PCB Routers

 

Embed or link this publication

Description

PCB Routers

Popular Pages


p. 1

IMS PCB 2F ALUMINIUM ROUTER P024 D : Ø 1/8" (3.175 mm) Common Shank On Request Shank Dia 3mm ød ØD l 38.00 d mm l mm 1.60 8.00 - 2.00 9.00 - 2.40 9.00 - 3.00 10.00 - On request : Inch sizes / Special dimensions : Non stock items / Articles DIAMETER mm 1.60 2.00 2.40 3.00 RECOMMENDED PARAMETERS FOR ROUTING ALUMINIUM PCB SPINDLE SPEED RPM CHIP LOAD micron X-Y TABLE FEED m/min Z-FEED RATE m/min ROUTING DEPTH mm 40000 5.0 - 7.0 0.2 - 0.3 1.2 2.00 32000 9.0 -15.0 0.3 - 0.5 1.2 2.50 28000 23000 14.0 - 21.0 26.0 - 35.0 0.4 - 0.6 0.6 - 0.8 1.2 1.2 3.00 3.00 DEPTH IN TO BACK UP 1.0 1.0 1.0 1.0 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. APPLICATION Routing of aluminium Routing of IMS/metal PCB / Heat sink PCBs. ADVANTAGES Longer tool life Better finish No pre drilling Also available DLC COAT PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 2

HIGH FEED DIAMOND CUT ROUTER P660 P661 D : Ø 1/8" (3.175 mm) Common Shank Ød l 38.00 DIAMOND PATTERN On Request Shank Dia 3mm d mm l mm 0.50* 3.00 0.60* 3.00 0.80 5.00 - 0.90* 5.00 - 1.00 5.00 - 1.10 5.00* 7.00 ØD 1.20 5.00 - 1.30* 5.00 - 1.40* 5.00 - 1.50 8.00 - 1.60 8.00 - 1.70* 8.00 - 1.80 8.00 9.50* 2.00 8.00 9.50* 2.40 8.00 10.50* 2.50* 8.00 10.50 On request : Inch sizes / Special dimesions : Non stock items / Articles Article P661* UP CUT DRILL POINT Article P660 UP CUT FISHTAIL DIAMETER mm 0.60 0.80 0.90 1.00 1.20 1.30 1.40 1.50 1.60 1.70 1.80 2.00 2.40 RECOMMENDED PARAMETERS FOR ROUTING FR4 SPINDLE SPEED RPM X-Y TABLE SPEED m/min 70000 70000 70000 50000 50000 47000 43000 40000 38000 36000 34000 30000 35000 < 0.2 < 0.4 < 0.4 0.4 - 0.6 0.5 - 0.7 0.5 - 0.7 0.5 - 0.7 0.6 - 0.8 0.6 - 0.8 0.7 - 1.0 0.7 - 1.0 1.0 - 1.4 1.4 - 1.6 Z-FEED RATE m/min 0.2 0.2 0.2 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. APPLICATION For routing of all standard PCBs with aggressive feed rates on rugged spindles. ADVANTAGES Long life and excellent performance under good vacuum conditions. PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 3

