p. 1

acid-buster eliminates acid build-up in ac&r systems tm acid scavenging solution · prevents compressor burnout · twice as concentrated as competitive brands · works with all refrigerants and lubricants mineral oil polyol ester and alkyl benzene · compatible with semi-hermetic and hermetic compressors · direct reusable injector systems eliminate the need for an oil pump · easy-to-use cartridges are prefilled and disposable fast and easy acid-buster is a ready-to-use acid scavenging solution that can be injected directly into an air-conditioning or refrigeration system simply connect the injector hose to the system s lowside service port and turn the handle to inject the exact amount of acid-buster required economical using acid-buster is the most cost-effective way to clean up acid build-up in any ac&r system only 1/2 oz of superconcentrated acid-buster is needed to treat one quart of system oil half as much as competitive brands available in ab-100cs ez-jecttm injection kit ab-400cs bigeztm injection kit safe can be used with all ac&r systems including high-pressure r-410a systems won t contaminate the refrigerant or lubricant or leave behind a residue of corrosive salts acid-buster is designed for use in cfc hcfc and hfc refrigerants using mineral oil polyol ester and alkyl benzene lubricants protects against overdosing using an injector and a graduated cartridge lets you introduce the precise amount of acid-buster into the system this helps preserve the integrity of the lubricant competitive products can damage lubricant properties because they require that the entire bottle of acid treatment be used even when only a small portion is needed includes ez-jecttm injector hose assembly with check valve and 1/4 flare low-loss fitting and 2 ab-5cs 0.5 oz 14.8 ml ez-jecttm cartridges filled with acid-buster acid scavenging solution includes bigeztm injector hose assembly with check valve and 1/4 flare low-loss fitting and 1 ab-4cs 4 oz 118 ml bigeztm cartridge filled with acid-buster acid scavenging solution perfect for preventive maintenance standard maintenance procedures for acid build-up problems require performing frequent oil changes to dilute acids or require flushing the entire system periodically to remove acids acidbuster eliminates these expensive and time-consuming methods since it is specially formulated to remain safely in the system replacement acid-buster cartridges ab-5cs ez-jecttm 0.5 oz 14.8 ml cartridge ab-4cs bigeztm 4 oz 118 ml cartridge ab-8 bigeztm 8 oz 237 ml cartridge dosage use 0.5 oz 14.8 ml of acid-buster acid scavenging solution for every 1 qt 946 ml of oil 3 lbs of refrigerant or 1.5 tons of cooling distributed by 4/11 a03007-2 printed in u.s.a.

[close]