p. 1

hd receiver dvd player owner s manual model lst-3510a before connecting operating or adjusting this product please read this instruction manual carefully and completely.

[close]

p. 2

safety precautions caution risk of electric shock do not open note to cable/tv installer this reminder is provided to call the cable tv system installer s attention to article 820-40 of the national electric code u.s.a the code provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of the cable entry as practical regulatory information fcc part 15 this product has been tested and found to comply with the limits for a class b digital device pursuant to part 15 of the fcc rules these limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation this product generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications however there is no guarantee that interference will not occur in a particular installation if this product does cause harmful interference to radio or television reception which can be determined by turning the product off and on the user is encouraged to try to correct the interference by one or more of the following measures reorient or relocate the receiving antenna increase the separation between the product and receiver connect the product into an outlet on a circuit different from that to which the receiver is connected consult the dealer or an experienced radio/tv technician for help caution to reduce the risk of electric shock do not remove cover or back no user-serviceable parts inside refer servicing to qualified service personnel this lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product warning to reduce the risk of fire or electric shock do not expose this product to rain or moisture caution to prevent electric shock match wide blade of plug to wide slot fully insert attention pour Éviter les choc Électriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond warning do not install this equipment in a confined space such as a book case or similar unit caution do not attempt to modify this product in any way without written authorization from zenith electronics corporation unauthorized modification could void the user s authority to operate this product this equipment is intended to receive and decode signals transmitted according to atsc digital television standard a/53 specification and is intended to be used with an appropriate antenna and display device that you must provide otes on copyrights caution this dvd/hdtv receiver employs a laser system to ensure proper use of this product please read this owner s manual carefully and retain for future reference should the unit require maintenance contact an authorized service locationsee service procedure use of controls adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure to prevent direct exposure to laser beam do not try to open the enclosure visible laser radiation when open do not stare into beam caution the apparatus shall not be exposed to water dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus fcc warning this equipment may generate or use radio frequency energy changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual the user could lose the authority to operate this equipment if an unauthorized change or modification is made it is forbidden by law to copy broadcast show broadcast via cable play in public or rent copyright material without permission this product features the copy protection function developed by macrovision copy protection signals are recorded on some discs when recording and playing the pictures of these discs on a vcr the picture noise will appear this product incorporates copyright protection technology that is protected by method claims of certain u.s patents and other intellectual property rights owned by macrovision corporation and other rights owners use of this copyright protection technology must be authorized by macrovision corporation and is intended for home and other limited viewing uses only unless otherwise authorized by macrovision corporation reverse engineering or disassembly is prohibited serial number locate the serial number on the back of the unit this number is only used on this unit you should write in requested information below and retain this guide as a permanent record of your purchase model no serial no date of purchase lst-3510a 2

[close]

p. 3

important safety instructions introduction caution please read and observe all warnings and instructions in this installation and operating guide and those marked on the unit retain this guide for future reference this set has been designed and manufactured to assure personal safety improper use can result in electric shock or fire hazard the safeguards incorporated in this unit will protect you if you observe the following procedures for installation use and servicing this unit does not contain any parts that can be repaired by the user do not remove the cabinet cover or you may be exposed to dangerous voltage refer servicing to qualified service personnel only 1 read these instructions all these safety and operating instructions should be read before the product is operated 2 keep these instructions the safety operating and use instructions should be retained for future reference 3 heed all warnings all warnings on the product and in the operating instructions should be adhered to 4 follow all instructions all operating and use instructions should be followed 5 do not use this apparatus near water ­ for example near a bath tub wash bowl kitchen sink laundry tub in a wet basement near a swimming pool etc 6 clean only with dry cloth ­ unplug this product from the wall outlet before cleaning do not use liquid cleaners 7 do not block any ventilation openings install in accordance with the manufacturer s instructions slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product and to protect it from over heating the openings should never be blocked by placing the product on a bed sofa rug or other similar surface this product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer s instructions have been adhered to 8 do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 do not defeat the safety purpose of the polarized or grounding-type plug a polarized plug has two blades with one wider than the other a grounding type plug has two blades and a third grounding prong the wide blade or the third prong are provided for your safety if the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 12 use only the cart stand tripod bracket or table specified by the manufacturer or sold with apparatus when a cart is used use caution when moving the cart apparatus combination to avoid injury from tip-over 13 unplug this apparatus during lightning storms or when unused for long periods of time 14 refer all servicing to qualified service personnel servicing is required when the apparatus has been damaged in any way such as powersupply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 10 protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 only use attachments/accessories specified by the manufacturer 3

