SAN Air Heating

 

Embed or link this publication

Description

SAN Air Heating Brochure

Popular Pages


p. 1

Air Heating

[close]

p. 2

Table of Contents Page Air Heating: Portable Stationary mounting Gate/door (air curtains) ........................................................................................................................... 3 ........................................................................................................................... 6 ........................................................................................................................... 8 Electrical heaters for duct heating: Electrical heaters, round ducts........................................................................................................................ 10 Insertion heaters ........................................................................................................................... 11 Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 2 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 3

Member of the NIBE Group Portable Hot Air Fans Type TEA Type TEA is used for heating of bigger rooms. It has 3 heating levels, protection class IP 44 and is delivered with 2 m cable. It is equipped with 2 limiters, one with automatic reset, one with manual reset. The fan has a built-in overheating fuse, which automatically starts the fan after over-heating. Type TEA 15-32 can all be connected in 3 levels. TEA 40 can be connected in 4 levels. Type TEA 15 TEA 26 TEA 32 TEA 40 Power kW 15 26 32 40 Voltage V 3x400 3x400 3x400 3x400 Current Amp 22 38 47 59 Air volume m3/h 1300 2900 2900 2900 Δt °C 33 25 33 40 Weight kg 17 30 32 34 Part no. 83400 83402 83404 83406 For rooms with danger of fire Type BSP Type BSP is especially designed for use in rooms with minor danger of fire. This can e.g. be farming, carpenter's and joiner's workshops. Not applicable for rooms containing huge masses of dust. NON EX. Technical data: Protection class: IP 54. The fan is protected by a thermo release, which switches off the fan and heating elements. The heating elements are protected against overheating by a limiter. Type BSP is equipped with no-voltage release. At drop outs the hot air fan can only be started manually by a push button. Lowest distance to flamable material: 1.0 m. Delivered with 10 m rubber cable and plug. Type BSP is also available for stationary mounting Type BSP 2 BSP 4 BSP 6 BSP 9 Power kW 2 4.5 6 9 Voltage V 230 3x400 3x400 3x400 Current Amp 9 7 9 13 Air volume m3/h 400 950 950 1300 Δt °C 14 14 18 21 Weight kg 6 15 16 17 Part no. 83335 83336 83337 83338 Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 3

[close]

p. 4

UL Fan Heater 3kW-9kW Description This fan heater is a rigid and reliable fan heater designed for harsh weather and rough environments, where fine materials and high performance are required for nacelle heating and others. The fan heater is performing superbly down to -40ºC and in high altitude. This heater is therefore the perfect choice for high quality wind turbines in cold climate conditions. The technology has been used successfully for more than 15 years and ongoing development secures that these products still perform as quality units in the next generation of turbines. The UL approved heaters can be supplied from 3-9kW as standard. The heater is supplied with wall bracket. Technical Data A limiter is installed for safety against overheating. The fan heater is designed with an inner round shell which ensures that the entire air flow passes over the heating elements. In this way problems with cold areas and stagging airflow are avoided. The fan heater is supplied in different voltages, therefore all types are available from 240 V - 600 V. NEMA 2 cover. Coating The fan heater is made of electrogalvanized steel plates coated with a 20 my coating in RAL 7004 (light grey). When ordering large quantities the fan heaters can be supplied in other colours. Permanent Installation Using the wall bracket the fan heater can be mounted vertically or in a 15° angle. Electrical Installation Permanent installation must be carried out by an authorised electrician in compliance with current regulations. kW 3 4,5 3 6 3 6 9 3 6 9 3 6 9 Volt 240 240 3x240 3x240 3x400 3x400 3x400 3x480 3x480 3x480 3x600 3x600 3x600 Amp 12,5 18,8 7,2 14,4 4,3 8,7 13,0 3,6 7,2 10,8 2,9 5,8 8,7 m3/h 450 650 450 650 450 650 800 450 650 800 450 650 800 ΔT 19ºC 20ºC 19ºC 28ºC 19ºC 28ºC 32ºC 19ºC 28ºC 32ºC 19ºC 28ºC 32ºC dB(A) 35 42 35 42 35 42 45 35 42 45 35 42 45 Part no. 69825309 69825090 69825308 69825307 69825306 69825305 69825304 69825303 69825302 69825099 69825301 69825300 69825089 Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 4 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 5

