p. 1

2011 catalog #180 6620 mcmillan way richmond bc canada v6w1j7 604.232.4445 1.888.swivels 794.8357 fax 604.232.4446 sales@dcddesign.com www.dcddesign.com duct installation proofing section

[close]

p. 2

dcd design manufacturing ltd at dcd design manufacturing ltd we produce high quality cable installation directional drilling and overhead line stringing tools dcd design is driven by our customers needs and by our own commitment to service those customers every effort is made to provide customers with the product they need when they need it we maintain our inventory levels to satisfy 99 of orders without delay and 90 of orders are shipped on the same day from our integrated sales and engineering office we offer the fastest turn-around in the industry to meet your shipping deadlines we are constantly working to supply a high-quality product at a competitive price and to this end all our products are fully tested and come with a six-month guarantee 90 days for horizontal directional drilling products on november 10 2009 we became iso 9001:2008 certified and this emphasizes our commitment to superior product quality and customer service utilities contractors distributors and competitors alike recognize the high standards set by our customer service and the products we manufacture customers realize that help with field problems the ability to react to a new need and that extra effort required to help get the job done are all part of the dcd commitment product categories hdd swivels wire mesh connectors grips dcd cable installation tools cable pulling eyes duct installation proofing manhole tools cable pulling lubricant cable pullers duct rodders line blowing overhead products this 2011 catalog combines our cable installation and overhead tools with our horizontal directional drilling catalog to give our customers a single point of reference for all their utility installation requirements overhead underground through ductwork or dirt ­ dcd design has a tool for your application dcd design has been producing cable installation tools since 1986 and we have expanded our selection in recent years to include manhole tools cable blowing projectiles and the revolutionary tube-lube 326 cable pulling lubricant our distinctive stainless steel line swivels offer the most standard features of any overhead or underground line stringing swivels and our unique power-grips have been applied internationally to off-shore wind turbine cable installations the dcd dub-swivels and maxi dub-swivels are a benchmark in the horizontal directional drilling industry we patented the harsh environment swivel in 1996 and we ve delivered thousands of quality products since then when a pullback went smoothly a dub-swivel was there connecting the drill string to the final product and most recently the overhead tools division has brought the lineman and eagle lashers to dcd design since the 1940 s the neale and cable spinning equipment company were producing aerial cable lashers for telecom and power applications dcd design continues the tradition with the proven lineman lasher and the advanced eagle lasher.

[close]

p. 3

series number 00503 00504 00508 00508 index product description dub lite® swivel dub lite® swivel specialty type dub® swivel maxi dub® swivel page 2 4 5 8 series number 32000 32900 32300 32600 32460 32650 32655 32510 32550 32700 35000 35100 35200 35300 00510 40000 51000 52000 52500 53500 54000 56000 56500 57000-57170 57500 60000 product description sheaves quadrants hangers cable rope guides meter box puller cable separators entry bells manhole brace lubricants tube-lube® 326 lubricants applicators lubricants tube-lube® 336 lubricants tube-lube® 346 lube spreader cable puller accessories page 44-45 46-47 48 48 49 50 51 52 53 54 54 55-59 61 61 62 62 63 63 64 65-67 68 68 hdd manhole tools 00000 00505 00520 00521 00522 00560 00565 00566 clevis pins detail line swivel connector can-linktm clevis connector rope to rope connector rope to swivel breakaway connector breakaway pins breakaway pin configurations 00530 min-e-maxtm breakaway connector 00550 breakaway swivel 00535 00555 breakaway pins 00652 00653 connector eye to eye/clevis 00654 00655 connector shackles 00656 connector chain link connector quick link 00660 23000 wire rope bridle sling swivels connectors 10 11 12 12 12 13 13 14-15 16 16 16 17 17 17 18 18 cable pulling lubricants tuf-lugger duct rodders accessories 00501 wire grip swivel 20 00661 00697 wire mesh grips pulling 20-23 24-27 00800 00831 wire mesh grips support multiple cable installation selection guide 28 pulling support grips fish rod 1/8 dia reel rod detectable rod 3/16 dia tuf rod 1/4 dia ruf rod detectable rod 5/16 dia ruf rod 3/8 dia ruf rod detectable rod 7/16 dia ruf rod 1/2 dia duct rodder accessories hand rodder accessories wire mesh grips duct rodders 00760 00770 00905 00925 24000 24100 24200 24300 24500 25000 mighty eye combo kit pulling eye swivel grip pulling eye lug pulling eye clevis eye multiplex pushing pulling eyes pulling eye mini grip pulling harness cable pulling eyes 29 30 32 33 34 35 36 36 58400 58410 58230-58335 58000 58100 58200 58500 61100 61700 61400 62000-63000 61000-61040 power blower hose seal offs line blowing projectiles control valve innerduct seals duct seals pull tape model q lasher eagle lasher lineman lasher overhead products lashing wire line blowing equipment 69 70 70-71 72 72 73 74 75 75 76 76-78 79 00604 00605 00615 00600 00619 00620 00621 00650 00651 08000 08100 08450 08400 08500 duct installation proofing overhead products innerduct pulling eye lug innerduct pulling eye clevis innerduct pulling eye swivel clevis duct puller vibratory plow-grip duct puller poly puller duct puller standard duct puller deluxe sealed duct puller o-ring replacement guide duct brush spiral duct brush heavy duty test slug duct checker steel duct checker polyurethane 37 37 37 38 38 39 40 41 42 42 42 43 43

