MOTOMARINE 2018

 

Embed or link this publication

Description

SHIP CHANDLER ONLINE SICILY

Popular Pages


p. 1

METS EDITION 2018

[close]

p. 2



[close]

p. 3

ANCHORING MOORING FENDERS BUOYS 1 HARDWARE LOCKS FASTENERS 2 LADDERS GANGWAYS STAFFS SEATS PORT LIGHTS AIR VENTS 3 STOVES REFRIGERATORS TOILETS PLUMBING FITTINGS PUMPS 4 WIPERS HORNS ENERGY ELECTRICAL NAVIGATION LIGHTS 5 GAUGES COMPASSES BINOCULARS ANTENNAS ELECTRONICS 6 SAFETY SPORT CLOTHING HAULAGE TENDERS 7 HARDWARE SAILING COVERS ROPES FLAGS COVERINGS 8 ENGINE SPARES ANODES PROPELLERS FILTERS FUEL TANKS 9 CONTROLS STEERINGS FLAPS TILLERS BOW THRUSTERS 10 LUBRICANTS GLUES DETERGENTS SCRUBS PAINTS BRUSHES 11 PLATES GLASSES DISHES GIFTS AND DECOR HOLDERS 12

[close]

p. 4

ANCHORS / CHAINS 1 / ANCHORING/MOORING/FENDERS BUOYS 1 SHACKLES / CARABINERS / SWIVELS MOORING BOLLARDS / LINE CHOCKS / BOW ROLLERS QUICK WINDLASSES MAXWELL WINDLASSES UNIVERSAL CONTROLS AND WINDLASS SPARE PARTS ROPES & MOORING MOORING BUOYS / FENDERS BUMPERS / PROTECTION GUARDS / FENDERING PROFILES 2

[close]

p. 5

ANCHORS / CHAINS FLOATING ANCHORS AND STABILIZERS Rocker Stopper Stabilizer Handy, lightweight and easy to use hydrodynamic stabilizer. Avoids rolling and stabilizes the boat, can be used also for slowing drift. Ideal for anchored or moored boats and for floating pontoons. Number of stoppers needed on each side of the boat: 3 up to 8 meters 4 up to 11 meters 5 up to 13 meters 8 up to 15 meters Cod. 3275002 ø cm UM € 36 PCS Floating Anchors Reinforced Polyester drift floating anchor with strong tape straps. Works on the parachute principle that takes advantage of water friction and stabilizes the boat, keeps the bow up to the wind and avoids drifting. The recommended rope should be at least 3 times the length of the boat. Cod. 3271004 3271005 3271010 3271015 ø cm 45 60 100 150 L cm Boat m UM € 65 < 6 PCS 80 < 8 PCS 150 < 11 PCS 220 < 13 PCS Top Drag Drogue Sea Anchors PVC coated Rip-Stop Nylon H.Duty drift floating anchor. Nylon tape straps and reinforcements. Works with the parachute principle that take advantage of water friction and stabilizes the boat, keeps the bow up to the wind and avoids drifting. The recommended rope should be at least 3 times the length of the boat. Cod. 3271206 3271208 3271210 3271213 ø cm 60 80 107 135 L cm Boat m UM € 53 < 6 PCS 70 < 8 PCS 110 < 10 PCS 140 < 12 PCS Sea-Drag Anchors High efficiency braking action drogue anchor (50% more than other traditional drogue anchors) thanks to the double chamber with side openings. Heavy duty Oxford Rip-Stop Nylon with stainless steel fittings and Nylon tape straps and reinforcements. Used as drogue anchor to avoid drifting and keep the keel up to the wind, as drift anchor, as stabilizers or as brake. The recommended rope should be at least 3 times the length of the boat. Cod. 3271021 3271022 3271023 3271024 ø cm 60 73 120 150 L cm Boat m Boat ‘ UM € 122 < 11 24-36 PCS 156 < 17 36-55 PCS 191 < 23 55-75 PCS 224 < 29 75-95 PCS Sea Guardians Para Sea Anchors Sea Guardians Para-Anchor floating anchors for use in fishing, commercial navigation and pleasurecrafts. They work with the parachute principle for a formidable brake in the water. Made of 100% Nylon fabric for exceptional durability and performance in all sea conditions. Light and extremely robust, they are used as anchor, drift or brake in open and deep waters, guaranteeing great stability and safety. The recommended rope should at least be 3 times the length of the boat. Cod. 3271108 3271112 3271116 3271120 ø cm 260 380 510 640 Boat Length m <9 < 12 < 14 < 18 UM PCS PCS PCS PCS € ANCHORING / DOCKING / MOORING 1 3

