SAN Heated Hoses

 

Embed or link this publication

Description

SAN Heated Hoses Catalogue

Popular Pages


p. 1

Heated Hoses

[close]

p. 2

Table of Content Page Heated Hoses.................................................................................................................................................. 3 Applications..................................................................................................................................................... 4 Ex Heated Hoses for Analysis Technique, Type ELH/a................................................................................... 5 Technical Details for Analytic Hose................................................................................................................. 6 Ex Heated Hoses for Analytic, Self-regulating and cut to length Type ELH/sb............................................... 7 Technical Details for Analytic Hose self-regulating and cut to length............................................................. 8 Ex Heated Hoses for medium, high and super high pressure Type ELH/md/hd/shd...................................... 9 Technical Details for Pressure Hoses.............................................................................................................. 10 End Fittings...................................................................................................................................................... 11 Outer Sheath, Temperature Sensors, End Cap............................................................................................... 15 Measuring and Control.................................................................................................................................... 16 Ordering Key for Heated Hoses...................................................................................................................... 20 Ordering Key for Terminated Heated Hoses.................................................................................................... 21 Questionnaire for Technical Specifications..................................................................................................... 22 Special Heated Hoses on customer’s request................................................................................................ 23 Important Information Our standard heated hoses are available for temperatures up to 250°C and a pressure range up to 500 bar (depends on the diameter). Heated hoses above 250° C are available upon request. We are also able to offer heated hoses for applications in hazardous areas. The construction of the so called Ex-HeatedHoses differs to our standard types in the use of Ex-approved heating components. For example heating cable, heating tapes, termination kits, temperature sensors (Ex-PT100), outer sheath and devices for measurement and control. Considering the fact that applications in hazardous areas require complicated and complex solutions please contact our engineers and they will offer individual and economical solutions to your heating problems. Upon request we send you all ex approvals and certificates including the delivery of the products. You can find the ordering key for the heated hoses with standard length on page 20. And on page 21 the heated hoses for termination at site. Questionnaire on page 22 helps you and our engineering department to fix the specification of the heated hose. The information and advertising statements in this product catalogue, regardless of type, in particular descriptions, illustrations, drawings, patterns, and data concerning quality, design, composition, performance, consumption and applicability as well as dimensions of the range of products are subject to alterations unless they are expressly stated as binding. They do not represent any assurances or guarantees, regardless of type. Slight deviations from the product information are regardless as authorized, as far as they are not considered to be unacceptable to the customer. The right to amend errors and technical data is reserved. For use of customers own medium carrier we are not responsible for quality and suitability in any gurantee matter. Fluoropolymer materials allow permeation of gases typically encountered in gas sampling and / or analysis applications. This may or may not affect the measurement accuracy attainable with the system. The buyer is responsible for system design and product specification that takes this into consideration and agrees that the seller is not responsible for problems in the buyer’s system that are related to the permeation of gases through the tube wall. Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 2 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 3

Member of the NIBE Group Heated Hoses at a glance Construction and function Heated hoses are the ideal solution for flexible transportation of liquid or gas substances without heat loss. The necessary temperature, power, application, and outer protection material determine the choice of the heated hose technique. Gas substances are channeled from the measurement point to the analysis instrument in the analysis technique, i.e. in trash burning ovens, refineries, chemical industry, motor exhaust analysis, etc. For these applications the gases are to be freeze protected, protected against condensation, or guarantee for constant temperatures up to 250°C. Application in general • • • • • • • Frost protection for different media Prevention of condensation Maintenance of liquids or gases at operational temperature Transportation of gas samples from the measurement point to an analyzer Medium transportation of high viscosity materials in a fluid state Medium transportation where certain temperatures are essential for the fabrication characteristic Medium carrier must be transportable or moveable due to a mobile supply station Analysis Measurement Hot Melt Machines Polyurethane foaming equipment Wax processing equipment Bitumen processing equipment Heavy oil processing equipment Food processing equipment Filling Machines Application examples • • • • • • • • All our heated hose types can be used in hazardous areas under certain considerations. Under certain circumstances, terms and approvals heated hoses can be used in hazardous areas. As an ATEX certified company (IBExU 03 ATEX 004Q) we fullfills the high level security standard of the Ex-guiding rules 94/4/EG (ATEX 100a). With our ATEX approved heating components like heating cable, heating tapes, connection kits, temperature sensors and controllers we supply heated hoses for applications in hazardous areas. Caused by complexity of possible Ex-area applications please contact our engineering department. Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 3

