hobby knife turnbuckle wrench 3mm hudy #181030 4mm hudy #181040 reamer hudy #107600 or hudy #107601 2.0 mm 1.5 mm 5.5 mm 7.0 mm snap ring pliers hudy #189040 scissors hudy #188990 3.0 mm 4.0 mm equipment included xray premium silicone oil 350cst 359235 oil 700cst 359270 graphite grease hudy #106210 not included to ensure that you always have access to the most up-todate version of the xray set-up book xray will now be offering only the digital online version at our web site at www.teamxray.com by offering this online version instead of including a hardcopy printed version in kits you will always be assured of having the most current updated version equipment required transmitter receiver steering servo electric motor pinion gear and setscrew bearing oil hudy #106230 speed controller 190mm bodyshell lipo battery lexan paint tm battery charger fibre tape hudy #107870 double-sided tape wheels tires inserts 4

[close]

p. 5

color indications 0 kit factory pre-assembled at the beginning of each section is an exploded view of the parts to be assembled there is also a list of all the parts and part numbers that are related to the assembly of that section the part descriptions are color-coded to make it easier for you to identify the source of a part here are what the different colors mean style a indicates parts that are included in the bag marked for the section style b indicates parts that were set aside in section 0 style c indicates parts that are already assembled from previous steps 303022-o 303014-o 303022-o 302027-o 303052-o 301132 903306 302027-o 903306 kit 30 30 30 30 1132 2027-o 3014-o 3022-o t3 12 chassis 2.5mm graphite t3 alu front lower susp adjust bulkhead orange t3 alu right layshaft bulkhead orange t3 alu rear lower susp adjust bulkhead orange 30 3052-o 90 3306 t3 alu motor mount bulkhead orange hex screw sfh m3x6 10 the xray t3 comes partially pre-assembled before starting assembly disassemble the chassis parts noting the position and orientation of the parts particularly the bulkheads keep the parts including the screw hardware close at hand in the assembly steps that follow each section begins with a parts list parts indicated with style b are from the previously disassembled chassis parts in section 0 to protect and seal edges of graphite parts sand edges smooth and then apply ca glue do this for chassis edges filed battery slots countersunk holes ca ca apply only a bit of ca glue on the countersunk holes 5

[close]

p. 6

1 gear differential front solid axle gear differential #304971 optional hudy spring steeltm outdrives 971240 304930 304910 305188 964031 972050 304980 304970 941015 981210 304910 964050 972050 304970 941015 903256 304990 305135 304930 941015 981210 902310 305135 305188 902310 941015 composite solid axle #305136 optional alu solid driveshaft adapters 30 4900 30 4910 30 4930 30 4970 30 4990 30 4980 30 5003 30 5105 30 5135 xray gear differential set composite gear diff case cover composite gear diff bevel satellite gears 2+4 alu gear diff outdrive adapter 7075 t6 2 diff gasket 4 composite gear diff cross pin alu ball differential 34t 38t pulley option xray multi-diff t3 lipo option composite solid axle driveshaft adapters 2 #305137 optional steel solid axle driveshaft adapters 30 5188 90 2310 90 3256 94 1015 96 4031 96 4050 97 1240 97 2050 98 1210 composite solid axle 38t set hex screw sh m3x10 10 hex screw sfh m2.5x6 10 high-speed ball-bearing 10x15x4 rubber sealed 2 washer s 3.5x10x0.2 10 washer s 5x15x0.3 10 silicone o-ring 24x0.7 10 silicone o-ring 5x2 10 pin 2x10 10 bag step detail 964050 s 5x15x0.3 972050 o 5x2 981210 p 2x10 note orientation detail 964050 s 5x15x0.3 step detail use tweezers to insert pin cutaway view 972050 o 5x2 981210 p 2x10 6