Member of the NIBE Group Fan Heater 3kW-21kW Description This fan heater is a rigid and reliable fan heater designed for harsh weather and rough environments, where fine materials and high performance are required for nacelle heating and others. The fan heater is performing superbly down to -40ºC and in high altitude. This heater is therefore the perfect choice for high quality wind turbines in cold climate conditions. The technology has been used successfully for more than 15 years and ongoing development secures that these products still perform as quality units in the next generation of turbines. Technical Data The fan heater is supplied with a 0 - 40°C thermostat which ensures an optimum service and minimises the electrical consumption. A limiter is also installed for safety against over heating. The fan heater is designed with an inner round shell which ensures that the entire air flow passes over the heating elements. In this way problems with cold areas and stagging airflow are avoided. The fan heater can be delivered in different voltages 110V - 690V. Degree of protection: IPx4. Options • can be delivered with different wall bracket systems. • can be delivered with different cable lengths. Coating 373 419 320 299 The fan heater is made of electrogalvanized steel plates coated with a 20 my coating in RAL 7004 (light grey). When ordering large quantities the fan heaters can be supplied in other colours. Electrical Installation Permanent installation must be carried out by an authorised electrician in compliance with current regulations. 322.5 70 70 73.5 373 320 299 419 444.5 373 320 299 419 139 70 70 322.5 70 70 444.5 B Routine high voltage test Description : 1250V 70 B Volt 2300-40°C thermostat 3x400/690 3x400/690 3x400/690 3x400/690 3x400/690 165°C cut out 70 139 kW 3 3 6 9 15 B Routine high voltage test m3/h 450 450 650 800 1400 B : 1250V 322.5 444.5 ΔT 19ºC 19ºC 28ºC 32ºC 30ºC 42ºC SAN 70 °C thermostat C cut out 73.5 dB(A) 35 35 42 45 52 52 SAN 3000 3000 6000 B : 1250V 9000 15000* 21000* tage 21 1400 *Dimensions have to be informed. Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 70 5

[close]

p. 6

SAN Hot Air Fan Application: Hot air fan for heating and temperature maintenance in the nacelle. All equipment is delivered approved according to international standards, including corrosion-, shock- and vibration tests. Technical data: Output: Voltage: Volume of gas: Op. temperature: Casing: Composition: Part No.: 5-50kW 110 - 3x690V 7m/s -40 to +55°C IP 55 Stainless steel 10kW: 217252001 5kW: 207406001 and 207406002 Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 6 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 7

Member of the NIBE Group SAN Air Heater for wind turbines Description: SAN special designed air heater for frost protection in wind turbines manufactured from galvanized steel consisting of a hexagon duct with forced ventilation from a built-on fan. The terminal box is made from painted steel, with enclosure IP65, containing electrical components and terminations. The heater unit has heavy mounting fixtures in galvanized steel mounted to the surface for fixture in the right position in the wind turbine. The built-in heating elements are made from stainless steel AISI 316Ti and bent into shape to secure perfect heat transportation from the heating element into the air. The air heater is overheat protected by an adjustable limiter with reset located near the surface of the heating elements. All equipment is approved according to international standards, including corrosion, shock and vibration tests. Technical data: Type I Output Voltage Air flow Temperature range Protection class Casing Motor rpm 5kW 3x690V 2500m3/h -40 to +55°C IP65 Galvanized steel 1380 Type II 10kW 3x690V 2500m3/h -40 to +50°C IP65 Galvanized steel 1380 Optional 2,5kW - 50kW 3x400V - 3x690V 800m3/h IP65 Galvanized/Stainless steel 750 - 3000 -40 to +50°C Application: Nacelle heating - Tower heating Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 7