[close]

p. 4

39 web site www.dcddesign.com innerduct pulling eyes 00604 00605 00615 series these products are designed to install polyethylene ducting using a screw-in tapered thread to grip the inside diameter of the duct the pulling eyes are typically used to install innerduct inside a larger duct however the 00604 and 00605 series may also be used for directional drilling applications and because there are no moving parts they are reliable and maintenance free all of these pulling eyes are designed with cutting edges to actually cut a thread in the bore of the ducting as it is being screwed in much the same way as using a tap to cut a thread in steel this helps to ensure a reliable grip installation typically requires only 7 or 8 full threads of contact to give a grip stronger than the ducting itself the pulling eyes are installed quickly and easily and require no special tooling they are manufactured out of steel and chrome plated for durability toll free 1-888-swivels 794-8357 tel 604-232-4445 fax 604-232-4446 e-mail sales@dcddesign.com lug 00604 series the lug style is recommended when attaching directly to a line swivel or other clevis type connector part no 00604-075 00604-100 00604-113 00604-125 00604-150 00604-175 nominal duct size 3/4 1 1-1/4 1-1/4 1-1/2 1-3/4 2 min duct inside dia 0.72 0.94 1.15 1.26 1.48 1.66 1.91 max duct inside dia 0.93 1.15 1.34 1.44 1.66 1.81 2.08 a 1-1/8 1-3/8 1-1/2 1-3/4 2 2-1/4 2-1/2 b 11/32 11/32 11/32 11/32 1/2 1/2 1/2 c 17/32 21/32 21/32 21/32 15/16 15/16 15/16 weight 0.51 lb 0.79 lb 1.16 lb 1.40 lb 2.03 lb 2.48 lb 3.20 lb duct installation proofing 00604-200 00604-010 driving tool for lug type pullers with 1/2 square drive telecom clevis 00605 series the clevis style pulling eyes are better if attaching to a pulling rope or wire with an eye that can be slotted into the clevis and simply attached with the pin provided part no 00605-100 00605-125 00605-150 00605-200 nominal duct size 1 1-1/4 1-1/2 2 min duct inside dia 0.94 1.26 1.48 1.91 max duct inside dia 1.15 1.44 1.66 2.08 a 1-3/8 1-3/4 2 2-1/2 b 17/32 17/32 11/16 11/16 c 13/32 13/32 5/8 5/8 weight 0.90 lb 1.48 lb 2.20 lb 3.35 lb swivel clevis 00615 series these products are similar to the 00604 and 00605 series but incorporate a built-in swivel head they should only be used to install innerduct and are not suitable for use in any kind of directional drilling application part no 00615-100 00615-125 00615-150 00615-200 nominal duct size 1 1-1/4 1-1/2 2 min duct inside dia 0.94 1.26 1.48 1.91 max duct inside dia 1.15 1.44 1.66 2.08 a 1-1/4 1-5/8 1-3/4 2-1/4 b 17/32 17/32 11/16 11/16 c 13/32 13/32 5/8 5/8 weight 0.99 lb 1.57 lb 2.23 lb 3.51 lb

