SAN Ex Material

 

Embed or link this publication

Description

SAN Ex Material Catalogue

Popular Pages


p. 1

Ex Material

[close]

p. 2

Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 2

[close]

p. 3

Member of the NIBE Group Ex-information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4 Heating Cable Selfregulating heating cable . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 Constant wattage heating cable . . . . . . . . . . . . . . . . . . . . . . . Page 18 PTFE insulated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 20 Magnesium oxide insulated . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26 Heating Mats Heating jackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 29 Silicone heating mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 30 Heated Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 31 Anti Condensation Heaters 30-100W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 32 250W+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 37 Industrial Radiators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 42 Immersion Heaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 48 Drum Heaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 59 Thermostats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 61 Temperature limiter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 65 Measurement and control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 67 Mounting Accessories Terminal boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 68 Splice connector kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 72 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 73 Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 3

[close]

p. 4

EX-INFORMATION Information concerning explosion protected electrical material. Marked Ex. Explosion Triangle Oxygen Fuel Ignition Source Within the production and process plant industry, there are many processes where hazardous areas with danger of explosions exist. Some examples could be in the pharmaceutical industry, chemical industry and especially offshore on platforms. In companies, production plants and process facilities explosion hazard may occur during cleaning, refining / distilling, machining, handling and painting etc. Explosions can be caused by arch, sparks and heat, generated by electrical or mechanical components or from static electrical sparks. What we basically do as an engineering company and manufacturer of explosion protected products is to take the ignition source away in the explosion triangle, by moulding, encapsulation and heat limitation. The ATEX standards (European) is made from the IEC standards (International) but is adapted with additional safety to cover the European markets. There are two EU directives for hazardous areas with potentially explosive atmospheres. ATEX directive 94/9 – EU ATEX directive 1999/92/EF (user directive) ATEX comes from the French words: ATmosphères EXplosives IEC Ex standards are based on the worldwide IEC standards and can be accepted all around the world except for areas with own certificate standards. There are several other Hazardous area standards that apply for explosion protection around the world and many countries have their own type of certification, North America – NEC. Russia – GOST. Brazil – Inmetro Etc. There can be other directives that may apply for your application contact us for further information. Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 4

[close]

p. 5

Member of the NIBE Group 94/9/EC Product Markings Typical IEC/CENELEC Product Markings Gas Dust II 2 Explosion Protection Marking Equipment Category (table 1) G D Ex d IIC T6 Gb Explosive Atmosphere Suitability (D - Dust) (Table 1) Type of Protection (Gas) (Table 2) Temperature Class (Gas) (Table 4) Ex t IIIC T80º Db Explosion Marking Explosion Group (Dust) (Table 2) Equipment Protection Level (EPLDust) (Table 1) Equipment Group (table 1) Explosive Atmosphere Suitability (G - Gas, vapour or mist) (Table 1) Explosion Marking Explosion Group (Gas) (Table 3) Equipment Protection Level (EPLGas) (Table 1) Type of Protection (Dust) (Table 2) Max. Surface Temperature (Dust) Table 1. Zone Classification / Equipment Group / Equipment Level Hazardous mixture Period of presence of the flammable substances Zone Classification Necessary Marking for the Equipment Acc. to 94/9/EC Acc. to IEC 60079-0 Equipment Group Category Protection Group Equipment Protection Level EPL Protection Level Gas Mist Vapour Continuously for long periods or frequently Zone 0 II 1 G II Ga Very High Occasional occurrence Zone 1 II 2 G II Gb High Not likely, but if it does occur, only rarely and for a short period Zone 2 II 3 G II Gc Increased Dust Continuously for long periods or frequently Zone 20 Occational oc- Zone 21 currence Not likely, but if it does occur, only rarely and for a short period Zone 22 III 1 D III Da Very High III 2 D III Db High III 3 D III Dc Increased Methane Coal Dust Mining Mining I M1 I Ma Very High I M2 I Mb High Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 5