[close]

p. 6

ANCHORS / CHAINS ANCHORS Fortress Marine Anchor Ultralight hardened high-tech Aluminum-Magnesium alloy Fortress anchor. Perfect for motorboats, inflatables and used as a secondary anchor on large vessels. Adjustable fluke angles: 32° for sand - 45° for soft mud. Hardened high-tech Aluminum-Magnesium alloy Fortress anchor weighs less than a third as 1 much as a steel anchor, with a 100% better holding power due to its design. Disassembles for easy storage. Perfect when used as a picnic anchor. Adjustable fluke angles for better holding power: 32° standard position - 45° soft mud position. ANCHORING / DOCKING / MOORING Cod. Ref Fortress Kg 0108003 FX-11 3.0 0108005 FX-16 4.5 0108007 FX-23 6.8 0108010 FX-37 9.5 0108015 FX-55 14.5 0108022 FX-85 21.4 0108031 FX-125 31.0 L mm 680 780 900 1000 1160 1285 1410 W mm Holding Power Kg Boat m UM 550 1650 < 9.90 m PCS 630 2250 < 11.60 m PCS 730 3600 < 14.60 m PCS 800 5400 < 15.50 m PCS 935 7200 < 17.70 m PCS 1035 9500 < 21.00 m PCS 1135 12200 < 28.00 m PCS € Pool HHP Anchor Galvanized Steel Pool HHP (High Holding Power) anchor. For: sand - mud. Cod. 0104812 0104820 0104840 0104860 0104880 0104890 0104895 L mm 448 533 662 762 840 905 1050 W mm 323 386 479 550 608 653 760 Kg 12 20 40 60 80 100 150 UM PCS PCS PCS PCS PCS PCS PCS € Hall Anchor Galvanized Steel compact “heavy” anchor. For: sand - mud. Cod. 0104518 0104528 0104536 0104548 0104558 0104610 0104615 L mm 386 445 505 555 585 831 1048 W mm 325 380 420 450 500 584 670 Kg UM € 18 PCS 27 PCS 35 PCS 48 PCS 58 PCS 100 PCS 150 PCS 4

[close]

p. 7

ANCHORS / CHAINS ANCHORS Folding Grapnel Anchor Galvanized Steel folding grapnel anchor. For: rocks - stones - sand. Often used as a secondary anchor. Cod. 0104015 0104025 0104032 0104040 0104060 0104080 0104110 L mm 310 360 400 450 545 580 655 W mm 290 330 350 400 465 540 595 Stainless Steel Folding Grapnel Anchor Stainless Steel folding grapnel anchor. For: rocks - stones - sand. Often used as a secondary anchor. Cod. 0104115 0104125 0104132 0104140 0104160 L mm 310 360 400 450 545 W mm 290 330 350 400 465 D mm 80 85 95 105 120 130 130 D mm 80 85 95 105 120 Kg UM 1,5 PCS 2,5 PCS 3,2 PCS 4 PCS 6 PCS 8 PCS 10 PCS € Kg UM 1,5 PCS 2,5 PCS 3,2 PCS 4 PCS 6 PCS € Fisherman Anchor Folding Arms Galvanized Steel folding fluke traditional anchor. For: rocks - stones - sand. Often used as a secondary anchor. Cod. 0106505 0106510 0106515 0106520 0106525 L mm 520 660 755 800 820 W mm 350 515 595 570 640 C mm 470 575 655 740 820 D mm 110 160 190 190 208 Kg UM 5 PCS 10 PCS 15 PCS 20 PCS 25 PCS € Hall Anchor Compact Galvanized Steel compact anchor. For: sand - mud. Often used as a secondary anchor. Cod. 0104503 0104504 0104506 0104508 0104510 L mm 310 325 385 495 495 W mm 160 185 205 230 245 Kg UM € 2,8 PCS 3,7 PCS 6,3 PCS 8 PCS 10 PCS Danforth Type Anchor Galvanized Steel “Danforth” type traditional anchor. For: sand - mud. Cod. 0105004 0105006 0105008 0105010 0105012 0105015 0105020 0105025 0105030 0105040 0105050 L mm 540 520 685 700 720 740 760 770 820 840 860 W mm 400 460 510 510 520 610 660 660 700 710 750 Kg UM € 4 PCS 6 PCS 8 PCS 10 PCS 12 PCS 15 PCS 20 PCS 25 PCS 30 PCS 40 PCS 50 PCS ANCHORING / DOCKING / MOORING 1 5