[close]

p. 4

table of contents introduction safety precautions 2 important safety instructions 3 table of contents 4 pre-operation overview 5-6 playable discs 5 precautions 6 notes on discs 6 about symbols 6 front panel controls 7 display window 8 remote control key functions 9 unpacking dvd/hdtv receiver and accessories/connection overview 10 connection panel overview 11 dtv operation program and station guide normal operation channel selection volume adjustment signal 39 40 40 40 40 dvd menu operation dvd on-screen display 41 general explanation 41 on-screen displays 41 initial settings 42-43 initial settings general operation 42 language 42 picture 42 sound 43 others 43 parental control 44 installation connections 12-18 antenna connections 12 analog monitor connections 13 hd monitor component ypbpr connections 14 hd monitor rgb connections 15 hd monitor dvi-hdtv connections 16 vcr connections 17 amplifier receiver connections 18 display format setup 19 dvd operation dvd and video cd operation 45-48 playing a dvd or video cd 45 general features 45-47 special dvd features 47 audio cd and mp3/wma disc operation 48-49 playing an audio cd or mp3/wma disc 48 notes on mp3/wma recordings 48 general features 49 jpeg file operation 50 viewing jpeg files on a disc 50 programmed playback 51 audio cd programmed playback mp3/wma discs 51 video cd programmed playback 51 dvd additional information 52 last condition memory 52 video mode setting 52 hdcd playback 52 dtv menu operation pre-operation setup 20 general operation 20 setup menu options 21-23 ez scan channel search 21 ch edit channel edit 22 dtv signal 22 ez demo 23 channel labels 23 option menu features 24-27 clock 24 menu language 24 audio language 24 aspect ratio 25 choosing the aspect ratio 26 digital audio output 27 caption menu 28-30 caption dtv 28 caption style dtv 29 caption analog 30 lock parental control menu options 31-35 lock system 31 set password 31 block ch channel 32 movie rating 33 tv rating-children 34 tv rating-general 35 guide options 36 program guide 36 station guide 36 information displays 37-38 channel banner display 37 program information display 38 reference programming the remote control to operate other devices 53 remote control codes for other devices 54-55 dtv troubleshooting 56 dvd troubleshooting 57 language code list 58 country code list 59 specifications 60 notes 61-63 warranty back cover about the symbols for instructions indicates hazards likely to cause harm to the unit itself or other material damage indicates special operating features of this unit indicates tips and hints for making the task easier 4

[close]