[close]

p. 4

Application Ranges Chemical Industry Glueing Systems Cable Carrier Systems Exhaust Monitoring in power plants Process gas monitoring Car exhaust measurement Painting systems for Automotive Industry Surface Protection Glue Robots for car body compound Tank filling machines Glue Robots for car windscreens compound Water analysis systems Chemical Hoses Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 4 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 5

Member of the NIBE Group Heated Hoses for Analysis Technique Type ELH/a up to 250ºC ELH/a ... Transportation of gas substances from the measurement point (i.e.chimney, connection on a heated measurement probe) to the analysis measurement unit e.g. mass spectrometer, gas chromatograph etc. Installed in a system or as transportable device (i.e. exhaust measurement unit). Nominal Voltage..................................24 V, 110 V, 230 V, 400 V Temperature Sensor.............................. PT 100, thermocouples Various Designs Background of the application • • • Condensation is not allowed to build up in gas. This would cause sedimentation and clogging inside the analysis line, acidification drops are built. Differences in the gas temperatures on the way to the analyzer can cause inaccurate values Prevention of dropping below the dew point, especially by exhaust of gases. The dew point of the fossil fuel is between 100°C and 190°C, depending on the sulfur content. Coal, oil and gas heating units Exhaust supervision in power supply stations Trash burning stations Process gases in refineries, petro-chemical and chemical industry Air condition monitoring Motor exhaust measurement Freeze protection in the water analysis ELH/a: With a fixed inner hose of PTFE ELH/ad:With a fixed inner hose of PTFE, steel wire braiding and RSL-fittings on both sides ELH/ak:With a fixed copper inner hose ELH/ae:With a fixed stainless steel inner hose Type Supplement Application Examples: • • • • • • • ELH/ /none................................... Standard polyamide braiding ELH/ /i.................................. Exchangeable inner hose of PTFE ELH/ /T.............................. Outer protection “step-proof” metal corrugated hose with PVC cover ELH/ /iT......................... Exchangeable inner hose of PTFE and “step proof” outer protection ELH/ /w..........................................................Corrugated piping ELH/ /Ex.....................................................For hazardous areas Termination to length Technical Data Heating Power................................................... 10 bis 250 W/m Max. Length..........................................................0.3 bis 110 m Nominal diameter....................................................4 bis 16 mm Operation Temperatures max. 250°C (higher temperatures upon request) Inner hose........................................................................... PTFE Exchangeable PTFE PTFE with braiding and RSL fittings on both sides Stainless steel Silicone Tube bundle Outer Sheath................................................Polyamide braiding Corrugated piping Metal braiding Plugs...........................................upon customer’s requirements Construction of heated hose 11 ) ) 10 9) 8) 1) PTFE inner hose (exchangeable) 2) Silicone end cap – End termination 3) Outer Sheath 4 + 5) Insulation 6) Spacer 7) Fixed inner hose 8) PTFE insulated heating cable 9) Additional cable 10) Power supply cable and Temperature sensor cable 11) Fixed stainless steel inner hose 7) 1) 2) 3) 4) 5) 6) Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 5