[close]

p. 8

ANCHORS / CHAINS ANCHORS Bruce Type Anchor Galvanized Steel 3 pointer “Bruce” type anchor. For: sand - mud. Cod. H mm L mm W mm 1 0107502 190 350 295 0107505 240 470 330 0107507 265 530 380 0107510 285 560 395 0107515 315 620 405 0107520 370 686 470 0107530 445 800 525 0107550 470 980 660 Kg UM 2 PCS 5 PCS 7,5 PCS 10 PCS 15 PCS 20 PCS 30 PCS 50 PCS € ANCHORING / DOCKING / MOORING Bruce S/Steel Type Anchor Mirror-polished Stainless Steel AISI 316 3 pointer “Bruce” type anchor. For: sand - mud. Cod. H mm L mm W mm 0107602 190 350 230 0107605 210 465 315 0107607 280 530 360 0107610 295 580 410 0107615 340 655 435 0107620 350 670 460 0107630 410 815 560 0107650 470 980 660 Kg UM 2 PCS 5 PCS 7,5 PCS 10 PCS 15 PCS 20 PCS 30 PCS 50 PCS € Toro Anchor Galvanized Steel quick penetrating anchor. For: sand - mud. Cod. 0108704 0108706 0108710 0108716 0108720 0108725 0108732 0108740 L mm 515 595 695 810 880 940 1050 1100 W mm 230 265 310 360 390 415 435 490 Kg 4 6 10 16 20 25 32 40 Motor Boats <6,5 m <8,7 m <11,6 m <15 m <16 m <18 m <20 m <21,5 m Sailing Boats UM <6 m PCS <7,8 m PCS <10 m PCS <13 m PCS <14,5 m PCS <16 m PCS <17,5 m PCS <19 m PCS € Toro S/Steel Anchor Stainless Steel AISI 316 quick penetrating anchor. For: sand - mud. Cod. L mm W mm 0108804 515 230 0108806 595 265 0108810 695 310 0108816 810 360 0108820 880 390 0108825 940 415 0108832 1050 435 0108840 1100 490 Kg 4 6 10 16 20 25 32 40 Motor Boats <6,5 m <8,7 m <11,6 m <15 m <16 m <18 m <20 m <21,5 m Sailing Boats <6 m <7,8 m <10 m <13 m <14,5 m <16 m <17,5 m <19 m UM PCS PCS PCS PCS PCS PCS PCS PCS € 6

[close]