[close]

p. 7

1 gear differential front solid axle s 3.5x10x0.2 964031 fill differential up to the top of the diff pin do not fill the diff to the top of the housing to ensure you have the same amount of oil from rebuild to rebuild do the following #107865 hudy ultimate digital pocket scale 300g±0.01g 7.90g 9.20g put the diff without oil on the scale and check the weight approximately 7.90g 7.90g 1.3g 9.20g slowly pour oil into the diff and watch the weight add 1.3g of oil into the diff the approximate weight of the diff oil is 9.20g tips for differentials low-traction 600cst 700cst 800cst note softer oil increases rear traction harder oil increases on-power steering high-traction 900cst 1000cst 2000cst tips for front differential to increase on-power steering and cornering speed the gear diff can also be used in the front note if you use the gear diff in the front we recommend using optional #304971 hudy spring steeltm outdrives because the stress on the outdrives in the front is much higher than in the rear use these oils for front differential 300,000 cst to make the front differential tighter you can use cleaning gum instead of oil important using cleaning gum instead of oil in the gear differential can lead to gear breakage because the gears are working under dry conditions 971240 o 24x0.7 after disassembling the gear diff the large o-ring may have an increased size and may be more difficult to re-install we recommend either inserting the old o-ring carefully in the diff cover or replacing the old o-ring with a new o-ring if the old one cannot be made to fit properly 903256 sfh m2.5x6 detail note orientation detail tighten the screws equally but do not tighten them completely finish tightening in this order 7

[close]

p. 8

1 gear differential front solid axle 941015 bb 10x15x4 composite front solid axle oil bearing oil hudy #106230 902310 sh m3x10 bearing oil hudy #106230 oil 38t pulley 941015 bb 10x15x4 front rear axles #304900 #305003 #305105 #305188 gear differential alu diff 34t 38t pulley xray alu multi-difftm composite solid axle 38t pulley cutaway view front rear axles 8

[close]

p. 9

2 central transmission 940510 305784 981212 965050 305577 303087 902304 305577 940510 302086 902306 305521-k 965050 902306 305446 302028-o 302078 304900 902306 302078 302028-o 903306 902306 302078 305188 303052-o 302069 303014-o 302027-o 903306 303022-o 302046-o 301132 903306 903306 305432 903306 bag 30 2028-o 30 2046-o 30 2069 30 2077 30 2078 30 2086 30 3087 30 5432 30 5446 30 5521-k 30 5577 30 5778 30 5781 30 5784 30 5787 30 5862 30 5866 30 5870 30 5874 30 5876 30 5878 30 5880 t3 alu upper clamp with adj roll-center l+r orange t3 alu lower suspension holder orange t3 composite layshaft bearing support shim 2 set of composite hubs +1mm for bulkheads 4+2 option set of composite hubs for bulkheads 4+2 t3 12 shock tower front graphite 3.0mm t3 12 shock tower rear 3.0mm graphite high-performance kevlar drive belt front 3 x 513 mm high-performance kevlar drive belt rear 3 x 189 mm alu solid layshaft black composite fixed pulley 20t 2 offset spur gear 78t 48 option offset spur gear 81t 48 option spur gear 84t 48 spur gear 87t 48 option offset spur gear 92t 64 option offset spur gear 96t 64 option offset spur gear 100t 64 option offset spur gear 104t 64 option offset spur gear 106t 64 option offset spur gear 108t 64 option offset spur gear 110t 64 option 30 5882 30 5884 30 5886 30 5888 90 2304 90 2306 90 3306 94 0510 96 5050 98 1212 30 4900 30 5188 30 30 30 30 30 90 1132 2027-o 3014-o 3022-o 3052-o 3306 offset spur gear 112t 64 option offset spur gear 114t 64 option offset spur gear 116t 64 option offset spur gear 118t 64 option hex screw sh m3x4 stainless 10 hex screw sh m3x6 10 hex screw sfh m3x6 10 high-speed ball-bearing 5x10x4 rubber sealed 2 e-clip 5 10 pin 2x12 10 xray gear differential set composite solid axle 38t set t3 12 chassis 2.5mm graphite t3 alu front lower susp adjust bulkhead orange t3 alu right layshaft bulkhead orange t3 alu rear lower susp adjust bulkhead orange t3 alu motor mount bulkhead orange hex screw sfh m3x6 10 02 9