[close]

p. 6

Table 2. Method of Explosion Protection Electrical Type of Protection for Atmospheres made explosive by gases, vapours and mists Type of Protection Type of Protection Zone / ATEX Category / EPL Protection Concept d Flameproof enclosure Zone 1 or 2 /2G / Gb Contain the explosion, prevent the flame propagation e Increased safety Zone 1 or 2 /2G / Gb No arcs, spartks or hot surfaces ia Intrinsic safety Zone 0, 1 or 2 /1G / Ga Limit the energy of the spark and the surface temperature ib Intrinsic safety Zone 1 or 2 /2G / Gb Limit the energy of the spark and the surface temperature ic Intrinsic safety Zone 2 /3G / Gc Limit the energy of the spark and the surface temperature ma Encapsulation Zone 0, 1 or 2 /1G / Ga Exclusion of Ex-atmosphere mb Encapsulation Zone 1 or 2 /2G / Gb Exclusion of Ex-atmosphere mc Encapsulation Zone 2 /3G / Gc Exclusion of Ex-atmosphere nA Non-sparking Zone 2 /3G / Gc No arcs, sparks or hot surfaces nC Enclosed break Zone 2 /3G / Gc Prevent the flame propagation nR Restricted breathing Zone 2 /3G / Gc Protection by enclosure o Oil immersion Zone 1 or 2 /2G / Gb Exclusion of Ex-atmosphere q Powder filling Zone 1 or 2 /2G / Gb Prevent the flame propagation Type of Protetion ia ib ic ma mb mc p t Electrical Type of Protedtion for Atmospheres made explosive by dusts Type of Protection Zone / ATEX Category / EPL Protection Concept Intrinsic safety Zone 20, 21or 22 / 1D / Da Limit the surface temperature Intrinsic safety Zone 21 or 22 / 2D /Db Limit the surface temperature Intrinsic safety Zone 22 / 3D / Dc Limit the surface temperature Encapsulation Zone 20, 21 or 22 / 1D / Da Exclusion of Ex-atmosphere Encapsulation Zone 21 or 22 / 2D / Db Exclusion of Ex-atmosphere Encapsulation Zone 22 / 2D / Dc Exclusion of Ex-atmosphere Pressurized Zone 22 / 3D / Dc Exclusion of Ex-atmosphere Proteciton by enclosure Zone 20, 21 or 22 / 1D, 2D, or 3D / Da, Db, Dc Keep the combustible dust out and avoid hot surfaces Table 3. Gas Groups Gas Groups IIA Acetone, Ethane, Benzene, Petrol, Butan, Propane, Methanee IIB Ethylene, Town Gas IIC Hydrogen, acetylene Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 6

[close]

p. 7

Table 4. Temperature Classes Temperature Maximum class Surface Temperature T1 ≤ 450ºC T2 ≤ 300ºC T3 ≤ 200ºC T4 ≤ 135ºC T5 ≤ 100ºC T6 ≤ 85ºC Maximum Permitable Surface Temperature for Permanent Hot Surfaces 440ºC 290ºC 195ºC 130ºC 95ºC 80ºC Table 5. IP Protection IP Protection IEC/EN 60529 First digit Second digit Degrees of protection against solid Degrees of protection against water foreign objects 0 Non-protected Non-protected 1 Protected against solid foreign objects Protected against vertically falling of 50mm Ø and greater water drops (condensation) 2 Protected against solid foreign objects Protected against vertically falling of 12.5 mm Ø and greater water drops when enclosure tilted up to 15º 3 Protected against solid foreign objects Protected against spraying water, up of 2.5mm Ø and greater to 60º angle 4 Protected against solid foreign objects Protected against splashing water from of 1.0mm Ø and greater any direction 5 Dust-protected Protected against water jets from any direction 6 Dust-tight Protected against powerful water jets from any direction 7 Protected against the effects of temporary immersion into water 8 Protected against the effects of continuous immersion of water Example: IP 54 dust proof / protected against spraying water from any direction. Member of the NIBE Group Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 7