p. 9

ANCHORS / CHAINS PERFORMANCE ANCHORS Galvanized Steel Rocna Anchor Cod. L mm W mm Kg Boat m UM € Special Galvanized Steel quick grasp Rocna anchor for any type of seabed ideal for any boat size and for megayachts. The roll-bar and the weight distribution of the anchor both ensures the optimum penetration angle, while the large concave blade gives the greatest coefficient of resistance thus the result is a massive holding power. R.I.Na. Certificate and heavier 110/150/200/250 Kg anchors available on request. 0101004 0101006 0101010 0101015 0101020 0101025 547 630 724 830 864 971 275 315 365 415 435 485 4 <6 m PCS 6 <8 m PCS 10 <11 m PCS 15 <12 m PCS 20 <14 m PCS 25 <16 m PCS 1 - Finds quickly best position - Best sea floor penetration - Best hold at any condition - High quality resistance 0101033 0101040 0101055 0101070 1066 1142 1235 1338 532 570 620 670 33 <20 m PCS 40 <22 m PCS 55 <26 m PCS 70 <30 m PCS - Rotates in place without pop-out - Roll-bar ensures that anchor lands always on ideal angle ANCHORING / DOCKING / MOORING Vulcan Anchor Galvanized Steel quick grasp Vulcan anchor for any type of seabed, for small to big powerboats and for yachts. With high resistance fluke geometry shank and snug fit on any type of bow thanks to the omision of the roll-bar. The innovative Roll-Palm ensures anchor landing on the ideal angle of penetration, while the V-bulb extends fluke ballast downward to gain maximum leverage and efficiency, granting more holding power. - Finds quickly best position - Great and secure holding grip - Maximum traction and efficiency at any condition - High resistance thanks to optimized geometry - Self-launching, easy to use and set - Perfect setting and snug fit on any type of bow Cod. 0101206 0101209 0101212 0101215 0101220 0101225 0101233 0101240 0101255 L mm 541 619 681 734 808 870 955 1018 1132 W mm 296 339 373 402 442 476 522 557 619 Kg Boat m UM € 6 <8 m PCS 9 <10 m PCS 12 <11 m PCS 15 <12 m PCS 20 <14 m PCS 25 <16 m PCS 33 <20 m PCS 40 <22 m PCS 55 <26 m PCS Galvanized Steel Spade Anchor Very high load resistance special Galvanized Steel Spade anchor with unique concave surface that allows to lands the right way up every single time. Center of mass has been positioned at a very low level in order to prevent the anchor to trip under load or stress. The total weight of the anchor is applied directly onto the sharp tip which grants immediate penetration. Weight distribution is used to ensure the optimum angle for passive penetration. Once a load is applied to the rode, the anchor adopts the best position for penetration and it’s sharp point will penetrate most harder seabeds with ease. The large concave blade gives the greatest coefficient of resistance thus the result is a massive holding power, about 40% greater of other competitors. Usually the hold of anchors is cyclical as they dig in and release again. The Spade anchor remains buried without cyclic behaviour instead. - Finds immediately the right position - Immediate penetration - Spade anchor never gives up - Pivots within the bottom and keeps holding - It doesn’t tangle to it’s chain - It offers constant and maximum resistance - Massive holding power - Works also with a low chain-length - Dismantable shank for easy storing Cod. Ref H mm L mm 0109110 S60 250 695 0109115 S80 285 770 0109120 S100 330 880 0109125 S120 380 960 0109130 S140 370 1050 0109135 S160 420 1120 0109145 S180 425 1180 0109155 S200 500 1200 0109175 SQ240 580 1405 Kg 9.5 15 20 25 30 35 45 55 75 Boat m < 7.5 m < 12.5 m < 16 m < 18 m < 20 m < 23 m < 23 m < 25 m < 30 m Boat Weight < 2 Ton < 6.5 Ton < 12 Ton < 16 Ton < 20 Ton < 23 Ton < 26 Ton < 30 Ton < 35 Ton UM PCS PCS PCS PCS PCS PCS PCS PCS PCS € 7

[close]