[close]

p. 8

Air Curtains Type LPX, LSK SAN hot air curtains is especially designed for use over front doors and smaller gates, but is also applicable for many other applications, e.g. for heating and drying in the industry. Delivered with power from 2 kW to 10 kW, where the 2 kW type, LPX 2, is especially applicable for minor openings, such as e.g. hot-dog stands, serving hatches etc. Description of type LPX2 Manufactured from galvanized steel plate with drum fan and stainless pipe heating elements. 2-level switches for air volume and power (1/2 - 1/1). Thermostat and thermo relay with manual reset (behind the front cover). 2 m wire with plug. Protection class: IP 20. Sound level: 40/48 dB. Thermostat: 5°C-35°C. Colour: RAL 9010 (white). Voltage: 230 V. Width: 800 mm. For use at front doors, e.g. in airports, gas stations etc. the heavier types, LSK are recommended. At wide door openings, e.g. at malls or industrial gates, the type RA is recommended. Description of type LSK Manufactured from galvanized steel plate with drum fan and stainless tubular heating elements. Equipped with complete adjustment: 0 - vent. - heating level 1 + 2, thermostat 0°C-40°C and 2 limiters. Protection class: IP 20. Sound level: 42/53 dB(A). Colour: RAL 9010 (white). Voltage: 3x400 V Type LSK = 1 m wide. Type LSD = 1.5 m wide. H: 270 mm, D: 240 mm. Type LPX 2 LSK 3 LSK 6 LSK 9 Power kW 2 3 6 9 Air volume m3/h 230/460 900/1200 900/1200 900/1200 ΔT °C 25/13 10/7 19/4 29/21 Weight 9 15 15 15 Part no. 83339 83340 83341 83342 For type LSK - LSD a remote control box can be delivered, which can adjust up to 6 hot air blankets. Temperature control still on each unit. BB Separate control box 83339 Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 8 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 9

Member of the NIBE Group Air Curtains Type RA Description In principle the type RA recirculates the existing, heated air in the room, which is let out through adjustable plates at high speed. This way an ef-fective air stop is obtained and at the same time the temperature difference between ceiling and floor is equallized. Type RA can also be delivered with heating unit, either for central heating (up to 69 kW) or with electrical surface (up to 36 kW). It is neccessary to dimension type RA depending on the actual assignment. Please contact our sales department. Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 9

[close]

p. 10

Electrical Heaters for duct heating SAN round electrical heaters have been designed for building-into spiro ducts. They are manufactured from hot galvanized steel plate mounted with stainless steel tubular heating elements and equipped with terminal box with BK gland for each group. With built-in temperature limit type TGS 140ºC with manual reset and fire thermostat with automatic reset. Specific watt load : 3 W/cm2 Min. wind velocity : 3 m/sec. Type RVF ELECTRICAL HEATER RVF Type RVF RVF RVF RVF RVF RVF RVF RVF RVF RVF 16/36 16/54 16/72 25/87 25/116 25/145 25/174 315/210 315/280 315/350 Power kW 3.6 5.4 7.2 8.7 11.6 14.5 17.4 21.0 28.0 35.0 Dimensions ØD x L mm 160 160 160 250 250 250 250 315 315 315 x x x x x x x x x x 250 250 250 350 350 350 350 550 550 550 3 x 400 V 55500 55510 55515 55520 55525 55530 55535 55540 55543 55545 Part no. SAN electrical heaters are manufactured from stainless tubular heating elements, mounted in galvanized sheet iron frame with 30 mm flanges and equipped with terminal box and BK gland for each group. With built-in temperature limit type TGS 140°C with manual reset and fire thermostat with automatic reset. Specific watt load : 3 W/cm2 Min. wind velocity : 3 m/sec. ELECTRICAL HEATER FKV Type FKV-3/1 FKV-3/3 FKV-3/5 FKV-3/7 FKV-4/1 FKV-4/3 FKV-4/5 FKV-4/7 FKV-5/1 FKV-5/3 FKV-5/5 Power kW 4.50 50450 6.75 50675 300 x 300 x 300 9.00 50900 18.00 51800 11.25 51125 18.00 51801 400 x 400 x 425 27.00 52700 38.25 53825 24.75 52475 47.25 500 x 500 x 500 54725 76.50 57650 Dimensions H x W x L mm 3 x 400 V Part no. Type FKV Group division according to request. Each group must be multible of 2.25 kW. As tubular heating element, our standard types in stainless and acid proof steel are most often used, however, on demand, tube material MONELL 400, INCOLOY 800, INCONEL 600 or TITANIUM are used. Duct frame is in equal material. Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com 10 CVR No.: 42 16 59 13 - A/S reg. No.: 53 053