DIAMOND CUT ROUTER P626 P627 D : Ø 1/8" (3.175 mm) Common Shank Ød l 38.00 DIAMOND PATTERN On Request Shank Dia 3mm ØD d mm l mm 0.70* 0.80* / 0.90* 1.00 1.10* 1.20 1.30* 1.40* 1.50 / 1.60 1.80 2.00 2.10* / 2.20* 2.30* 2.40 2.50* 2.60* / 2.80* 2.90* 3.00* 3.175* 5.00 5.00 7.00 5.00 7.00 5.00 7.00 5.00 7.00 5.00 7.00 5.00 7.00 8.50 8.50 9.00 10.50 9.00 10.50* 9.00 10.50* 9.00 10.50 9.00 10.50 9.00 9.00 9.00 10.50 9.00 10.50 On request : Inch sizes / Special dimensions : Non stock items / Articles Article P627* UP CUT DOWN CUT FISHTAIL Article P626 UP CUT FISHTAIL DIAMETER mm 0.80 0.90 1.00 1.20 1.30 1.40 1.50 1.60 1.70 1.80 2.00 2.40 2.50 3.00 3.175 RECOMMENDED PARAMETERS FOR ROUTING FR4 SPINDLE SPEED RPM X-Y TABLE SPEED m/min 70000 70000 50000 50000 47000 43000 40000 38000 36000 34000 30000 25000 24000 20000 20000 < 0.4 < 0.4 0.4 - 0.6 0.5 - 0.7 0.5 - 0.7 0.5 - 0.7 0.6 - 0.8 0.6 - 0.8 0.7 - 1.0 0.7 - 1.0 1.0 - 1.4 1.0 - 1.4 1.0 - 1.4 1.0 - 1.3 1.0 - 1.3 Z-FEED RATE m/min 0.2 0.2 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. APPLICATION Diamond patterned standard router used for routing outer contours in PCBs. ADVANTAGES Long life and excellent performance under efficient vacuum conditions. PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 4

CHIP BREAKER ROUTER P726 P727 P724 P729 D : Ø 1/8" (3.175 mm) Common Shank Ød l CHIP BREAKER Article P729* UP CUT 38.00 On Request Shank Dia 3mm ØD d mm l mm 0.40* 2.00 - - 0.50* - 0.60* 3.00 4.00 - 0.70* 4.00 5.00 - 0.80 5.00 6.00 7.00* 0.90 5.00 6.00 7.00* 1.00 5.00 7.00 8.50* 1.10* 5.00 7.00 8.50* 1.20 5.00 7.00 8.50* 1.30* - 1.40* 5.00 7.00 8.50* 1.50* 8.50 - - 1.60 8.50 - - 1.70* - 1.90* 8.50 - - 2.00 9.00 - - 2.10* 9.00 - - 2.40 9.00 - - 2.50* - 2.90* 9.00 - - 3.00 9.00 - - 3.175* 9.00 - - On request : Inch sizes / Special dimensions : Non stock items / Articles DRILL POINT Article P724* LHLC UP CUT FISHTAIL Article P727* LHRC DOWN CUT FISHTAIL Article P726 UUPP CCUUTT FISHTAIL RECOMMENDED PARAMETERS FOR ROUTING FR4 DIAMETER mm SPINDLE SPEED RPM X-Y TABLE SPEED m/min Z-FEED RATE m/min 0.40 0.50 0.60 0.80 1.00 1.20 1.30 1.40 1.50 1.60 1.70 1.80 2.00 2.40 2.50 3.00 3.175 70000 70000 70000 70000 70000 58000 54000 50000 46000 43000 41000 39000 35000 29000 28000 23000 22000 < 0.1 < 0.2 < 0.3 < 0.4 0.4 - 0.6 0.5 - 0.7 0.5 - 0.7 0.5 - 0.7 0.6 - 0.8 0.6 - 0.8 0.7 - 1.0 0.7 - 1.0 1.0 - 1.4 1.0 - 1.4 1.0 - 1.4 1.0 - 1.3 1.0 - 1.3 0.2 0.2 0.2 0.2 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. APPLICATION Spiral patterened standard router used for routing outer contours and inner contours of PCBs. Routing of inner slotting in the PCBs. ADVANTAGES Smooth edge finish . Good dimensional control because of efficient chip evacuation. PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 5