p. 10

ANCHORS / CHAINS PERFORMANCE ANCHORS Stainless Steel Spade Anchor Cod. Ref H mm L mm Kg Boat m 1 Very high load resistance special Stainless Steel Spade anchor with unique concave surface that allows to land the right way up every single time. Center of mass has been positioned at a very low level in order to prevent the anchor to trip under load or stress. The total weight of the anchor is applied directly onto the sharp tip which grants immediate penetration. Weight distribution is used to ensure the optimum angle for passive penetration. Once a load is applied to the rode, the anchor adopts the best position for penetration and its sharp point will easily penetrate the harderst seabeds. The large concave surface gives a safe holding power, about 40% higher than other competitors. 0109210 0109215 0109220 0109225 0109230 0109235 0109245 0109255 0109275 X60 X80 X100 X120 X140 X160 X180 X200 XHR240 250 695 9.5 285 770 15 330 880 20 380 960 25 370 1050 30 420 1120 35 425 1180 45 500 1200 55 580 1405 75 < 7,5 m < 12,5 m < 16 m < 18 m < 20 m < 23 m < 23 m < 25 m < 30 m Usually the hold of anchors is cyclical as they dig in and release again. The Spade anchor remains buried without cyclic behaviour instead. ANCHORING / DOCKING / MOORING - Finds immediately the right position - Immediate penetration - Spade anchor never gives up - Pivots within the bottom and keeps holding - It doesn’t tangle to its chain - It offers constant and maximum resistance - Massive holding power - Works also with a low chain-length - Dismantable shank for easy storing Boat Weight < 2 Ton < 6.5 Ton < 12 Ton < 16 Ton < 20 Ton < 23 Ton < 26 Ton < 30 Ton < 35 Ton UM PCS PCS PCS PCS PCS PCS PCS PCS PCS € Stainless Steel Rocna Anchor Cod. L mm W mm Kg Boat m UM € Special Stainless Steel quick grasp Rocna anchor for any type of seabed ideal for any boat 0101510 724 365 10 <11 m PCS size and for megayachts. 0101515 830 415 15 <12 m PCS The roll-bar and the weight distribution of the anchor both ensures the optimum penetration angle, while the large concave blade gives the greatest coefficient of resistance thus the result is a massive holding power. R.I.Na. Certificate and heavier 110/150/200/250 Kg anchors available on request. 0101520 0101525 0101533 0101540 864 971 1066 1142 435 485 532 570 20 <14 m PCS 25 <16 m PCS 33 <20 m PCS 40 <22 m PCS - Finds quickly best position - Best sea floor penetration 0101555 0101570 1235 1338 620 670 55 <26 m PCS 70 <30 m PCS - Best hold at any condition - High quality resistance - Rotates in place without pop-out - Roll-bar ensures that anchor lands always on ideal angle ANCHORS / CHAINS ANCHOR TO CHAIN CONNECTORS SiderMarine Anchor Connector SiderMarine anchor connector for complete safety to the boat and to the crew. Ideal for performance anchors and G70 chains with high breaking loads. The connectors working load overtakes the 50% of the value of the breaking load! - Forged Stainless Steel body with Stainless Steel 17-4-PH self-locking pins - Extreme high resistance to traction load and bend load - Easy to inspect to avoid corrosion and breakage (common in other anchor connectors) Cod. For D mm Chain BL Kg A mm B mm C mm G mm D mm D1 mm L mm UM 0123232 8 6500 13 21 22 15 8 10 122 PCS 0123233 10/12 8500 13 21 22 15 10 10 122 PCS 0123234 12/14 12500 15 27 28 16 12 14 140 PCS 0123236 16/22 40000 29 45 65 37 25 35 310 PCS € 8

[close]

p. 11

ANCHORS / CHAINS ANCHOR TO CHAIN CONNECTORS Swivel Anchor Connector Stainless Steel swivel connector. It slides smoothly over anchor rollers, while preventing snagging of the chain. Cod. For Chain D mm A mm B mm C mm D mm D1 mm L mm UM 0123008 6/8 10 15 22 7 10 92 PCS 0123010 10 12 18 26 11 11 115 PCS 0123012 10/12 13 22 28 11 11 120 PCS 0123013 12/14 18 28 32 14 16 140 PCS € Douglas Swivel Anchor Connector High resistance Stainless Steel swivel connector. It slides smoothly over anchor rollers, while preventing snagging of the chain. With safety for pin fixing. 0123308 for anchors from 5 to 15 Kg 0123312 for anchors from 10 to 15 Kg Cod. 0123308 0123312 For D mm Chain BL Kg A mm B mm C mm D mm D1 mm L mm UM 6/8 2800 10 16 20 8 10 90 PCS 10/12 7200 13 22 27 12 12 115 PCS € Douglas HD Swivel Anchor Connector High resistance Stainless Steel swivel connector. It slides smoothly over anchor rollers, while preventing chain snagging. With pin fixing safety and reinforced anti-torsion anchor bracket. 0123309 for anchors from 7 to 18 Kg 0123313 for anchors from 20 to 30 Kg 0123314 for anchors from 30 to 50 Kg Cod. 0123309 0123313 0123314 For D mm Chain 6/8 10/12 10/12 BL Kg A mm B mm C mm D mm D1 mm L mm UM 3200 10 16 30 8 10 92 PCS 7800 15 22 30 12 13 117 PCS 10800 15 27 37 12 15 122 PCS € Double Swivel Anchor Connector Stainless Steel double swivel connector. It slides smoothly over anchor rollers, while preventing snagging of the chain. It allows to set the anchor properly in the bow roller. Cod. 0133418 0133422 For D mm Chain 6/8 10 A mm B mm C mm D mm D1 mm L mm UM 10 15 20 7 9 120 PCS 13 18 28 10 10 160 PCS € TrimFix Anchor Connector TrimFix Stainless Steel anchor long swivel connector. It runs in the bow anchor without stalling, prevents chain tangling. It allows to perfectly pull and store anchors into the bow rollers. Cod. 0133438 0133440 For D mm Chain 6/8 10/12 A mm 10 14 B mm 11 x 21 14 x 27 D mm 8 12 L mm 225 310 UM PCS PCS € Trimmer H.D. Anchor Connector Douglas type Stainless Steel anchor double-swivel head and fork connector. It runs in the bow anchor without stalling, prevents chain tangling. It allows to perfectly pull and store anchors into the bow rollers. No extra shackles needed to connect the anchors. 0133428 for anchors from 7 to 16 Kg 0133432 for anchors from 20 to 30 Kg 0133433 for anchors from 30 to 50 Kg Cod. 0133428 0133432 0133433 For D mm Chain 6/8 10/12 10/12 BL Kg A mm B mm C mm D mm D1 mm L mm UM 3200 10 16 27 8 10 200 PCS 7800 16 22 32 12 13 240 PCS 10800 16 27 36 12 15 250 PCS € ANCHORING / DOCKING / MOORING 1 9

