p. 1

board with 8 relay ready for your project 12v description i have developped this board because i needed such a board to operate a microwave pop-corn oven and a couple of motors 12v dc in vending machine there are 8 relays each capable of switching 12vdc/15a or 240vac/10a each relay has an led to indicate when it is operated the required power is 12v dc minimum 300 ma the set including one assembled and tested relay s board one 10 pin flat cable approximately length 30cm one additional 10 pin connector c sigma-shop.com all rights reserved.

[close]

p. 2

specifications relays has normally open no and normally closed nc contacts rated for voltages 12vdc/15a 24vdc/15a 125vac/15a 250vac/10a relay s datasheed relays used ras-1215 1c http www.sigma-shop.com/information/relay/ras.pdf supply 12 volts 300ma dimension 120mm 80mm 20mm connect power 12v to board connect device who you like to control c sigma-shop.com all rights reserved.

[close]

p. 3

this is a scheme of one relay module channel here is a sample project of atmel application board connected to avr project controlled via usb c sigma-shop.com all rights reserved.

[close]