[close]

p. 5

40 00600 series this product is specifically designed for installation of pvc or pe duct by vibratory plow and is particularly suited to agricultural applications because of its quick installation and removal dcd plow-grips are comprised of a stainless steel body and a clevis head with 8 links of hardened steel chain attached and hardened stainless steel expanding jaws with teeth that grip the inside of the ducting since there are various outside and inside diameters for ducting the dcd plow grip now has a single sleeve with a different bore size at each end should your ducting not fit at one end reverse the sleeve and check the other end the two sleeve sizes will cover 80 lb and 100 lb pe duct and sched 40 up to sdr 26 pvc duct as well as csa b137.1 pe duct to assemble the plow-grip to the ducting the head is pushed against a spring which contracts the hardened steel jaws the plow-grip can then be sleeved over the ducting when the head is released the jaws expand inside the duct and bite into the duct wall as the pulling load is applied it increases the bite of the jaws when the pull is complete pushing the head down will again contract the jaws allowing the plow-grip to be removed from the ducting part no 00600-075 00600-100 00600-125 nominal pipe size 3/4 1 1-1/4 min duct inside dia 0.82 1.05 1.38 max duct inside dia 0.97 1.22 1.54 max duct outside dia 1.060 1.325 1.670 weight 1.56 lb 2.24 lb 3.28 lb typical vibratory plow action causes a very fine dust or powder to surround the puller it is recommended that the user periodically dismantle the product for thorough cleaning a wrench is the only tool required for complete dismantling watch our videos duct pullers 00619 series this dcd puller has several features that make it a different puller than the others on the market most obvious is the polyurethane nose cone ­ this material has proved to be extremely durable during field testing this puller will also cover a larger range of bore sizes compared to the 00620 series and is made of fewer moving parts so maintenance and repair is easy the puller comes standard with a duct plugger installed and complete with a rear pulling eye standard duct sleeves 00625 series can also be used with this product 1.2x safe working load 5,600 lb 8,200 lb 12,000 lb 20,000 lb 30,000 lb 42,000 lb inside duct diameter decimal min 1.813 2.188 2.688 3.313 4.250 4.875 max 2.188 2.625 3.125 4.063 5.063 6.187 millimeter min 46.0 55.6 68.3 84.1 108.0 123.8 max 55.6 66.7 79.4 103.2 128.6 157.1 weight 2.0 lb 2.60 lb 3.50 lb 8.60 lb 12.28 lb 27.48 lb duct sleeve part no 00625-200 00625-250 00625-300 00625-400 part no 00619-200 00619-250 00619-300 00619-400 00619-500 00619-600 nominal duct size 2 2-1/2 3 4 5 6 safe working load is 3 times 40 of the duct yield strength to protect from creep failure duct installation proofing the main appeal of this product is the extreme ease of attaching the product to the ducting this can easily be done in just a few seconds and no tools are required toll free 1-888-swivels 794-8357 tel 604-232-4445 fax 604-232-4446 e-mail sales@dcddesign.com web site www.dcddesign.com vibratory plow-grips

[close]