[close]

p. 8

Outer jacket Selfregulating parallel heating cable Type ELSR-N up to 80°C Praolutemcitniviuem foil Trpi-rpwoltiareetcestdivceoepaprethr Insulation Sehlefraetginuglaetilnegment Bu1s.2w3mirem2 • Self-regulating • Four nominal outputs • Can be cut to length from the roll • Moisture proof • UV-resistant For example, the ELSR-N heating cable is used for frost protection on emergency water tanks, to maintain constant temperatures for caustic soda and for heating liquid level displays. If you wish to get to know the diverse fields of application for this heating cable, ask us... Applications: The ELSR-N is our “standard” self-regulating heating cable for use in industry and house construction market. The applications range from frost protection to temperature maintenance for pipes and receptacles. We also have suitable designs for the hazardous area. We offer our “classic” in the ELSR-N-BOT variant, also with a fluoropolymer outer jacket (more commonly known as Teflon). This heating cable even withstands aggressive chemicals, oil and fuel - simply indestructible! Technical Data: Outer jacket...................................................................... TPE-O Bus wire............................................................ Cu nickel-plated Maximum exposure temperature (deenergized).................80°C Maximum exposure temperature (energized).....................65°C Nominal voltage..................................................................230V Bending radius minimum..................................................25mm Minimum installation temperature..................................... -50°C Atex approval.Ex II 2 G Ex e II II Ex 2 D Ex tD A21 TMAX 80°C Type Nom. output at 10°C (W/m) ELSR-N-10-2-AO ELSR-N-10-2-BO ELSR-N-10-2-BOT ELSR-N-20-2-AO ELSR-N-20-2-BO ELSR-N-20-2-BOT ELSR-N-30-2-AO ELSR-N-30-2-BO ELSR-N-30-2-BOT ELSR-N-40-2-AO ELSR-N-40-2-BO ELSR-N-40-2-BOT 10 10 10 20 20 20 30 30 30 40 40 40 Design: BO: AO: BOT: Protective braiding and a thermoplastic outer jacket Aluminium foil and a thermoplastic outer jacket Protective braiding and a fluorpolymer outer jacket Dimensions approx. (mm) 13.6x5.5 14.1x5.8 13.8x5.6 13.6x5.5 14.1x5.8 13.8x5.6 13.6x5.5 14.1x5.8 13.8x5.6 13.6x5.5 14.1x5.8 13.8x5.6 Weight approx. (g/m) 91 108 108 91 108 108 91 108 108 91 108 108 Part no. 3660050 3660109 3660110 3660053 3660209 3660120 3660056 3660309 3660130 3660059 3660409 3660140 Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 8

[close]

p. 9

Heating output [W/m] 1.t2in3nmemd ²cboupspewrire Sehlefraetginuglaetilnegment Member of the NIBE Group Selfregulating parallel heating cable Type ELSR-N up to 80°C Insulation Trpi-rpoltaetcetdive braiding Outer jacket ELSR-N-...-2 output (on insulated metallic pipes in accordance with EN 62395-1) 70 60 50 40 30 ELSERL-SNRE-L-2NS0R--32-0N--240-2 20 ELSR-N-10-2 10 0 –30 –20 –10 0 10 20 30 40 50 60 Pipe temperature [0C] Heating curcuit lengths ELSR-N-...-2 considering • 230V nominal voltage • Delayed action circuit breakers (C-characteristic) with 80 per cent maximum load • Maximum 10 per cent line voltage drop on the heating cable bus wire • A (1) single end power input heating cable into consideration Switch-on temp. °C +10ºC 0°C -10˚C -20°C -40°C Nominal cutout value A 16 20 25 16 20 25 16 20 25 16 20 25 16 20 25 Heating circuit length (m) for ELSR-N10-2 177.0 177.0 177.0 160.0 160.0 160.0 144.0 149.0 149.0 125.0 139.0 139.0 99.0 124.0 124.0 ELSR-N20-2 109.0 129.0 129.0 92.0 115.0 119.0 79.0 99.0 111.0 70.0 87.0 104.0 56.0 71.0 88.0 ELSR-N30-2 83.0 104.0 113.0 71.0 89.0 105.0 63.0 78.0 98.0 56.0 69.0 87.0 45.0 57.0 71.0 ELSR-N40-2 57.0 71.0 89.0 50.0 62.0 78.0 44.0 55.0 69.0 40.0 50.0 62.0 33.0 42.0 52.0 Termination Kit ELSR-N-10/20 ELSR-N-30/40 ELSR-N-10/20 ELSR-N-30/40 ELSR-N-10/20/30/40 Description For box PG16 For box PG16 For box M25 For box M25 For cold cable Part no. 7399101 7399106 7399114 7399116 7399108 EX-termination Kit ELSR-N-10/20 ELSR-N-30/40 ELSR-N-10/20 ELSR-N-30/40 Description Complete w/M20 brass gland Complete w/M20 brass gland Complete w/M20 plastic gland Complete w/M25 plastic gland Part no. 7399030 7399032 7399034 7399036 Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 9