[close]

p. 6

Technical Details for Analytic Hose Table of heating power at 230/400 Volts for Standard Analytic Hoses Type a/ad/ae max length Heating power at 200ºC max length Heating power at 250ºC max length Heating power at 100ºC DN m W/m 75 70 80 65 95 40 4 80 65 90 60 110 35 6 90 60 100 55 120 30 8 100 55 110 50 130 25 add.diametres upon request 10 W/m m W/m m Type ai/adi max length Heating power at 100ºC Heating power at 200ºC max length Heating power at 250ºC max length DN m W/m 75 75 80 65 95 40 4 80 70 90 60 110 35 6 90 68 100 55 120 30 8 100 55 110 50 130 25 add. diametres upon request 10 W/m m W/m m Heated Hose outer Sheath Type Polyamid braiding DN mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm bar 30 25 20 15 10 5 0 0 4 125 200 250 45 45 150 200 250 42.5 42.5 230 200 250 42 42 6 150 200 250 45 49 170 200 250 42.5 42.5 230 200 250 42 42 8 170 200 250 45 49 185 200 250 42.5 42.5 230 200 250 42 42 10 185 200 280 45 49 210 200 280 42.5 54.5 280 200 280 42 48 Operating pressure add. diametres upon request min. bending radius ad min bending radius a min bending radius ae Outer diameter at 200ºC Corrugated piping Outer diameter at 250ºC min bending radius ad min bending radius a min benidng radius ae Outer diameter at 200ºC Outer diameter at 250ºC min bending radius ad min bending radius a min benidng radius ae Outer diameter at 200ºC Outer diameter at 250ºC Metal corrugated hose with PVC cover PTFE t=Wall thickness Operating pressure at +20ºC 5 10 15 20mm Inner Diameter Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 6 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 7

Member of the NIBE Group Analytic Hoses Type ELH/sb Self regulating and cut to length This type is used in analysis applications too. With the self regulating heating cables inside, the heating power is controlled according to the ambient temperature. The bus wires of the selfregulating cable provide an infinite amount of parallel switched resistances that make it possible to cut the heating tape in any desired position without developing dead or cold zones in the heating tape. When the operating temperature rises, the plastic molecular structure expands and lowers the connection between the carbon particles. The resistance rises, and the power decreases. Thus, the heating tape adjusts to every individual heating application. This option enables the customer to terminate and cut the heated hoses to length by himself at site and fix the hose to the assembly requirements. Various Designs ELH/asb:...................................With a fixed inner hose of PTFE ELH/adsb: . With a fixed inner hose of PTFE, steel wire braiding* ELH/aesb:....................... With a fixed stainless steel inner hose ELH/a(d)isb:.......................... Exchangeable inner hose of PTFE *not to cut off Type Supplement ELH/ /ohne:.................................. Standard polyamide braiding ELH/ /W:.........................................................Corrugated piping ELH/ /T:............Outer protection “step-proof” metal corrugated hose with PVC cover Termination to length Application Examples: • • • Analysis technique up to 120°C Environmental technique Frost protection Technical Data Heating Power.......................................................10 to 60 W/m Max. Length................................................................ca. 150 m Nominal diameter....................................................... 4 to 8 mm Operation Temperatures......................up to 120°C switched on ............................................................up to 200°C switched off Nominal Voltage..................230 V, other voltages upon request Heating cable........................................Self regulating, earthing From the reel for termination at site with fixed inner hose of PTFE or factory terminated Termination..................................... from customers themselves Inner hose.........................................................single inner hose Bundle of inner hoses PTFE stainless steel Outer Sheath................................................Polyamide braiding Corrugated piping Metal braiding Plugs...........................................upon customer’s requirements Construction of heated hose 9) 8) 7) 1) PTFE inner hose 2) Gland front side 3) Outer Sheath 4 + 5) Insulation 6) Heating cable ELSR 7) Fixed inner hoses PTFE 8) Plastic end cap – Termination 9) Power supply cable 6) 5) 4) 3) 2) 1) Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 7

[close]

p. 8

Technical Details for Pressure Hoses Maintenance temp. (ºC) Inner Diameter (mm) Nominal Voltage (V) Power at 0ºC (W/m) Power at +10ºC (W/m) Power at operating temp. (W/m) Hose length at -20ºC (m) at +10ºC (m) Polyamidbraiding Outer sheath PA-corrugated Metal corrugated Temp. Ex_zone 1+2 5 30 50 80 100 120 4 up to 12 230 13 37 40 49.5 49.5 66 9.2 30 38 47 47 63 11.5 20 28 30.5 26 35 109 52 65 55 55 40 161 84 75 60 60 45 45mm 43mm 43mm 43mm 43mm 43mm 55mm T6 T6 T3 (T4) T3 T3 T2 45mm 45mm 45mm 45mm 55mm 1 1/4” 1 1/2” Accessories Termination technique at site for type ELH/sb Termination set SBA 1 Shrink technique Termination set SBA 2 Silicone cap with cable entry Termination set SBA 3 Connection box Termination set SBA 4 Plastic end cap Description: Each set includes the instruction manual. Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 8 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 9