[close]

p. 11

Member of the NIBE Group Insertion Heaters Type RKV for duct heating SAN insertion heaters are for mounting in ventilation systems with spiro ducts. FOR TEMPERATURES UP TO MAX. 60ºC. SAN insertion heaters can be mounted and after-mounted on all spiro ducts by means of an application - easily and simple. SAN insertion heater is manufactured from hot galvanized steel plate with normal tight terminal box, with 2 PG 13.5 and terminal box for electrical connection. The heating element is in acid proof, stainless steel Werkstoff-No. 1.4435. SAN insertion heater is equipped with over-heat protection consisting of 1 bimetal thermostat with automatic reset and 1 temperature limit, 1-pole with reset for manual reset in separate thermo well. Insertion heater Bending Spiro duct SAN insertion heater can be reset to 4 different effects. D DEMKO approved. INSERTION HEATERS RKV Type RKV 16 RKV 25 Power W 500/1000/2000 W - 230 V 1500 W - 400 V Part no. 30510 30516 Type RKV 16: ∅160 for mounting in spiro pipe 160 and 200, height = 145 mm Type RKV 25: ∅250 for mounting in spiro pipe 250 and 315, height = 155 mm Air velocity: 500 1000 1500 2000 W W W W - 230 - 230 - 400 - 230 V: V: V: V: min. 0.5 min. 1.0 min. 1.5 min. 2.0 m/sec. m/sec. m/sec. m/sec. Other sizes, power and voltages are delivered according to specification. Gillelejevej 30 - DK-3230 Graested - Denmark Tel.: +45 48 39 88 88 - Fax: +45 48 39 88 98 - san@san-as.com - www.san-as.com CVR No.: 42 16 59 13 - A/S reg. No.: 53 053 11

[close]

p. 12

Member of the NIBE Group • • • • • • • • • • • • • • • • Process Heating Heating Elements Heating Cables Finned Tubular Radiators Immersion Heaters Church Heating Frost Protection Ex-Material Oilfilled Radiators Drum Heaters Heating Pads Flow Heaters Air Duct Heaters High-voltage Resistors Controllers With more than 50 years of experience SAN Electro Heat’s most valuable asset is special knowhow about design, product development and manufacturing of professional electrical heating equipment for industrial use. The company is geared to deliver 100% customized products, and thus functions both as a catalyst for a development project and as supplier of the final product. At the same time we insure and maintain the required quality level, mechanical and electrical dimensioning, approvals and documentation. Denmark, Mainoffice: Gillelejevej 30b DK-3230 Graested info@san-as.com tel.: +45 4839 8888 fax: +45 4839 8898 UK: Harold Comerford H_comerford@btconnect.com tel.: +44 1432 851999 mobile: +44 7802 853862 Germany: Wolfgang Biehs wolfgang.biehs@nibe.de tel.: +49 6171 887 724 mobile: +49 1622 793 484 www.san-as.com 2014/December 16th

[close]

Comments

no comments yet