p. 6

41 web site www.dcddesign.com duct pullers 00620/00621 series these products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct this causes the pulling load to be spread around the circumference of the duct and allows a maximum load to be applied without damage to the ducting care should be taken at all times not to exceed the yield value of the ducting since this may cause permanent deformation to the duct as well as loss to the integrity of the polyethylene on thin wall ducting it is recommended that an outer duct sleeve be used to prevent the duct stretching during installation a firmer and more stable grip will also be obtained when this is done use of a duct plugger will help to prevent mud and slurry from entering past the puller into the ducting duct wall thickness is normally designated by an sdr value the lower the sdr value the heavier the wall thickness these products can be used on sdr 11 through sdr 17 ducting when ordering 10 and 12 duct pullers the inside diameter of the duct must be known in order to select the correct duct puller part number jaw sets are easily interchangeable in the 10 and 12 size pullers alternate jaw sets for different sdr values can be purchased separately 3:1 safe working load 3,750 lb 3,750 lb 6,000 lb 6,000 lb 12,000 lb 12,000 lb 25,500 lb 25,500 lb 37,000 lb 79,000 lb 79,000 lb 79,000 lb 125,000 lb 125,000 lb 125,000 lb inside duct diameter decimal min 1.281 1.469 1.875 2.250 2.750 3.500 4.500 5.438 6.438 7.938 8.375 9.063 9.563 10.063 10.938 max 1.500 1.688 2.125 2.500 3.063 4.063 5.000 6.125 7.875 8.625 9.063 9.750 10.250 10.750 11.563 millimeter min 32.5 37.3 47.6 57.2 69.9 88.9 114.3 138.1 163.5 201.6 212.7 230.2 242.9 255.6 277.8 max 38.1 42.9 54.0 63.5 77.8 103.2 127.0 155.6 200.0 219.1 230.2 247.7 260.4 273.1 293.7 weight 1.5 lb 1.5 lb 3.0 lb 5.0 lb 8.5 lb 15 lb 32 lb 48 lb 82 lb 135 lb 135 lb 135 lb 190 lb 190 lb 190 lb duct sleeve part no 00625-125 00625-150 00625-200 00625-250 00625-300 00625-400 duct plugger part no 00630-125 00630-150 00630-200 00630-250 00630-300 00630-400 00630-500 00630-600 00630-800 jaw set part no 00622-1009 00622-1011 00622-1017 00622-1209 00622-1211 00622-1217 toll free 1-888-swivels 794-8357 tel 604-232-4445 fax 604-232-4446 e-mail sales@dcddesign.com part no 00620-125 00620-150 00620-200 00620-250 00620-300 00620-400 00620-500 00620-600 00620-800 00620-1009 00620-1011 00620-1017 00620-1209 00620-1211 00620-1217 nominal duct size 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10 sdr 9 10 sdr 11 10 sdr 17 12 sdr 9 12 sdr 11 12 sdr 17 duct installation proofing a 00620-1000 00620-1200 puller may be ordered separately without jaws metric these duct pullers are the same as the 00620 series but are designed with jaws that allow sizing to metric duct sizes duct puller part no 00621-040 00621-063 00621-075 00621-090 00621-110 00621-125 00621-140 00621-160 00621-180 00621-200 nominal duct size 40 mm 63 mm 75 mm 90 mm 110 mm 125 mm 140 mm 160 mm 180 mm 200 mm 225 mm 3:1 safe working load 3,750 lb 6,000 lb 6,000 lb 12,000 lb 12,000 lb 25,500 lb 25,500 lb 25,500 lb 25,500 lb 37,000 lb inside duct diameter millimeter min 32.0 50.8 60.3 73.0 85.7 98.8 114.0 125.4 144.5 163.5 max 38.0 57.1 66.7 81.0 100.0 111.5 127.0 142.9 162.0 200.0 decimal min 1.260 2.000 2.374 2.874 3.374 3.890 4.488 4.937 5.689 6.437 max 1.496 2.248 2.626 3.189 3.937 4.388 5.000 5.626 6.378 7.874 weight 1.55 lb 1.5 lb 3.0 lb 5.0 lb 8.5 lb 15 lb 32 lb 48 lb 49 lb 135 lb duct sleeve part no 00626-040 00626-063 00626-075 00626-090 00626-110 duct plugger part no 00631-040 00631-063 00631-075 00631-090 00631-110 00631-125 00631-140 00631-160 00631-180 00631-200

[close]