HIGH PERFORMANCE CHIP BREAKER ROUTER P732 D : Ø 1/8" (3.175 mm) Common Shank On Request Shank Dia 3mm Ød l 38.00 ØD CHIP BREAKER d mm l mm 0.40* 0.50* 0.60 0.80 0.90* 1.00 1.10* 1.20 1.30* / 1.40* 1.50 1.60 1.80 2.00 2.40 2.50 3.00 3.175 2.50 3.00 3.00 5.00 5.00 5.00 5.00 5.00 5.00 6.00 7.50 7.50 7.50 8.50 8.50 8.50* 8.50* - - 7.00* - On request : Inch sizes / Special dimensions : Non stock items / Articles Article P732 UP CUT FISHTAIL RECOMMENDED PARAMETERS FOR ROUTING FR4 DIAMETER mm SPINDLE SPEED RPM X-Y TABLE SPEED m/min Z-FEED RATE (m/min) Without Pre-Drilling With Drilling 0.40 119000 < 0.2 0.2 0.50 95000 < 0.3 0.2 0.60 80000 < 0.3 0.2 0.70 70000 0.3 - 0.4 0.2 0.80 70000 0.3 - 0.4 0.2 0.90 70000 0.3 - 0.4 0.2 1.00 70000 0.4 - 0.6 0.2 1.20 58000 0.5 - 0.7 0.4 1.30 54000 0.5 - 0.7 0.4 1.40 50000 0.5 - 0.7 0.4 1.50 46000 0.6 - 0.8 0.5 1.60 43000 0.6 - 0.8 0.5 1.70 41000 0.7 - 1.0 0.5 1.80 39000 0.7 - 1.0 0.5 2.00 35000 1.0 - 1.4 0.5 2.40 29000 1.0 - 1.4 0.5 2.50 28000 1.0 - 1.4 0.5 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.2 1.2 1.4 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. APPLICATION Spiral patterened standard router used for routing outer contours and inner contours PCBs. Routing of inner slotting in the PCBs. ADVANTAGES Smooth edge finish. Good dimensional control because of efficient chip evacuation. PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 6

SINGLE FLUTE ROUTER P926 FR CEM PCB PCB IMS PCB POLYIMIDE FLEXIBLE PCB D : Ø 1/8" (3.175 mm) Common Shank On Request Shank Dia 3mm ød ØD l 38.00 d 0.40 0.50 0.60 0.80 1.00 1.20 1.40 1.50 1.60 1.80 2.00 2.40 2.50 3.00 3.175 mm l mm 2.00 3.00 3.00 3.00 3.00 4.00 4.00 4.00 5.00 5.00 8.00 8.00 9.00 9.00 9.00 On request : Inch sizes / Special dimensions : Non stock items / Articles Article P926 SAFE END MATERIAL CUTTING SPEED (m/min) Diameter mm FR-4 190 - 200 0.40 0.60 0.80 1.00 1.20 1.60 2.00 2.40 3.00 3.175 2 4 6 8 10 18 34 44 53 55 RECOMMENDED PARAMETERS FOR ROUTING FR-2 160 - 180 CEM 3 160 - 180 CEM 1 PE 160 - 180 100 - 120 Chip Load microns PTEF 100 - 120 POLYIMIDE 100 - 120 24 4 4 4 4 46 6 6 6 6 68 8 8 8 8 8 10 10 10 10 10 10 14 12 14 14 14 18 22 22 25 25 25 34 40 40 35 35 35 44 52 52 40 40 40 53 64 64 45 45 45 55 66 66 50 50 50 AI 200 - 250 Cu/BRASS 180 - 220 1-2 1-2 1-2 1-2 22 33 55 88 12 12 15 15 18 18 20 20 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. APPLICATION Routing teflon and flexible boards. Soft plastic,foils,PE,PTFE,Polymide, PMMA routing. ADVANTAGES For material producing long chips Aluminium,Copper,Brass. Thin prepegs routing. PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 7