p. 5

pre-operation overview playable discs dvd 8 cm 12 cm disc video cd vcd 8 cm 12 cm disc audio cd 8 cm 12 cm disc in addition this unit can play hdcd kodak picture cd svcd cd-r or cd-rw that contain audio titles mp3 wma or jpeg files otes ­ depending on the conditions of the recording equipment or the cd-r/rw disc itself some cd-r/rw discs cannot be played on the unit ­ do not attach any seal or label to either side the labeled side or the recorded side of a disc ­ do not use irregularly shaped cds e.g heart-shaped or octagonal the unit may malfunction otes on dvds and video cds some playback operations of dvds and video cds may be intentionally fixed by software manufacturers as this unit plays dvds and video cds according to disc content designed by the software manufacturer some playback features of the unit may not be available or other functions may be added refer also to the instructions supplied with the dvds and video cds some dvds made for business purposes may not be played on the unit regional code of the dvd/hdtv receiver and dvds this dvd/hdtv receiver is designed and manufactured for playback of region 1 encoded dvd software the regional code on the labels of some dvd discs indicates which type of dvd player can play those discs this unit can play only dvd discs labeled 1 or all if you try to play any other discs the message check regional code will appear on the tv screen some dvd discs may not have a region code label even though their playback is prohibited by area limits track video cd and audio cd only sections of a picture or a musical piece on a video cd or an audio cd each track is assigned a track number enabling you to locate the track you want scene on a video cd with pbc playback control functions moving pictures and still pictures are divided into sections called scenes each scene is displayed on the menu display and assigned a scene number enabling you to locate the scene you want a scene is composed of one or several tracks types of video cds there are two types of video cds video cds equipped with pbc version 2.0 pbc playback control functions allow you to interact with the system via menus search functions or other typical computer-like operations moreover still pictures of high resolution can be played if they are included in the disc video cds not equipped with pbc version 1.1 operated in the same way as audio cds these discs allow playback of video pictures as well as sound but they are not equipped with pbc hdcd high definition compatible digital® hdcd® high definition compatible digital® is a recording system that has improved audio cd sound in dynamic range sound field reproducibility and vocal acoustics this dvd/hdtv receiver is equipped with an hdcd decoder the hdcd indicator illuminates when playing an hdcd-encoded audio cd hdcd® high definition compatible digital® and pacific microsonicstm are either registered trademarks or trademarks of pacific microsonics inc in the united states and/or other countries hdcd system manufactured under license from pacific microsonics inc this product is covered by one or more of the following patents united states 5,479,168 5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 5,872,531 and 5,864,311 australia 669114 other patents pending 1 disc-related terms title dvd video discs only the main film content accompanying feature content additional feature content or music album each title is assigned a title reference number enabling you to locate it easily chapter dvd only sections of a picture or a musical piece that are smaller than titles a title is composed of one or several chapters each chapter is assigned a chapter number enabling you to locate the chapter you want depending on the disc chapters may not be recorded as an energy star® partner lg has determined that this product or product models meets the energy star® guidelines for energy efficiency energy star® is a u.s registered mark 5 introduction

[close]

p. 6

pre-operation overview continued precautions handling the unit when shipping the unit the original shipping carton and packing materials come in handy for maximum protection re-pack the unit as it was originally packed at the factory when setting up the unit the picture and sound of a nearby tv vcr or radio may be distorted during playback in this case position the unit away from the tv vcr or radio or turn off the unit after removing the disc to keep the exterior surfaces clean do not use volatile liquids such as insecticide spray near the unit do not leave rubber or plastic products in contact with the unit for a long period of time they will leave marks on the surface cleaning discs fingerprints and dust on the disc can cause poor picture quality and sound distortion before playing clean the disc with a clean cloth wipe the disc from the center out yes no do not use strong solvents such as alcohol benzine thinner commercially available cleaners or anti-static spray intended for older vinyl records about symbols about the symbol display cleaning the unit to clean the cabinet use a soft dry cloth if the surfaces are extremely dirty use a soft cloth lightly moistened with a mild detergent solution do not use strong solvents such as alcohol benzine or thinner as these might damage the surface of the unit to obtain a clear picture the dvd/hdtv receiver is a high-tech precision device if the optical pick-up lens and disc drive parts are dirty or worn the picture quality will be poor regular inspection and maintenance are recommended after every 1,000 hours of use this depends on the operating environment for details please contact your nearest dealer may appear on the tv screen during operation this icon means the function explained in this owner s manual is not available on that specific dvd video disc about the disc symbols for instructions a section whose title has one of the following symbol is applicable only to the disc represented by the symbol dvd dvd vcd2.0 video cds with the pbc function vcd1.1 video cds without the pbc function cd audio cds mp3 mp3 disc wma wma disc jpeg jpeg files notes on discs handling discs do not touch the playback side of the disc hold the disc by the edges so that fingerprints will not get on the surface do not stick paper or tape on the disc selecting the viewing source you must select one of your output sources dtv or dvd to view on the tv screen · first select operational mode of remote control to hd stb/dvd by pressing mode button to use remote control to operate this dvd/hdtv receiver if you want to view dtv output source press dtv/dvd on the remote or front panel until dvd indicator in the display window lights and output source of dtv is viewed on the tv screen storing discs after playing store the disc in its case do not expose the disc to direct sunlight or sources of heat or leave it in a parked car exposed to direct sunlight as there may be a considerable temperature increase inside the car · if you press ch while the dvd/hdtv receiver is in the dvd mode the dvd/hdtv receiver will switch to dtv function mode automatically if you want to view dvd deck output source press dtv/dvd on the remote or front panel until dvd indicator in the display window lights and output source of dvd deck is viewed on the tv screen · if you insert a disc or press play when a disc in inserted in the dvd deck while the dvd/vcr receiver is in the dvd mode the dvd/vcr receiver will switch to dvd function mode automatically 6