[close]

p. 10

2 central transmission optional fine roll-center adjustment optional shims may be used for raising roll center use 3x7 shims with thicknesses between 0.1­0.5mm 903306 sfh m3x6 when tightening the screws push the alu holders gently against screw tightening direction the rear aluminum holders have integrated rear toe-in approximately 1° rear toe-in 1 902304 sh m3x4 2 3 965050 c5 981212 p 2x12 note orientation only when using xray offset spur gears cutaway view spur gears 48p #305778 offset spur gear 78t 48p #305781 offset spur gear 81t 48p #305784 spur gear 84t 48p #305787 spur gear 87t 48p gearing adjustment spur gears 64p #305862 offset spur gear 92t 64p #305866 offset spur gear 96t 64p #305870 offset spur gear 100t 64p #305874 offset spur gear 104t 64p #305876 offset spur gear 106t 64p #305878 offset spur gear 108t 64p #305880 offset spur gear 110t 64p #305882 offset spur gear 112t 64p #305884 offset spur gear 114t 64p #305886 offset spur gear 116t 64p #305888 offset spur gear 118t 64p note orientation 940510 bb 5x10x4 bearing oil hudy #106230 short belt oil long belt oil bearing oil hudy #106230 10

[close]

p. 11

2 central transmission l=r front diff upper position is recommended for tight and technical carpet tracks the upper diff position improves handling in chicanes as it provides more traction increased steering and makes the car easier to drive front belt tension adjustment front diff lower position is recommended for large open asphalt tracks with long sweepers l=r rear diff upper position is recommended for tight and technical carpet tracks the upper diff position improves handling in chicanes as it provides more traction increased steering and makes the car easier to drive rear belt tension adjustment rear diff lower position is recommended for large open asphalt tracks with long sweepers lower diff position lower diff position upper diff position upper diff position ababbaba initial position place tab in this bottom notch to loosen front belt rotate both front nylon hubs in arrow direction a to tighten front belt rotate both front nylon hubs in arrow direction b optional #303071 belt tensioner may be used when the front belt becomes worn and loose initial position place tab in this bottom notch to loosen rear belt rotate both rear nylon hubs in arrow direction a to tighten rear belt rotate both rear nylon hubs in arrow direction b detail upper deck 2x 903306 sfh m3x6 note orientation important tighten the m3x6 screws carefully so the ball-bearing will move freely but without play 902306 sh m3x6 l=r l=r 902306 sh m3x6 11

[close]

p. 12

3 front rear suspension 303134-k 302044 303129 303059-k 302045-o 307314 901408 303129 302033-k 902316 901308 302044 302033-k 903306 903306 303134-k 302047-o 901408 303129 903306 302044 302033-k 902316 902314 303163 302045-o 903306 303134-k 303129 307215 302044 302033-k 30 2033-k 30 2044 30 2045-o 30 2047-o 30 2163 30 2164 30 3059-k 30 3129 30 3134-k 30 3163 30 3164 30 7215 30 7314 902316 901308 302163 90 1308 90 1408 90 2314 90 2316 90 3306 hex screw sb m3x8 10 hex screw sb m4x8 10 hex screw sh m3x14 10 hex screw sh m3x16 10 hex screw sfh m3x6 10 bag 03 alu nut for suspension holder black 2 lower suspension holders 2+2+2 t3 alu lower suspension block orange t3 alu lower front suspension 1-piece holder orange front suspension arm hard 1-hole front suspension arm extra-hard 1-hole option t3 motor bulkhead holder black composite set of wheelbase shims 3x1mm 1x2mm 2 alu shim for lower susp holder 3x7.5x1.5 black 10 rear suspension arm hard 1-hole v2 rear suspension arm extra-hard 1-hole v2 option t2 front suspension pivot pin 2 t2`008 rear suspension pivot pin 2 903306 sfh m3x6 optional fine roll-center adjustment optional shims may be used for raising roll center use 3x7 shims with thicknesses between 0.1­0.5mm 12

[close]