[close]

p. 10

Ooputitoenrajlacket. Selfregulating heating tape Type GTe up to 85°C Tibnrnaeidd copper Thtoemrmeor pinlassutliactieolnas- Sesmelfi--climonitdinugctmivaetrix. 1.p1emrmbu² sCwopir-es Roof and gutter protection from snow and ice build up • Automatically adjusts heat output in response to changes in ambient temperature • Can be cut-to-length with no wastage • Will not overheat or burnout, even when overlapped • Full range of accessories available • Optional fluoropolymer outer jacket for use in corrosive en- vironments • Available for 110-120VAC and 220-277 VAC Description: Snow that has built up on a roof will start to melt as a result of either exposure to the sun or from heat rising from the building below. As the melted snow runs from the roof into cold gutters and drain pipes, it can re-freeze forming layers of ice that can continue to build up until the flow is blocked. This can result in damaged drains and gutters. In addition, water can get into the roof and walls of the building, leading to expensive structural damage such as broken roof tiles, damaged plaster and facades, etc. The Solution We have the solution in the form of G-Trace. The self-regulating characteristics of the heating tape means that the cable can adjust it’s heat output in accordance with the ambient temperature. In snow and icy water, the heating cable operates at full power. As the snow melts and the water drains away, GTrace self-regulates to half power while it dries. As it gets warmer, so G-Trace gradually reduces it’s output. The G-Trace system is safe and reliable. As self-regulation prevents overheating, G-Trace can even be installed in plastic gutters and with the UV resistant outer jacket, the heating cable is protected from the sun’s harmful rays – thus making it totally durable and reliable. G-Trace provides a cost effective, preventive maintenance solution to damaged roof tops and gutters and the system consumes no more power than it takes to prevent ice formation. Design and installation of a G-Trace system is simple as there are no fixed lengths. The heating tape can be cut to length during installation. G-Trace is cut off the reel and placed in the gutter. The heating tape is hung down into the down pipe without the need for spacers. All systems - from the simplest to the most elaborate – use the same components, thereby providing maximum flexibility and ease of design. Max temperature.................................................................85ºC Minimum installation temp................................................ -40ºC ........................................................................(CENEL -20°C) Power supply................................... 110-120VAC, 220-277VAC Max. resistance of protective braiding..................18.2 Ohm/km Weight & dimensions Type Ref Nom. Dims. (mm) GTe 10.5 x 5.9 Weight kg/100m 10.0 Min. bending radius 35mm Power Output In ice at 0°C..................................................................... 36W/m In air at 0°C..................................................................... 18W/m Cold Start Data (300 Second Rating) Start at °C Start Current (A/m) 230V -20°C 0.272 0°C 0.212 +10°C 0.180 Accessories We supply a complete range of accessories including termination/splice kits, end seals, junction boxes and controls. THese items are recommended for the correct operation of G-Trace heaters. 10 Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13

[close]

p. 11

1.p1emrmbu² sCwopir-es Sesmelfi--climonitdinugctmivaetrix. Member of the NIBE Group Selfregulating heating tape Type GTe up to 85°C Thtoemrmeor pinlassutliactieolnas- Tibnrnaeidd copper Ooputitoenrajlacket. Maximum Length (m) vs. Circuit breaker size The following circuit details relate specifically to the trace heating of pipework and equipment. For any other application consult SAN. Cat Start-up 230V Ref Temp. 6A 10A 16A 20A 30A GTe 10ºC 34 56 88 92 - 0ºC 28 48 76 92 - -20ºC 22 36 58 74 92 For use with Type C circuit breakers to IEC60898:1991 Thermal ratings Nominal output at rated voltage. Power Output Multiplying Factors 230V Heating Tape 200V Multiply output by 0.91 208V Multiply output by 0.93 220V Multiply output by 0.97 230V Multiply output by 1.00 240V Multiply output by 1.03 250V Multiply output by 1.06 277V Multilply output by 1.15 Notes: 1. In snow and ice water, the heating tape will operate at full power. 2. As the snow begins to melt and the water drains away, the heating tape self-regulates to half power while it dries. 3. As it gets warmer, the heating tape will reduce its power output. Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 11