[close]

p. 7

front panel controls forward skip/scan m go to next chapter/track press and hold for two seconds for a fast forward search reverse skip/scan m go to beginning of current chapter/track or to previous chapter/track press and hold for two seconds for a fast reverse search stop x stops playback p/step x c pause playback temporarily press repeatedly for frame-by-frame playback play n starts playback open/close z opens or closes the disc tray power turns the dvd/hdtv receiver on or off dtv/dvd select one of your output sources to view on the tv screen between dtv and dvd display format sets the output resolution to 1080i 720p 480p or 480i formats and chooses the correct display format for your tv refer to page 19 display window remote control sensor receives signals from the remote control menu/setup shows the main menu on the screen you can return to normal viewing by pressing the exit button on the remote control select if the main menu is displayed pressing the select button will activate the selected menu option if the select button is pressed while you are in normal viewing the channel banner will be displayed v arrow buttons v v b b ch ­ vol ­ allow you to navigate on-screen menus and to adjust the system settings and preferences use the arrow keys to move to a menu option and then use the select button to access it if no menu is displayed the left/right arrows control the volume setting and the up/down arrows select channels 7 introduction

[close]

p. 8

display window dvd indicates this unit s operational mode is set to dvd dtv indicates this unit s operational mode is set to dtv cd audio cd inserted vcd video cd inserted svcd svcd inserted mp3 mp3 or wma disc inserted hd cd hdcd disc inserted prog programmed playback active random random playback active angle available dvd d tv s vcd hd cd mp3 title chp trk random prog dts repeat all a b 1080i 720p 480p 480i dvi rgb ypbpr connection indicator indicates output connection character indicators indicates channel number volume level title number chapter number track number total playing time/elapsed time etc resolution indicator indicates output resolution standby indicator lights when the dvd/hdtv receiver is turned off indicates repeat mode indicates encoding format of the current disc is dts 8

[close]

p. 9

remote control key functions dtv/dvd tv/input select one of your output sources to view on the tv screen between dtv and dvd to select the tv s source tuner or aux a/v input ratio changes the picture aspect ratio guide brings up the program guide surf tunes to your surf channels signal shows the signal strength of the current channel info shows the current station and program information on the screen flashbk returns to the last channel viewed dash enters a channel number for multiple program channels such as 2-1 2-2 etc open/close opens and closes the disc tray stop x stops playback pause/step x pauses playback temporarily press repeatedly for frame-by-frame playback n play n starts playback menu/setup accesses or closes main menu exit removes all on-screen displays and returns to tv viewing from any menu display accesses on-screen display disc menu accesses menu on a dvd disc title displays the discs title menu if available marker marks any point during playback search displays marker search menu angle selects a dvd camera angle if available program enters exits the program edit mode mode indicator indicates the remote control operational mode power turns the dvd/hdtv receiver on and off numbers chooses channels and enters programming information mute turns sound on and off cc/subtitle selects caption mode or subtitle language if available vol volume ­ changes volume ch channel selects a memorized channels audio selects program s audio language options selects an audio language dvd or an audio channel cd forward scan/skip search forward go to next chapter or track reverse scan/skip search backward go to beginning of current chapter or track or go to previous chapter or track press and hold button for about two seconds v arrow buttons v v b b select menu options select completes the channel number input and promptly tunes to selected channel acknowledges menu selection return removes the setup menu displays the menu of a video cd with pbc repeat repeat chapter track title all a-b repeat sequence random plays tracks in random order zoom enlarges video image 9 introduction mode selects operational mode of remote control.