p. 7

42 00650/00651 series these products are designed to install polyethylene ducting using expanding jaws to grip the inside diameter of the duct while the outside diameter is prevented from stretching by a permanent outer sleeve on the puller the outer sleeve also provides a complete seal around the ducting preventing any fluids or contaminants from entering either the duct or the pulling eye the pulling head is manufactured from alloy steel and is designed to protect the mechanism from heavy knocks or side loads it is also fully sealed to prevent any fluid entry care should be taken at all times not to exceed the yield value of the ducting since this may cause permanent deformation to the duct as well as loss to the integrity of the polyethylene these duct pullers are installed quickly and easily and require no special tooling a new tooth profile makes removal much easier than the earlier models duct wall thickness is normally designated by an sdr value the lower the sdr value the heavier the wall thickness these products can be used on sdr 9 through sdr 17 ducting and schedule 40 pipe web site www.dcddesign.com outside duct diameter decimal max 1.656 1.906 2.375 2.875 3.500 4.500 5.563 6.625 millimeter max 42.1 48.4 60.3 73.0 88.9 114.3 141.3 168.3 weight 1.9 lb 2.2 lb 3.9 lb 7.33 lb 17.3 lb 26.5 lb 48.0 lb 5.6 lb max 38.1 42.9 55.6 65.1 77.8 108.0 130.2 154.0 outside duct diameter decimal max 1.575 1.969 2.480 2.953 3.543 4.331 4.921 5.512 6.299 millimeter max 40.0 50.0 63.0 75.0 90.0 110.0 125.0 140.0 160.0 weight 2.1 lb 2.3 lb 4.0 lb 6.0 lb 8.7 lb 17.3 lb 21.2 lb 26.5 lb 57.5 lb max 38.1 44.1 57.1 66.7 81.0 100.0 111.5 127.0 142.9 duct pullers inside duct diameter part no 00650-125 00650-150 00650-200 00650-250 00650-300 00650-400 00650-500 00650-600 nominal duct size 1-1/4 1-1/2 2 2-1/2 3 4 5 6 3:1 safe working load 3,100 lb 3,600 lb 5,600 lb 8,200 lb 12,200 lb 20,100 lb 30,700 lb 43,600 lb decimal min 1.250 1.438 1.813 2.188 2.688 3.438 4.313 5.063 max 1.500 1.688 2.188 2.563 3.063 4.250 5.125 6.063 millimeter min 31.8 36.5 46.0 55.6 68.3 87.3 109.5 128.6 metric these duct pullers are the same as the 00650 series but are designed with jaws that allow sizing to metric duct sizes inside duct diameter metric part no 00651-040 00651-050 00651-063 00651-075 00651-090 00651-110 00651-125 00651-140 00651-160 nominal duct size 40 mm 50 mm 63 mm 75 mm 90 mm 110 mm 125 mm 140 mm 160 mm 3:1 safe working load 3,100 lb 3,600 lb 5,600 lb 8,200 lb 12,200 lb 20,100 lb 24,700 lb 30,700 lb 43,600 lb decimal min 1.280 1.437 2.000 2.374 2.874 3.374 3.890 4.488 4.937 max 1.500 1.736 2.248 2.626 3.189 3.937 4.390 5.000 5.626 millimeter min 32.5 36.5 50.8 60.3 73.0 85.7 98.8 114.0 125.4 watch our videos duct installation proofing toll free 1-888-swivels 794-8357 tel 604-232-4445 fax 604-232-4446 e-mail sales@dcddesign.com

[close]