[close]

p. 12

Overjacket Selfregulating heating tape Type ELSR-H up to 210°C Prtointneecdtivceobprpaeidr , Insulation Sehlefraetginuglaetilnegment 1.b2u3smwmi²re High Temperature The versatile self-regulating heating cable ELSR-H is for high temperatures up to 210 °C in a large number of industrial applications. It also suited and approved for use in hazardous areas. The BOT version of this heating cable even withstands aggressive chemicals, oil and fuel and, thanks to this high chemical resistance, stands out for a long life span. Applications: • Chemical & petrochemical industries • Oil & gas industry • Power plants • Ex-areas • Frost protection • Water & sanitation utilities • Temperature maintenance on vessels, pipes & valves • Up to 120 °C/210 °C • Self-regulating • Six nominal outputs • Can be cut to length off the roll • Moisture proof • Resistant to chemicals • Approved for use in hazardous areas IMPORTANT! This cable can be produced and delivered for hazardous areas (Ex-area, with ATEX certificate) - please state when ordering. Technical Data Outer jacket...........................................................Flouropolymer Bus wire...................................................... nickel-plated copper Maximum exposure temperature (deenergized)............... 210°C Maximum operating temperature (energized)................... 120°C Nominal voltage....................................................... 230V/120V* (*upon request) Minimum installationtemp................................................. -45°C Minimum bending radius.................................................. 25mm Classification..................... II 2G Ex e IIC Gb II 2D Ex tb IIIC Db Certificate.................................................... IECEx EPS 12.0004 Type Nom. loading at 10°C (W/m) ELSR-H-10-2-BOT ELSR-H-15-2-BOT ELSR-H 20-2-BOT ELSR-H 30-2-BOT ELSR-H 45-2-BOT ELSR-H 60-2-BOT 10 15 20 30 45 60 BOT: Protective braiding and a fluoropolymer outer jacket. Dimensions (mm) 12,4x5,0 12,4x5,0 12.4x5.0 12.4x5.0 12.4x5.0 12.4x5.0 Weight approx. (g/m) 120 120 120 120 120 120 Part no. 3663020 3663030 3663045 3663060 Termination Kit ELSR-H-10/20/30/45/602-BOT ELSR-H-10/20/30/45/602-BOT Description w/plastic gland M25 For cold cable Part no. 7399021 7399108 EX-termination Kit ELSR-H-10/20/30/45/602-BOT Description w/2 brass gland M20 for 2 boxes with earth Part no. 7399020 12 Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13

[close]

p. 13

1.b2u3smwmi²re Sehlefraetginuglaetilnegment Insulation Member of the NIBE Group Selfregulating heating tape Type ELSR-H up to 210°C Prtointneecdtivceobprpaeidr , Outer jacket Heating output [W/m] ELSR-H output (on insulated metallic pipes in accordance with EN 62395-1) 70 60 50 ELSR-H 60 40 ELSR-H 45 30 ELSR-H 30 20 10 EEELLLSSSRRR---HHH112050 Heating circuit lengths ELSR-H-...-2-BOT on the following conditions: • 230V nominal voltage • Delayed action circuit breakers (C-characteristic) with 80 per cent maximum load • Maximum 10 per cent line voltage drop on the heating cable bus wire • A (1) single end power input heating cable into consideration Switchon temp. (°C) 10 0 -10 -20 -25 Nominal cutout value (A) 16 20 25 32 16 20 25 32 16 20 25 32 16 20 25 32 16 20 25 32 Heating circuit length (m) for at 230V ELSR- ELSR- ELSR- ELSR- ELSR- ELSRH-10 H-15 H-20 H-30 H-45 H-60 193.0 193.0 193.0 193.0 189.0 189.0 189.0 189.0 184.0 184.0 184.0 184.0 180.0 180.0 180.0 180.0 173.0 173.0 173.0 173.0 158.0 158.0 158.0 158.0 153.0 153.0 153.0 153.0 146.0 148.5 148.5 148.5 139.0 145.0 145.0 145.0 126.0 138.0 138.0 138.0 122.0 136.0 136.0 136.0 116.0 132.0 132.0 132.0 110.0 129.0 129.0 129.0 104.0 125.5 125.5 125.5 95.0 119.0 120.0 120.0 82.0 102.0 111.0 111.0 77.0 97.0 108.0 108.0 73.0 92.0 105.5 105.5 70.0 87.0 103.0 103.0 64.0 80.0 98.0 98.0 55.0 68.0 85.0 91.0 52.0 65.0 81.0 88.5 50.0 62.0 77.0 86.5 47.0 59.0 74.0 84.5 43.0 54.0 68.0 81.0 41.0 51.0 64.0 79.0 39.0 49.0 61.0 77.0 37.0 46.0 58.0 70.0 36.0 44.0 56.0 67.0 33.0 41.0 51.0 61.0 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Pipe temperature (°C). Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 13