[close]

p. 10

unpacking dvd/hdtv receiver and accessories/connection overview make sure you have received all the accessories listed below with the high definition television receiver hdtv receiver dvd player the dvd/hdtv receiver is capable of receiving signals from cable and/or over-the-air antenna sources and sending the signals to your tv included with the receiver are the following accessories audio cable/video cable/componentypbpr cable rf cable remote control and 2 aa batteries audio/video jacks and cables the audio/video jacks provide excellent picture and sound quality they are used for making most audio/video connections between components the audio/video jacks may be color coded yellow for video red for right audio and white for left audio if your component has only one input for audio mono connect it to the left white l/mono audio jack on the dvd/hdtv receiver component out jacks and cables component cables are used to connect the dvd/hdtv receiver to an industry standard ypbpr compatible hd monitor green for y blue for pb and red for pr remember to connect the left and right audio cables the ypbpr component jacks carry only the picture signals not the sound ant loop out jack and rf cable ant loop out provides the signal from the ant in rf connection on the dvd/hdtv receiver to the tv remote control in addition to the dvd/hdtv receiver the remote control can be programmed to control many other devices batteries to install the batteries slide open the battery compartment and insert the two aa batteries provided remote control operation range aa aa point the remote control at the remote sensor and press the buttons distance about 23 ft 7 m from the front of the remote sensor angle about 30° in each direction of the front of the remote sensor remote control battery installation detach the battery cover on the rear of the remote control and insert two batteries size aa with and aligned correctly caution do not mix old and new batteries never mix different types of batteries standard alkaline etc 10

[close]

p. 11

connection panel overview ant in connect to hdtv signal source external/internal antenna video out connect to a tv with video inputs component video out connect to a tv with ypbpr inputs digital audio out coaxial connect to digital coaxial audio equipment authorized service only is used only for authorized service purposes ac power cord plug into the power source dvi-hdtv out connect to a tv with dvi connector rgb out connect to a tv with rgb inputs digital audio out optical connect to digital optical audio equipment variable volume audio out left/right connect to a tv amplifier receiver or stereo system you can adjust the volume of this audio out on dvd/hdtv receiver fixed volume audio out left/right connect to a tv amplifier receiver or stereo system you can not adjust the volume of this audio out on dvd/hdtv receiver s-video out connect to a tv with s-video inputs ant loop out rf output to tv s antenna in jack or other devices do not touch the inner pins of the jacks on the rear panel electrostatic discharge may cause permanent damage to the unit 11 introduction

[close]

p. 12

connections antenna connections 1 connect the antenna to the ant in jack on the dvd/hdtv receiver using a coaxial rf cable ote there might be some areas where the signal strength could be too high if so you may need to connect the antenna to the optional attenuator and screw the attenuator onto the ant in jack the ant 2 connectrf cable loop out jack on the dvd/hdtv receiver to the antenna in jack on your tv using a coaxial antenna cable tv wall jack panel tv or other device connection panel antenna input s-video input component video input video input audio input pr pb yllr or or attenuator not supplied dvd/hdtv receiver connection panel ip before connecting your antenna during initial installation and setup of your dvd/hdtv receiver you may need to install an optional 10 db attenuator to the antenna input ant in on the lst-3510a the lst-3510a is a high performance high-gain system intended for operation under normal and weak signal conditions providing the best reception with its optimum gain however there might be some reception areas where the signal strength is too high e.g due to close proximity to an undesirable signal or transmitter so you need an attenuator that lowers the incoming signal strength from the undesirable transmitter to more normal levels this 10 db attenuator should be used only in a reception area where the undesired signal strength is too high one of the possible symptoms would be that after your program/channel search your dvd/hdtv receiver does not find all the local digital terrestrial channels available in your area you can find hdtv channels/content information for your local broadcast area by going to zenith website www.zenith.com and clicking on hdtv program schedule under hdtv please make sure that before deciding to use an optional attenuator device you are using an appropriate and properly aligned uhf/vhf rf terrestrial antenna 12