p. 8

43 web site www.dcddesign.com imperial size range duct pullers duct puller 00619-200 00619 series 00619-250 00619-300 00619-400 00619-500 00619-600 o-ring 90027-138 90027-175 90027-213 90027-287 90027-3751 90027-425 qty 2 2 2 2 2 3 position jaw jaw jaw jaw jaw jaw metric size range duct pullers duct puller 00621-063 00621-075 00621-090 00621 series 00621-110 00621-125 00621-140 00621-160 00621-180 00621-200 o-ring 90027-175 90027-213 90027-250 90027-250 90027-300 90027-400 90027-413 90027-475 90027-5001 qty 2 2 2 3 3 4 4 4 3 position jaw jaw jaw jaw jaw jaw jaw jaw jaw duct puller replacement o-rings imperial size range duct pullers duct puller 00620-125 00620-150 00620-200 00620-250 00620-300 00620-400 00620 series 00620-500 00620-600 00620-800 00620-1009 00620-1011 00620-1017 00620-1209 00620-1211 00620-1217 o-ring 90027-100 90027-100 90027-175 90027-213 90027-250 90027-250 90027-400 90027-475 90027-5001 90027-6001 90027-6001 90027-6001 90027-7381 90027-7381 90027-7381 qty 2 2 2 2 2 3 4 4 3 3 3 3 5 5 5 position jaw jaw jaw jaw jaw jaw jaw jaw jaw jaw jaw jaw jaw jaw jaw toll free 1-888-swivels 794-8357 tel 604-232-4445 fax 604-232-4446 e-mail sales@dcddesign.com imperial size range duct pullers duct puller o-ring 90027-087 00650-125 90027-187 90027-118 90027-118 00650-150 90027-206 90027-118 90027-138 00650-200 90027-262 90027-137 90027-175 qty 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 3 1 2 position jaw body shaft jaw body shaft jaw body shaft jaw body shaft metric size range duct pullers duct puller o-ring 90027-087 00651-040 90027-1751 90027-118 90027-118 00651-050 90027-2131 90027-118 90027-138 00651-063 90027-275 90027-137 90027-175 00651-075 90027-3251 90027-137 qty 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 3 1 2 position jaw body shaft jaw body shaft jaw body shaft jaw body shaft jaw body shaft jaw body shaft jaw body shaft jaw body shaft jaw body shaft duct installation proofing 00650 series 00650-250 90027-312 90027-137 90027-213 00651 series jaw body shaft jaw body shaft jaw body shaft jaw body shaft 90027-213 00651-090 90027-387 90027-137 90027-287 00651-110 90027-462 90027-200 90027-325 00651-125 90027-525 90027-200 90027-3751 00651-140 90027-575 90027-200 90027-425 00651-160 90027-675 90027-2501 00650-300 90027-375 90027-137 90027-287 00650-400 90027-475 90027-200 90027-3751 00650-500 90027-587 90027-200 90027-425 00650-600 90027-700 90027-2501

[close]

p. 9

44 08000 series flat steel bristles spiralled onto heavy duty wire spindle with a pulling eye on one end only this product will quickly remove grit or light dirt within the duct before installing your cable part no 08000-125 08000-150 08000-200 08000-250 08000-300 08000-350 08000-400 08000-500 08000-600 nominal duct size 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 actual outside dia 1-1/4 1-1/2 1-7/8 2-1/4 2-3/4 3-1/4 3-5/8 4-3/8 5-1/4 weight 0.39 lb 0.41 lb 0.39 lb 0.67 lb 0.71 lb 0.75 lb 0.79 lb 0.85 lb 0.92 lb heavy duty duct brush 08100 series these heavy duty wire brushes are fitted with a pulling eye on each end so the brush could be pulled back and forth for those extra tough cleaning jobs part no 08100-125 08100-150 08100-200 08100-250 08100-300 08100-350 08100-400 08100-500 08100-600 nominal duct size 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 actual outside dia 1-1/4 1-1/2 1-7/8 2-1/4 2-3/4 3-1/4 3-5/8 4-3/8 5-1/4 weight 0.69 lb 0.74 lb 0.77 lb 1.21 lb 1.25 lb 1.39 lb 1.37 lb 1.55 lb 1.82 lb test slug 08450 series these test slugs are simple aluminum mandrels designed to be pulled through the duct to test for out of roundness the slug diameters will fill approximately 70 of schedule 40 ducting and 80 of schedule 80 ducting the ends are rounded for convenient pulling in either direction nominal duct size 1-1/2 2 2-1/2 3 3-1/2 4 5 6 body dia 1.33 1.73 2.06 2.60 2.96 3.42 4.30 5.15 body length 1.68 2.37 2.94 3.50 4.06 4.81 5.94 7.06 3:1 safe working load 2,300 lb 2,300 lb 2,300 lb 2,300 lb 4,800 lb 4,800 lb 4,800 lb 4,800 lb part no 08450-150 08450-200 08450-250 08450-300 08450-350 08450-400 08450-500 08450-600 weight 0.4 lb 0.7 lb 1.1 lb 1.6 lb 2.7 lb 4.1 lb 7.1 lb 11.5 lb duct installation proofing toll free 1-888-swivels 794-8357 tel 604-232-4445 fax 604-232-4446 e-mail sales@dcddesign.com web site www.dcddesign.com spiral duct brush

