p. 1

first look at gigacrete s revolutionary new panelsystems panelsystems by gigacrete quick look at how the panels are rapidly assembled 1 2 3 4 5 6 layout steel track on slab and permanently attach locate wall insulation panels into track slide down connectors and screw together top and bottom cut in electrical conduits and secure with insulating foam coat exterior with 3,500 psi stuccomax same day coat interior with fire rated 8500 psi plastermax

[close]

p. 2

what is gigacrete · gigacrete is a family of products based on low carbon footprint green ceramic binders significantly outperforming portland cement we never use portland cement it is the worst co2 producer on earth · two of these products are ideally suited to housing 1 stuccomax a totally waterproof exterior coating 2 plastermax a fire rated abuse resistant coating over insulation foam replacing gypsum board · all gigacrete coatings bond permanently to eps insulation foam concrete products bricks and plasters · all are one coat applications and fast to apply · all are abuse resistant non combustible no voc s no off-gassing utilizing only safe and healthy materials.

[close]

p. 3

what is gigacrete s unique panelsystems panelsystems is not what you think it is not a panelized building system at all it is an international patent pending panelized steel framed insulation system the building components are structural steel stud construction proven for decades signed off by a local structural engineer who only has to agree with the calculations of leading structural engineering already completed we reversed the building process typically the structural part comes first then r19 insulation is added in between the studs last this leaves inefficiencies thermal leaks and sound transmission through the steel into the home neither fast or ideal panelsystems starts with the last component r28 rigid foam insulation panels with computerized insert channels cut into the foam precisely where structural engineering dictates the steel studs fit to meet code compliance for a steel framed structure the structural components are then slipped into place and securely attached with self tapping screws exactly the same as steel framed construction only this can be done by unskilled labor purposely made to be very simple guaranteed square right the first time no measuring no room for errors.

[close]

p. 4

2.5 to 3 meter step ladder screw gun ramset gun tape measure metal shears pry bar tools needed to build a house

[close]

p. 5

6 thick panelsystems components t and 90 degree corners and flat panels

[close]

p. 6

large wall insulation panels can be lifted with one hand panelsystems is designed for rapid assembly by unskilled labor

[close]

p. 7

easily carry 8 feet x 8 feet of walls 5 meters -16 linear feet of wall panelsystems is easily carried into position

[close]

p. 8

locate panels next to where they are needed

[close]

p. 9

first stage lay out the bottom tracks according to plans.

[close]

p. 10

shoot ramset pins through steel bottom track into slab

[close]

p. 11

foam panel is dropped into steel stud bottom track shot into slab/floor with the ramset gun tools needed tape measure ramset gun pins and load track positioned over moisture gasket and shot into slab

[close]

p. 12

tools needed step ladder screw gun pry bar patented connectors based on steel framed construction methods slide down engineered grooves in panels forming panel to panel connections and the structural members both at the same time note the panelsystems designs determine where the structural studs and connectors are placed

[close]

p. 13

pre-cut t sections

[close]

p. 14

pre-cut corner sections

[close]

p. 15

column made from 4 pre-cut corners columns are used for additional structural support hvac heating ventilation air conditioning systems plumbing and venting chases typically used in corners

[close]