[close]

p. 13

connections continued display formats overview · the hdtv tuner offers various display formats and multiple video outputs when the hdtv tuner is connected to analog monitor connections antenna tv connection panel cable tv wall jack panel antenna input s-video input video input audio input l r or or dvd/hdtv receiver connection panel 1 connect the antenna/cable to the ant in jack on the dvd/hdtv receiver using a coaxial rf cable ote there might be some areas where the signal strength could be too high if so you may need to connect the antenna to an optional attenuator screw the attenuator onto the ant in jack refer to page 12 the ant 2 connectrf cable loop out jack on the dvd/hdtv receiver to the antenna in jack on your tv using a coaxial out on the dvd/hdtv to the a/v in 3 connect the audiocables and video out jackswith an s-video jack,receiver s-video out jacks on your tv using rca-type if your tv is equipped use the jack 13 installation · · · · a/v systems the hdtv tuner can provide video signal formats 1080i 720p 480p and 480i 1080i 720p 480p and 480i modes are available for component video ypbpr outputs 1080i 720p and 480p modes are available for rgb and dvi outputs 480i mode is available for video s-video and component video outputs the hdtv tuner has two digital audio outputs dolby digital 5.1 and pcm the hdtv tuner sends out a digital audio signal to optical and coaxial audio outputs when digital broadcasts are being received by the hdtv tuner.

[close]

p. 14

connections continued hd monitor component ypbpr connections antenna hd ready tv connection panel cable tv wall jack panel antenna input component video input audio input video input pr pb y l r or dvd/hdtv receiver connection panel 1 connect the antenna/cable to the ant in jack on the dvd/hdtv receiver using a coaxial rf cable ote there might be some areas where the signal strength could be too high if so you may need to connect the antenna to an optional attenuator screw the attenuator onto the ant in jack refer to page 12 the ant 2 connectrf cable loop out jack on the dvd/hdtv receiver to the antenna in jack on your tv using a coaxial dvd/hdtv receiver 3 connect the component out jacks on themust be set to ypbpr to theto component in jacks of your tv using rca-type cables the output selection refer setting the display format on page 19 4 connect the l/r audio out jacks on the dvd/hdtv receiver to the l/r audio in jacks on your tv using rca-type cables ote the component out jacks are useable if 1080i 720p 480p 480i native variable 1 variable 2 or variable 3 display format is selected 14

[close]

p. 15

connections continued hd monitor rgb connections installation 15 antenna cable tv wall jack panel hd ready tv connection panel antenna input s-video input audio input video input rgb input l r or dvd/hdtv receiver connection panel 1 1 connect the antenna/cable to the ant in jack on the dvd/hdtv receiver using a coaxial rf cable ote there might be some areas where the signal strength could be too high if so you may need to connect the antenna to an optional attenuator screw the attenuator onto the ant in jack refer to page 12 the ant 2 connectrf cable loop out jack on the dvd/hdtv receiver to the antenna in jack on your tv using a coaxial the dvd/hdtv receiver the rgb of your using vga-type 3 connectthe rgb out jack on thebe set to rgb refer totosetting the in jack format tv page 19 connector output selection must display on 4 connect the l/r audio out jacks on the dvd/hdtv receiver to the l/r audio in jacks on your tv using rca-type cables otes · the rgb output is useable if 1080i 720p 480p native variable 1 variable 2 or variable 3 display format is selected · rgb signal is not output through the rgb out jack during playing back a dvd which copy protection signals are recorded we recommend that you use component video connection and 480p or 480i resolution.

[close]