Member of the NIBE Group Standard Heated Pressure for Analysis Technique up to 250ºC Type ELH/md, ELH/hd, ELH/shd Function: ELH/md, /hd, /shd These types are used to heat maintain temperature and transport media without heat loss. For Example oil, fat, wax, sap, tar, paint, water, carbon dioxide, plastic, moulding material, glue, liquid food. Mostly mounted on moveable machine parts (Robots) or units. Operation Temperatures........up to 250°C (higher temperatures upon request) Operating Pressure....................................... 80 bar (T1, DN 25) 500 bar (T3, DN 6) Nominal Voltage.........................12 V, 24 V, 110 V, 230 V, 400 V Temperature Sensor.............................. PT 100, Thermo couple Reason of application • • • The medium is only free-flowing at a certain temperature and achives its specific fabrication characteristics at a certain temperature range. The medium can only be treated at a certain temperature. The medium carrier must be transportable or moveable due to a mobile supply station. Compound machinery / hot glue, packaging, label machinery Surface protection / tar and painting machinery Food processing industry, fill machinery Foam machinery, PU-foaming, roof renewal, packaging machinery Epoxy sap machinery Washing benches, steam cleaner, pipe cleaning Fill tubing and silo tubes Tanker tubing Glass industry, for coating and glueing from thermo glass panels Various Designs Application Examples • • • • • • • • • Technical Data Heating Power...... up to 310 W/m (higher power upon request) Max. Length.............................................0.3 up to 60 m (DN 4) 16 m (DN 25) Nominal diameter................................................ 4 up to 25 mm Inner hose...............................PTFE with stainless steelbraiding single= T1, double=T2, triple=T3 Fittings................................................. Steel bichromate coated Stainless steel (see Fitting table page12) Outer Sheath........................................................PA corrugated PU spirally wound corrugated Polyamide braiding Galvanized steel braiding Stainless steel (AISI 303) End Cap......................................................................... Silicone EPDM without silicone Plastic Metal Cable exit....................................................... lateral to the front Led back Front side Under end cap led back Lateral Combinations Glands.................................................................... Fixed glands Moveable glands Additional Cable .......... On customer’s request 0.5 up to 4mm2 Max. 15 additional cables Plugs .........................................upon customer’s requirements Controller....................................................... ELTC-H-Controller 1) Fitting 2) End cap termination 3) Outer Sheath 4 + 5) Insulation 6) PTFE-insulated heating cable 7) PTFE inner hose with pressure layer single, double or triple 8) Spacer 9) Temperature sensor 10) Additional Cables 11) Connection cable – power supply Construction of heated hose 1) 2) 3) 4) 5) 6) 7) 9) 10 ) 11 ) 8) Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 9

[close]