IMS PCB 2F ALUMINIUM ROUTER P424 P422 D : Ø 1/8" (3.175 mm) Common Shank On Request Shank Dia 3mm ød ød ØD ØD l 38.00 l 38.00 d mm l mm 0.40* 2.00 - 0.50* 2.50 - 0.60* 3.00 - 0.70* 0.80 3.00 3.00 - 1.00 4.00 - 1.20 4.00 - 1.40* 1.50 4.00 5.00 - 1.60 5.00 - 1.80* 6.00 - 2.00 7.00 2.40 7.00 - 2.50* 8.00 - 3.00 8.00 10.00 3.175* 8.00 - On request : Inch sizes / Special dimensions : Non stock items / Articles Article P422* SAFE END Article P424 DRILL POINT DIAMETER mm 0.40 0.60 0.80 1.00 1.20 1.40 1.50 1.60 1.80 2.00 2.40 2.50 3.00 3.175 RECOMMENDED PARAMETERS FOR ROUTING ALUMINIUM PCB SPINDLE SPEED RPM CHIP LOAD micron X-Y TABLE FEED m/min Z-FEED RATE PRE DRILLED m/min ROUTING DEPTH mm 80000 0.6 0.05 0.2 0.50 80000 1.3 0.1 0.4 0.50 80000 2.5 0.2 0.6 1.00 70000 4.3 0.3 0.8 1.20 58000 5.2 0.3 0.8 1.50 50000 8.0 0.4 0.8 1.50 46000 8.7 0.4 1.0 2.00 44000 9.1 0.4 1.2 2.00 39000 10.3 0.4 1.2 2.20 35000 11.4 0.4 1.2 2.50 29000 17.2 0.5 1.2 3.00 28000 17.9 0.5 1.2 3.00 23000 30.4 0.7 1.2 3.00 22000 31.8 0.7 1.2 3.00 DEPTH IN TO BACK UP 0.3 0.3 0.4 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. APPLICATION Routing of aluminium and copper panels. Routing of IMS/metal PCB / Heat sink PCBs. ADVANTAGES Depth routing with flat/square end style router. PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 8

FR CEM PCB PCB 2 FLUTE ROUTER P826 P820 IMS PCB POLYIMIDE FLEXIBLE PCB D : Ø 1/8" (3.175 mm) Common Shank On Request Shank Dia 3mm ød ØD l 38.00 d 0.25 - 0.30* 0.40* 0.50* - 0.70 0.80 1.00 1.10 1.20 1.50 1.60 1.90 2.00 2.40 2.50 3.00* 3.175* mm l mm 1.00 1.50 3.00 5.00 5.00 5.00 5.00 6.00 6.00 6.00 8.00 8.00 8.00 10.00 10.00 - 8.00* 8.00* 8.00* 8.00* 8.00* - - On request : Inch sizes / Special dimensions : Non stock items / Articles Article P820* SAFE END Article P826 FISHTAIL MATERIAL CUTTING SPEED m/min Diameter mm FR-4 190 - 200 0.25 0.40 0.60 0.80 1.00 1.20 1.60 2.00 2.40 3.00 3.175 3 4 5 6 8 10 18 34 44 53 55 RECOMMENDED PARAMETERS FOR ROUTING FR-2 160 - 180 CEM 3 160 - 180 CEM 1 PE 160 - 180 100 - 120 Chip Load microns PTEF 100 - 120 POLYIMIDE 100 - 120 3 3 333 3 4 5 555 5 5 6 666 6 6 8 888 8 8 10 10 10 10 10 10 12 12 14 14 14 18 22 22 25 25 25 34 40 40 35 35 35 44 52 52 40 40 40 53 64 64 45 45 45 55 66 66 50 50 50 Al 200 - 250 Cu/BRASS 180 - 220 11 22 22 33 33 55 88 12 12 15 15 18 18 20 20 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. AAPPPPLLIICCAATTIIOONN Routing aluminium and copper heat sinks. Routing flexi and flexirigid boards. ADVANTAGES Excellent surface finish for plated through holes. PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 9