p. 13

3 front rear suspension optional fine roll-center adjustment optional shims may be used for raising roll center use 3x7 shims with thicknesses between 0.1­0.5mm optional fine roll-center adjustment optional shims may be used for raising roll center use 3x7 shims with thicknesses between 0.1­0.5mm 903306 sfh m3x6 l=r rear arms 4x8mm rear left arm 2.0mm rear right arm 901308 sb m3x8 901408 sb m4x8 3x8mm left rear arm completed assembly right rear arm l=r 3mm optional 2-hole rear arms inner position more rear traction outer position more stable use the inner position for initial setting rear anti-roll bar optional rear arms 2-hole #303165 hard h #303166 extra-hard xh rear arms #303163 hard h #303164 extra-hard xh rear downstop adjustment hard arm more rear traction recommended for low medium-traction extra hard arm more steering recommended for high-traction l=r front arms front right arm 2.2mm front left arm completed assembly 901308 sb m3x8 4x8mm 901408 sb m4x8 front left arm front right arm l=r 3mm 3x8mm optional front arms 2-hole #302165 hard h #302166 extra-hard xh front arms #302163 hard h #302164 extra-hard xh front downstop adjustment optional 2-hole front arms inner position more steering outer position more stable use the outer position for initial setting hard arm more steering recommended for low medium-traction extra hard arm more stable easier to drive recommended for high-traction front anti-roll bar 13

[close]

p. 14

3 front rear suspension l=r 303129 shim 3x6x1 it is extremely important that the arms move freely on the pivot pins if they do not use the #107633 hudy arm reamer to slightly resize the holes in the arms thick alu shim 3 x 7.5 x 1.5mm detail 303129 shim 3x6x2 3x16mm thin composite shim 3x6x1mm thick composite shim 3x6x2mm 303134-k shim 3x7.5x1.5 rear left arm detail 3x14mm 902314 sh m3x14 use these suspension holders for initial assembly 50.5 mm toe-in adjustment track-width adjustment wheelbase adjustment roll center adjustment squat adjustment 902316 sh m3x16 2x 1:1 roll center position roll center position roll center position -0.75mm 0mm +0.75mm more traction more on-power push better cornering speed less traction front left arm 303129 shim 3x6x1 l=r 303134-k shim 3x7.5x1.5 detail 0mm 3x16mm thin composite shim 3x6x1mm thick alu shim 3 x 7.5 x 1.5mm 902316 sh m3x16 thin composite shim 3x6x1mm it is extremely important that the arms move freely on the pivot pins if they do not use the #107633 hudy arm reamer to slightly resize the holes in the arms front right arm use these suspension holders for initial assembly 3x16mm detail thick alu shim 3 x 7.5 x 1.5mm 0mm 47.5 mm toe-in adjustment track-width adjustment wheelbase adjustment roll center adjustment squat adjustment roll center position -0.75mm more incorner steering can cause tire overheating roll center position roll center position 0mm +0.75mm less in-corner steering easier to drive 2x l=r 14

[close]

p. 15

4 steering 902306 302661 303129 301193 902306 302652 302612 302654 372503 902305 940508 302526 372503 from servo 930306 302545-o 303129 302653 302663 302612 302663 302663 302612 302663 30 1193 30 2506 30 2526 30 2535 30 2545-o 30 2610 30 2612 30 2652 30 2653 30 2654 t3 12 upper deck 2.0mm graphite xray dual servo saver set composite dual servo saver arm alu steering post for dual servo saver 2 alu steering plate for dual servo saver orange adj turnbuckle m3 l/r 40 mm hudy spring steeltm2 option alu adj turnbuckle m3 l/r 39 mm swiss 7075 t6 2 ball end 5 mm with thread 4mm 2 ball end 4.9mm with thread 6mm 2 ball end 4.9mm with thread 8mm 2 30 2661 30 2663 30 3129 37 2503 90 2305 90 2306 90 3306 90 3308 93 0306 94 0508 940508 302535 903308 903306 bag 04 composite ball joint 4.9mm closed 4 composite ball joint 5 mm open v2 8 composite set of shims 3x1mm 1x2mm 2 composite servo saver x-stiff set hex screw sh m3x5 10 hex screw sh m3x6 10 hex screw sfh m3x6 10 hex screw sfh m3x8 10 ball-bearing 3x6x2.5 2 high-speed ball-bearing 5x8x2.5 rubber sealed 2 65mm 65mm approximately 58mm front toe-in adjustment servo link adjust servo link to fit your servo 2x l=r oil use bearing oil for all bearings 303129 shim 3x6x1 903308 sfh m3x8 to change ackermann angle use 2 identical shims of same thickness between the alu steering plate and ball end 930306 bb 3x6 940508 bb 5x8 tighten the screws lightly but fully and then loosen 1/3 turn so the composite dual servo saver moves freely 3x1mm 1x2mm composite shims 15

[close]