p. 10

Technical Details for Pressure Hoses TYPE max operating press. md max operating press. hd max operating press. shd DN bar bar bar 275 / / 4 240 275 500 6 200 250 475 8 175 225 475 10 150 200 450 13 135 175 363 16 100 150 275 20 25 80 130 225 Operating pressure valid for operating temperatures in the range of +20º to +50ºC Temperature coefficient of correction ELH/md/hd/shd 100ºC 0.98 150ºC 0.9 200ºC 0.83 250ºC 0.6 Standard Heating Power at 230/400Volts TYPE Heating power at 100ºC max. length Heating power at 200ºC max. length Heating power at 250ºC max length DN m W/m 85 60 110 50 110 45 4 100 55 120 45 130 40 6 110 50 130 40 150 35 8 135 40 150 35 180 30 10 160 35 180 30 210 25 13 180 30 225 23 240 20 16 210 25 260 20 270 18 20 240 20 290 18 310 16 25 W/m m W/m m Outer Sheath TYPE Polyamide braiding min bending radius Outer diameter at 200ºC Outer diameter at 250ºC Stainless steel braiding min bending radius Outer diameter at 200ºC Outer diameter at 250ºC Corrugated piping min bending radius Outer diameter at 200ºC Outer diameter at 250ºC Robot-currugated piping min bending radius Outer diameter at 200ºC Outer diameter at 250ºC min bending radius Outer diameter at 100ºC min bending radius Outer diameter at 200ºC Outer diameter at 250ºC mm mm mm mm mm mm mm mm 150 42.5 42.5 125 42 280 42 42 170 42.5 42.5 150 42 280 42 42 185 42.5 42.5 170 42 280 42 42 210 42.5 54.5 185 42 320 42 48 210 42.5 54.5 210 50 320 48 48 250 54.5 82.5 250 50 405 48 60 300 54.5 82.5 300 60 535 60 72.5 535 72.6 72.6 300 82.5 82.5 mm mm mm 150 42.5 42.5 170 42.5 42.5 185 42.5 42.5 210 42.5 54.5 210 42.5 54.5 250 54.5 82.5 300 54.5 82.5 300 82.5 82.5 mm mm mm 135 45 45 170 45 49 195 45 49 200 45 49 230 49 55 260 55 61 300 61 61 300 61 68 DN mm mm mm 4 125 45 45 6 150 45 49 8 170 45 49 10 185 45 49 13 210 49 55 16 250 55 61 20 300 61 61 25 300 61 68 Polyurethane corrugated piping Metal corrugated hose with PVC cover Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 10 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 11

Member of the NIBE Group Fitting Table End fitting DN Thread to tube mm D6 D8 D 10 D 12 D 15 D 18 D 22 D 28 D 35 D 42 D8 D 10 D 12 D 14 D 16 D 20 D 25 D 30 D 38 G 1/4” G 1/4” G 3/8” G 3/8” G 1/2” G 1/2” G 3/4” G 1” G 1” G 1 1/4” G 1 1/4” G 1 1/2” UNF 7/16 - 20 UNF 1/2 - 20 UNF 9/16 - 18 UNF 9/16 - 18 UNF 3/4 - 16 UNF 3/4 - 16 UNF 7/8 - 14 UNF 7/8 - 14 UNF 1 1/16 - 12 UNF 1 1/16 - 12 UNF 1 5/16 - 12 UNF 1 5/8 - 12 UNF 1 7/8 - 12 G 1/8” G 1/4” G 3/8” G 3/8” G 1/2” G 1/2” G 3/4” G 3/4” G 1” G 1” G 1 1/4” G 11/2” RSL standpipe, light series DN 05 06 08 10 13 16 20 L 25mm L 25mm L 26mm L 26mm L 28mm L 30mm L 32mm L 30mm L 35mm L 38mm L 27mm L 29mm L 29mm L 29mm L 33mm L 39mm L 44mm L 44mm L 41mm 17 17 19 19 27/24 27/24 32 41 41 50 50 56 14 17 17 17 24 22/24 27/32 27/32 32 32 41 51 56 14 17 22 22 27 27 32 32 36 41 50 55 Hex Order No. RSL-05 RSL-06 RSL-08 RSL-10 RSL-13 RSL-16 RSL-20 RSL-25 RSL-32 RSL-40 RSS-05 RSS-06 RSS-08 RSS-10 RSS-13 RSS-16 RSS-20 RSS-25 RSS-32 DKR-05 DKR-06 DKR-08 DKR-10 DKR-10-1/2” DKR-13 DKR-16 DKR-20 DKR-25 DKR-25-1 1/4” DKR-32 DKR-40 DKJ-06-7/16 DKJ-06 DKJ-06-9/16 DKJ-08 DKJ-10 DKJ-13 DKJ-13-7/8 DKJ-16 DKJ-16-1 1/16 DKJ-20 DKJ-25 DKJ-32 DKJ-40 AGR-04 AGR-06 AGR-08 AGR-10 AGR-10-1/2” AGR-13 AGR-16 AGR-20-3/4” AGR-20 AGR-25 AGR-32 AGR-40 D L 25 32 40 05 06 DN 08 10 13 16 RSS standpipe, heavy series D 20 L 25 32 05 06 08 DN 10 10 13 16 20 25 25 32 40 DKR Female Sealing head, swivel nut (BSP) SW G DKJ Female swivel sealing head 37º (UNF) SW 06 06 06 08 DN 10 13 13 16 16 G 20 25 32 40 AGR Male 60º (BSP) SW 05 06 08 DN 10 10 13 16 G 60º 20 20 25 32 40 Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 11