[close]

p. 12

ANCHORING / DOCKING / MOORING ANCHORS / CHAINS GALVANIZED STEEL CHAINS Calibrated Galvanized Steel Chain Controlled breaking load high quality calibrated Hot-dip Galvanized Steel chain. Bundle: 30,50,75 or 100 meters. 1 G40 Cod. D mm L mm W mm 011000630 6 18,5 8 011000650 6 18,5 8 011000675 6 18,5 8 0110006100 6 18,5 8 011000730 7 22 9 011000750 7 22 9 011000775 7 22 9 0110007100 7 22 9 011000830 8 24 10 011000850 8 24 10 011000875 8 24 10 0110008100 8 24 10 011001030 10 28 14 011001050 10 28 14 011001075 10 28 14 0110010100 10 28 14 011001130 10 30 15 011001150 10 30 15 011001175 10 30 15 0110011100 10 30 15 011001250 12 36 16 011001275 12 36 16 0110012100 12 36 16 011001375 13 36 18 0110013100 13 36 18 011001675 16 45 22 0110016100 16 45 22 Breaking Load Kg 2000 2000 2000 2000 3000 3000 3000 3000 4000 4000 4000 4000 6500 6500 6500 6500 6500 6500 6500 6500 9000 9000 9000 11000 11000 17000 17000 Kg 24 40 60 80 33 55 82,5 110 43,5 72,5 108,75 145 72 120 180 240 69 115 172,5 230 165 247,5 330 300 400 442,5 590 L meters 30 50 75 100 30 50 75 100 30 50 75 100 30 50 75 100 30 50 75 100 50 75 100 75 100 75 100 UM PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK € Calibrated G70 Galvanized Steel Chain High resistance G70 superior quality hot-dip Galvanized Steel chain for windlasses. Production controlled minimum breaking load. Bundle: 30, 50, 75 or 100 meters. Cod. 011070830 011070850 011070875 0110708100 011071050 011071075 0110710100 011071150 011071175 0110711100 011071250 011071275 0110712100 D mm 8 8 8 8 10 10 10 10 10 10 12 12 12 L mm W mm 24 10 24 10 24 10 24 10 28 14 28 14 28 14 30 15 30 15 30 15 36 16 36 16 36 16 Breaking Load Kg 6000 6000 6000 6000 9500 9500 9500 9500 9500 9500 13290 13290 13290 Kg 43,5 72,5 108,75 145 120 180 240 115 172,50 230 165 247,50 330 L meters 30 50 75 100 50 75 100 50 75 100 50 75 100 UM PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK € G70 Long Link Galvanized Steel Chain Cod. D mm L mm W mm Breaking Load Kg Kg L meters UM Controlled high quality long link hot-dip Galvanized Steel 011100650 6 23 11 1650 37,5 50 PCK chain. 011100850 8 32,3 14 3200 67,5 50 PCK Bundle: 50 meters. 011101050 10 40 17 5000 110 50 PCK 011101250 12 49 22 7000 155 50 PCK 011101450 14 56 22 9200 205 50 PCK 011101650 16 56 23 12500 295 50 PCK 011101850 18 63,5 28,1 16000 335 50 PCK 011102250 22 80,1 34,2 20000 430 50 PCK 011102850 28 98,8 41,9 36000 845 50 PCK 011103050 30 105 46,4 41500 910 50 PCK € 10