3 FLUTE ROUTER P436 FR CEM PCB PCB IMS PCB POLYIMIDE FLEXIBLE PCB D : Ø 1/8" (3.175 mm) Common Shank On Request Shank Dia 3mm ød ØD l 38.00 d 0.60 0.70 1.00 1.20 1.50 1.60 1.80 2.00 2.40 3.00 3.175 mm l mm 3.00 3.00 5.00 5.00 7.00 7.00 7.00 9.00 9.00 10.00 10.00 5.00 - 7.50 - - - - - - - On request : Inch sizes / Special dimensions : Non stock items / Articles Article P436 FISHTAIL MATERIAL CUTTING SPEED m/min Diameter mm FR-4 190 - 200 0.60 0.80 1.00 1.20 1.60 2.00 2.40 3.00 3.175 5 6 8 10 18 34 44 53 55 RECOMMENDED PARAMETERS FOR ROUTING FR-2 160 - 180 CEM 3 160 - 180 CEM 1 PE 160 - 180 100 - 120 Chip Load microns PTEF 100 - 120 POLYIMIDE 100 - 120 56 68 8 10 10 12 18 22 34 40 44 52 53 64 55 66 66 7 7 88 8 8 10 10 10 10 12 14 14 14 22 25 25 25 40 35 35 35 52 40 40 40 64 45 45 45 66 50 50 50 Al 200 - 250 Cu/BRASS 180 - 220 22 22 33 55 88 12 12 15 15 18 18 20 20 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. APPLICATION Routing Aluminium and Copper heat sinks. Routing Flexi and flexirigid board. ADVANTAGES Excellent surface finish for plated through holes. Efficient chip evacuation. PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 10

HIGH PERFORMANCE DEPANELING ROUTER P650 D : Ø 1/8" (3.175 mm) Common Shank On Request Shank Dia 3mm Ød l 38.00 ØD d 1.40* 1.50* 1.60 1.80* 2.00 2.40* 2.50* mm l 7.00 8.00 8.00 8.00 8.00 10.50 10.50 mm DIAMOND PATTERN On request : Inch sizes / Special dimensions : Non stock items / Articles Article P650 UP CUT FISHTAIL DIAMETER mm 1.40 1.60 1.80 2.00 2.40 2.50 RECOMMENDED PARAMETERS FOR ROUTING FR4 SPINDLE SPEED RPM CHIP LOAD mm/rev mil/rev mm/sec 38000 32000 0.032 0.050 1.26 1.56 20 26 30000 30000 25000 24000 0.059 0.059 0.059 0.059 1.56 1.56 1.56 1.56 32 32 32 32 X-Y TABLE FEED m/min 1.2 1.6 1.9 1.9 1.9 1.9 in/min 47 62 75 75 75 75 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. APPLICATION For routing / depaneling PCBs in EMS industries. ADVANTAGES For smooth finish. No loose burr on routed edge. Close dimensional control. Run with high feed rates and long tool life. PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 11

PIN ROUTER P628 D : Ø 1/8" (3.175 mm) Common Shank On Request Shank Dia 3mm Ød l 38.00 ØD d 2.00* 2.40* 3.00* 3.175 mm l 13.00 13.00 13.00 13.00 mm DIAMOND PATTERN DIAMETER mm 2.00 2.40 3.00 3.175 On request : Inch sizes / Special dimensions : Non stock items / Articles Article P628 UP CUT FISHTAIL RECOMMENDED PARAMETERS FOR ROUTING FR4 SPINDLE SPEED RPM X-Y TABLE SPEED m/min 30000 25000 20000 1.0 - 1.4 1.0 - 1.4 1.0- 1.3 20000 1.0 - 1.3 Z-FEED RATE m/min 0.5 0.5 0.5 0.5 Tabulated parameters provide guidelines which acts as starting points for optimising speeds and feeds at the user's end. APPLICATION Diamond patterened router used for routing contours in PCBs mannual feeding machines. ADVANTAGES PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

p. 12

FINISHING ROUTER P370 D : Ø 1/8" (3.175 mm) Common Shank On Request Shank Dia 3mm Ød l 38.00 ØD d 0.60* 0.80* 1.00* 1.00* 1.40* 1.50* 1.60* 1.80* 2.00* 2.40* 2.50 mm l mm 3.00 5.00 5.00 7.00 7.00 7.00 7.00 8.50 7.00 7.00 7.00 On request : Inch sizes / Special dimensions : Non stock items / Articles APPLICATION PCB routing outer and inner contours with very high surface finish requirements. It is especially used for edge trimming on pre- routed slots. ADVANTAGES Burr free routing of gold fingers. Excellent surface finish on pre-routed slots. PACKING 10 tools per pack. 50 tools per pack. SCAN TO ORDER www.indsphinx.com +91 1792 232860 / 232960 customerfocus@indsphinx.com

[close]

Comments

no comments yet