[close]

p. 12

Fitting Table End fitting DN 06 08 10 10 G 13 16 20 AGR F Male flat sealing 05 SW DN Thread G 1/8” G 1/4” G 3/8” G 3/8” G 1/2” G 1/2” G 3/4” G 3/4” to tube mm Hex 14 17 22 22 27 27 32 32 Order No. AGR-05-fld AGR-06-fld AGR-08-fld AGR-10-fld AGR-10-fld-1/2” AGR-13-fld AGR-16-fld AGR-20-fld-3/4” AGN/NPT Male 06 SW DN 08 10 10 13 1/4” 18 NPT 3/8” 18 NPT 3/8” 18 NPT 1/2” 14 NPT 1/2” 14 NPT 3/4” 14 NPT 3/4” 14 NPT 1” 11 1/2 NPT 1” 11 1/2 NPT 1 1/4” 11 1/2 NPT 1 1/2” 11 1/2 NPT UNF 7/16 - 20 UNF 1/2 - 20 UNF 1/2 - 21 UNF 9/16 - 18 UNF 9/16 - 18 UNF 3/4 - 16 UNF 7/8 - 14 UNF 1 1/16 - 12 UNF 1 5/16 - 12 UNF 1 5/8 - 12 UNF 1 7/8 - 12 M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 18 x 1.5 M 22 x 1.5 M 26 x 1.5 M 30 x 2 M 36 x 2 M 45 x 2 M 52 x 2 6 8 10 12 15 18 22 28 35 42 14 17 19 22 22 27 27 36 36 46 50 14 14 14 17 17 22 24 27 36 46 50 12 14 17 19 22 27 32 36 46 55 AGN-06 AGN-08 AGN-10 AGN-10-1/2” AGN-13 AGN-16 AGN-20 AGN-20-1 AGN-25 AGN-32 ANG-40 AGJ-06-7/16” AGJ-06 AGJ-08-1/2” AGJ-08 AGJ-10 AGJ-13 AGJ-16 AGJ-20 AGJ-25 AGJ-32 AGJ-40 CEL-04 CEL-06 CEL-08 CEL-10 CEL-13 CEL-16 CEL-20 CEL-25 CEL-32 CEL-40 G 60º 16 20 20 25 32 40 AGJ Male UNF 37º SW 06 DN 06 08 08 10 13 16 20 25 32 40 G 37º CEL Metric Male 24º light series SW DN 05 06 08 10 13 16 20 25 G 24º 32 40 CES Metric Male 24º heavy series SW DN 05 06 08 10 13 16 20 25 32 M 16 x 1.5 M 18 x 1.5 M 20 x 1.5 M 22 x 1.5 M 24 x 1.5 M 30 x 2 M 36 x 2 M 42 x 2 M 52 x 2 8 10 12 14 16 20 25 30 38 17 19 22 22 24 30 36 46 55 CES-05 CES-06 CES-08 CES-10 CES-13 CES-16 CES-20 CES-25 CES-32 G 24º Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 12 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 13