[close]

p. 13

ANCHORING / DOCKING / MOORING ANCHORS / CHAINS STAINLESS STEEL CHAINS Calibrated Stainless Steel Chain Controlled breaking load high quality calibrated Stainless Steel 316 chain. Bundle: 30,50,75 or 100 meters. G40 Cod. D mm L mm W mm 011500615 6 18,5 8 011500630 6 18,5 8 011500650 6 18,5 8 011500675 6 18,5 8 011500715 7 22 9 011500730 7 22 9 011500750 7 22 9 011500775 7 22 9 011500815 8 24 10 011500830 8 24 10 011500850 8 24 10 011500875 8 24 10 0115008100 8 24 10 011501015 10 28 14 011501030 10 28 14 011501050 10 28 14 011501075 10 28 14 0115010100 10 28 14 011501115 10 30 15 011501130 10 30 15 011501150 10 30 15 011501175 10 30 15 0115011100 10 30 15 011501215 12 36 16 011501250 12 36 16 011501275 12 36 16 0115012100 12 36 16 011501315 13 36 18 011501350 13 36 18 011501375 13 36 18 0115013100 13 36 18 Breaking Load Kg 1600 1600 1600 1600 2500 2500 2500 2500 3200 3200 3200 3200 3200 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 7240 7240 7240 7240 8000 8000 8000 8000 Kg 11,3 22,5 37,5 56,25 15,8 31,5 52,5 78,8 21 42 70 105 140 34,5 69 115 172,5 230 33,8 67,5 112,5 168,8 225 48 160 240 320 58,5 195 292,5 390 L meters 15 30 50 75 15 30 50 75 15 30 50 75 100 15 30 50 75 100 15 30 50 75 100 15 50 75 100 15 50 75 100 UM PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK PCK € 1 Long Link Stainless Steel Chain Cod. D mm L mm W mm Kg L meters UM € Long link Stainless Steel 316 chain in 50 and 25 meters 011520250 2 22,1 6 3 50 PCK coils. 011520350 3 26 6,1 4,5 50 PCK 011520425 4 32,2 7,6 6,75 25 PCK 011520525 5 35 10 10,75 25 PCK Stainless Steel Chain Segments High quality Stainless Steel long link chain segments. Cod. 011520602 011520605 011520802 011520805 011521002 011521005 011521202 011521205 D mm 6 6 8 8 10 10 12 12 L meters 2 5 2 5 2 5 2 5 UM PCS PCS PCS PCS PCS PCS PCS PCS € 11

[close]