[close]

p. 14

Ocpotoirour(-notSeasr)lioojanrcr(k-eeFst)i.sting Selfregulating heating tape Type FS+ up to 225°C* M(e-Cta)l braid Omr c(e-oAtan)ltijnaucokuest Sielilceocntreicraulbinbseurlation Inpheererraegtnuutlrlayetitnseagmfem- saetrlfix- Bus wires A high temperature self-regulating heating cable. • 225°C exposure temperature withstand, (energised or switched off). • Inherently temperature-safe. (ITS) • Power outputs to 60W/m at 10°C • External temperature controls not necessary Description: FS+ is a high temperature self-regulating heating cable, having an exposure limit of 225ºC, energised or not. It may be provided with a continuous extruded metal jacket for applications where high mechanical strength is required or a metal braid where flexibility is preferred. The continuous metal outer jacket is ductile, yet withstands high mechanical loads, thus averting damage when being installed in arduous environments. Easy terminations, cut-to-length. Safest ever self-regulating product range for high temperature exposure; will not overheat even when exposed to 225ºC when energised or switched off as it is inherently temperature-safe. ATEX/IECEx Approved. Maximum continuous exposure temp. (Energised or switched off).................................. 225ºC (437ºF)* Minimum installation temp.....................................-40ºC (-40ºF) Minimum ambient temp.........................................-60°C (-76°F) Power supply..........................................................208-277VAC (other voltages available on request) Weight & dimensions Type Ref Nom. Dims. (mm) FS+A 11.05x5.65 FS+AS 12.05x6.65 FS+AF 11.85x6.45 FS+C 10.25x4.85 FS+CS 11.25x5.85 FS+CF 11.05x5.65 Weight kg/100m 14.3 14.7 14.6 12.2 12.5 12.5 Min. bending radius 20mm 25mm 30mm 20mm 25mm 30mm Gland size M20 M20 M20 M20 M20 M20 Inherently Temperature-Safe: “ The inherent ability to self-regulate at a temperature level below the maximum product rating and withstand temperature of the insulating materials, without the need for temperature control.” Similar competitor self-regulating products are typically limited to a maximum energised temperature, typically 120ºC at which point, their retained power output prevent the cable from self-regulating at its own limiting temperatures. All such products require temperature control to ensure their own temperature safety. Approval details ATEX Sira 12ATEX3136 IECEx SIR 12.0054 EN60079-0:2009 EN60079-7:2007 EN60079-30:2007 IEC d60079-31:2008 IEC 60079-0:2011 IEC 60079-30:2007-01 IEC 60079-31:2008 14 Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13

[close]

p. 15

Bus wires Inpheererraegtnuutlrlayetitnseagmfem- saetrlfix- Member of the NIBE Group Selfregulating heating tape Sielilceocntreicraulbinbseurlation Type FS+ Comn(e-tAtina)ul joaucsket orm(e-Cta)l braid up to 225°C* Ocpotoirour(-notSeasr)lioojanrcr(k-eeFst)i.sting Maximum Length (m) vs. Circuit breaker size The following circuit details relate specifically to the trace heating of pipework and equipment. For any other application consult SAN. Cat Start-up 230V Ref Temp. 20A 32A 15FS+ 10ºC 154 - 30FS+ 10ºC 102 108 45FS+ 10ºC 76 88 60FS+ 10ºC 62 76 For use with Type C circuit breakers to IEC60898 Thermal ratings Nominal output @ 230V when FS+ is installed on thermal insulated carbon steel pipes, being fixed with aluminium fixing tape. Gillelejevej 30b - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - info@san-as.com - www.san-as.com CVR No.: 42 16 59 13 15

[close]

Comments

no comments yet