Member of the NIBE Group Fitting Table End fitting DN Thread G 1/4” G 1/4” G 3/8” G 3/8” G 1/2” G 1/2” G 3/4” G 1” G 1” G 1 1/4” G 1 1/4” G 1 1/2” M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 18 x 1.5 M 22 x 1.5 M 26 x 1.5 M 30 x 2 M 36 x 2 M 45 x 2 M 52 x 2 M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 18 x 1.5 M 22 x 1.5 M 26 x 1.5 M 30 x 2 M 36 x 2 M 45 x 2 M 52 x 2 M 30 x 1.5 M 38 x 1.5 M 45 x 1.5 M 52 x 1.5 M 65 x 2 6 8 10 12 15 18 22 28 35 42 6 8 10 12 15 18 22 28 35 42 22 28 35 42 52 BDN female swivel flat sealing SW 05 DN to tube mm Hex 17 17 19 19 27 27 32 41 41 50 50 56 14 17 19 22 27 32 36 41 50 60 14 17 19 22 27 32 36 41 50 60 36 46 55 60 75 Order No. BDN-05-G BDN-06-G BDN-08-G BDN-10-G BDN-10-G-1/2” BDN-13-G BDN-16-G BDN-20-G BDN-25-G BDN-25-G-1 1/4” BDN-32-G BDN-40-G BDN-05-M BDN-06-M BDN-08-M BDN-10-M BDN-13-M BDN-16-M BDN-20-M BDN-25-M BDN-32-M BDN-32-M DKL-05 DKL-06 DKL-08 DKL-10 DKL-13 DKL-16 DKL-20 DKL-25 DKL-32 DKL-40 DKM-20 DKM-25 DKM-32 DKM-40 DKM-50 06 08 10 10 13 G 16 20 25 25 32 40 BDN M female swivel flat sealing, metric SW 05 06 08 DN 10 13 16 20 G 25 32 40 DKL Female sealing head, metric SW 05 06 DN 08 10 13 16 20 25 32 40 G DKM female sealing head, metric SW DN 20 25 32 40 50 G DKS female sealing head, metric, heavy series SW DN 06 08 10 13 16 20 25 32 M 18 x 1.5 M 20 x 1.5 M 22 x 1.5 M 24 x 1.5 M 30 x 2 M 36 x 2 M 42 x 2 M 52 x 2 10 12 14 16 20 25 30 38 22 24 27 30 36 46 50 60 DKS-06 DKS-08 DKS-10 DKS-13 DKS-16 DKS-20 DKS-25 DKS-32 G Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 13

[close]

p. 14

Fitting Table End fitting DKOL female swivel light series SW 06 08 10 DN 13 16 20 25 32 40 DN Thread M 14 x 1.5 M 16 x 1.5 M 18 x 1.5 M 22 x 1.5 M 26 x 1.5 M 30 x 2 M 36 x 2 M 45 x 2 M 52 x 2 to tube mm 8 10 12 15 18 22 28 35 42 Hex 17 19 22 27 32 36 41 50 60 Order No. DKOL-06 DKOL-08 DKOL-10 DKOL-13 DKOL-16 DKOL-20 DKOL-25 DKOL-32 DKOL-40 G DKOS Female swivel heavy series SW DN 05 06 08 10 13 16 20 M 16 x 1.5 M 18 x 1.5 M 20 x 1.5 M 22 x 1.5 M 24 x 1.5 M 30 x 2 M 36 x 2 M 42 x 2 M 52 x 2 8 10 12 14 16 20 25 30 38 19 22 24 27 30 36 46 50 60 DKOS-05 DKOS-06 DKOS-08 DKOS-10 DKOS-13 DKOS-16 DKOS-20 DKOS-25 DKOS-32 G 25 32 Material: Stainless steel Steel bichromate coated Special materials upon request Special materials and fittings upon request Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 14 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 15

Member of the NIBE Group Temperature Elements, Outer Sheath and End Caps Temperature controlling and over temperature protection PT 100, 2-, 3- and 4-wires Thermocouple Fe-CuNi Thermocouple NiCr-Ni PTC Temperature switch (break contact/make contact) 150....200°C Option: Temperature sensor Sensor and/or switch exchangeable Outer Sheath Polyamide black PA corrugated hose Galvanized steel or stainless steel braiding PU spirally wound corrugated hose End Cap Metal end cap Silicone/EPDM end cap Plastic end cap Correction cable exit Lateral Lateral to the front Front side Led back Combination Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 15

[close]

Comments

no comments yet