p. 14

ANCHORS / CHAINS ANCHORS / CHAINS ACCESSORIES AllenHead Shackle Stainless Steel Connecting Links 8P Stainless Steel Connecting Links Stainless Steel allenhead shackle. Stainless Steel connecting links for the connection of chain High breaking load 8-pin Stainless Steel connecting links. Usually used as junction between chain and anchor. segments. For calibrated chains. The non captive pin allows easy sliding thru the bow roller. Cod. D mm L mm W mm UM € Cod. D mm L mm W mm UM € 1 Cod. D mm L mm W mm UM 0122706 6 20 12 PCS € 0112906 6 0112908 8 20 10 PCS 24 12 PCS 0122708 8 28 16 PCS 0112910 10 28 14 PCS 0122710 10 35 20 PCS 0112912 12 36 18 PCS 0112926 6 20 9 PCS 0112928 8 24 12 PCS 0112930 10 28 14 PCS 0112932 12 36 18 PCS 0122712 12 42 24 PCS ANCHORING / DOCKING / MOORING Chain Marker Coloured Plastic markers. To be set onto the links, to display the exact length of the chain laid. Cod. 0112856BL 0112856GN 0112856RD 0112856WH 0112856YE 0112858BL 0112858GN 0112858RD 0112858WH 0112858YE For Chain Colour Pcs UM ø mm 6 BLUE 14 PCK 6 GREEN 14 PCK 6 RED 14 PCK 6 WHITE 14 PCK 6 YELLOW 14 PCK 8 BLUE 10 PCK 8 GREEN 10 PCK 8 RED 10 PCK 8 WHITE 10 PCK 8 YELLOW 10 PCK € Cod. For Chain Colour Pcs UM ø mm 0112860BL 10 BLUE 8 PCK 0112860GN 10 GREEN 8 PCK 0112860RD 10 RED 8 PCK 0112860WH 10 WHITE 8 PCK 0112860YE 10 YELLOW 8 PCK 0112862BL 12 BLUE 6 PCK 0112862GN 12 GREEN 6 PCK 0112862RD 12 RED 6 PCK 0112862WH 12 WHITE 6 PCK 0112862YE 12 YELLOW 6 PCK € Stainless Steel Chain Boy Stainless Steel Chain Boy chain distributor. To be installed in the chain peak box, it lays the chain properly without tangling. Endowed with 50-75-100 mm sections to build different modular (325-375-400-425-450-475 mm) height. (325 mm is minimum base height). Cod. 1135520 UM PCS € Stainless Steel Chain Stopper Stainless Steel chain stopper which keeps anchor and chain stopped when weighed. It takes tension off your windlass extending his life, allows also to weigh another anchor or to use the windlass as a capstan. Cod. 1136006 1136010 For Chain D mm 6/8 8/10 UM PCS PCS € Deck Pipe L type Chromed Bronze deck pipe. Cod. 1135502 For Chain mm 6 Overall ø mm 155 Inner Dia ø mm UM 125 PCS Deck Pipe S type Chromed Bronze compact deck pipe. Height 35 mm. € Cod. For Chain mm 1135500 6 Overall ø mm 82 Inner Dia ø mm UM 40 PCS € 12

[close]

p. 15

ANCHORING / DOCKING / MOORING ANCHORS / CHAINS ANCHORS / CHAINS ACCESSORIES Stainless Steel Chain Clover Forged Stainless Steel anchor chain stopper preserves from shocks and bumps the windlass while anchoring, eliminating the transmission of annoying vibrations of the rolling anchored boat. It avoids the chain from stepping over the gypsy. Cod. 0133506 0133510 For Chain ø mm 6/8 10/12 UM PCS PCS € Stainless Steel Chain Lock Stainless Steel anchor chain stopper preserves from shocks and bumps the windlass while anchoring, eliminating the transmission of annoying vibrations of the rolling anchored boat. It avoids the chain from stepping over the gypsy. Cod. 0133518 0133520 For Chain ø mm 6/8 10/12 UM PCS PCS € 1 Hook Anchor Saver Galvanized Carbon Steel hook anchor saver. Perfect to retrieve blocked anchors, releasing them from twisted lines or chains. Cod. 0133602 UM PCS S/Steel Hook Anchor Saver Mirror polished Stainless Steel hook anchor saver. Perfect to retrieve blocked anchors, releasing them from twisted lines or chains. € Cod. 0133603 UM PCS € Galvanized Steel Chain Segments High quality hot dip Galvanized Steel long link chain segments. Cod. D mm L meters 011100602 6 2 011100605 6 5 011100802 8 2 011100805 8 5 011101002 10 2 011101005 10 5 011101202 12 2 011101205 12 5 ANCHORS / CHAINS ROPE CHAIN SYSTEMS Mooring System Kit 1 Anchor Rope/Chain kit, including 30 m line, complete with thimble, 2 m Hot-dip Galvanized Steel chain and 2 shackles. UM PCS PCS PCS PCS PCS PCS PCS PCS Cod. 3104108 3104110 30 Meters Line ø 8 mm ø 10 mm 2 Meters Chain ø 6 mm ø 8 mm Shackles 2 2 Weight Kg UM 3,2 PCK 4,4 PCK € € Anchor-Rode Slim Splice Calibrated chain and top quality 3-strand Polyester rope spliced for windlasses. Perfect connection system between rope and chain with slimmer and more tapered splice preventing the jamming on the gypsy. Cod. 3104126 3104138 Line + Chain Pack UM € 40 meters 12,7mm (1/2”) line + 10 meters 6mm chain PCK 292.00 60 meters 14,2mm (9/16”) line + 7,6 meters 8mm chain PCK 307.50 13

[close]

Comments

no comments yet