[close]

p. 10

45 web site www.dcddesign.com steel duct checkertm 08400 series steel duct checkers are designed to ensure the duct bore is clear before installing the cable or other utility following initial installation of the ducting it is often a requirement that certain sized mandrels be pulled through the ducting to ensure that there has been no collapse or obstruction in the duct the steel discs are tumbled to ensure no burrs and spacers ensure easy bending around corners the wire rope running through the mandrel is high quality galvanized wire check the inside diameter of the ducting before selecting the product from the chart below toll free 1-888-swivels 794-8357 tel 604-232-4445 fax 604-232-4446 e-mail sales@dcddesign.com part no 08400-200 08400-300 08400-400 08400-500 08400-600 nominal duct size 2 3 4 5 6 max disc dia 1.69 2.65 3.57 4.56 5.51 3:1 safe working load 4,800 lb 4,800 lb 4,800 lb 4,800 lb 4,800 lb weight 3.53 lb 5.56 lb 10.2 lb 17.2 lb 25.9 lb poly duct checkertm 08500 series duct checkers are designed to ensure the duct bore is clear before installing the cable or other utility duct installation proofing following initial installation of the ducting it is often found that debris or partial collapse of the duct will impede installation of the cable the discs are manufactured from high density polyurethane giving them the toughness to clear the duct without scraping or scratching the bore walls the discs are spaced with gaps to allow passage through tight bends the wire rope running through the mandrel is high quality galvanized wire check the inside diameter of the ducting before selecting the product from the chart below part no 08500-125 08500-150 08500-200 08500-250 08500-300 08500-350 08500-400 08500-500 08500-680 08500-640 08500-880 08500-840 nominal duct size 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 sched 80 6 sched 40 8 sched 80 8 sched 40 max disc dia 1.19 1.44 1.88 2.19 2.81 3.25 3.75 4.69 5.50 5.81 6.86 7.40 3:1 safe working load 1,400 lb 1,400 lb 2,300 lb 2,300 lb 2,300 lb 4,800 lb 4,800 lb 4,800 lb 4,800 lb 4,800 lb 4,800 lb 4,800 lb weight 0.42 lb 0.50 lb 0.90 lb 1.04 lb 1.46 lb 2.57 lb 3.45 lb 4.71 lb 6.24 lb 7.16 lb 9.30 lb 11.0 lb

[close]

p. 11

terms conditions general terms shipping terms · · · shipments to the usa shipments within canada · · · all pricing is fob blaine washington there are no duties or taxes to be added to the prices shown standard dcd shipping policy is that freight will be prepaid and added to the invoice unless otherwise stated on the customer order contact dcd for free freight policy all pricing is fob richmond bc taxes will be added as per your jurisdiction freight will be prepaid and added to the invoice unless otherwise stated on the customer order all pricing is fob richmond bc applicable duties and/or taxes may be added to the prices shown freight will be prepaid and added to the invoice unless otherwise stated on the customer order a handling fee of $25.00 may be added to all orders under $100 net value loss or damage in transit are the responsibilty of the carrier any claim should be filed with the delivering transport company prices are subject to change without notice all orders subject to acceptance at the factory we reserve the right to invoice prices in effect at time of shipment product returns will only be authorized within 6 months of invoiced date all returned product must have a returned material authorization rma number assigned by the factory for all returns contact the office for shipping instructions all product returns must have freight prepaid no collect shipments will be accepted all returned product is subject to a minimum 25 re-stocking charge only product in as new condition will be accepted if product is damaged or not in original packaging a higher re-stocking charge may be assessed credit will be issued for product returns against replacement or future orders only under no circumstances will dcd offer cash refunds for product being returned for service or repair after receiving the product dcd will submit a quotation for the repair work this must be authorized by the customer prior to the work being commenced shipments outside north america · minimum order · loss or damage · prices · returned goods information · · · · · ·

[close]

p. 12

limited warranty dcd design manufacturing ltd extends the following warranty to the original purchaser of these goods for use subject to the qualifications indicated dcd design manufacturing ltd warrants to the above party for use that the goods or any component thereof manufactured by dcd design will be free from defects in workmanship for a period of 1 year from the date of purchase provided such goods are installed maintained and used in accordance with dcd design manufacturing s written instructions the following is the limited warranty policy for dcd design manufacturing ltd dcd as it pertains to all products in this catalog shipped to any market place including usa europe or elsewhere unless otherwise specified on any given order 1 dcd warrants only that all products supplied by them will be free of defects in design material or workmanship and will conform to dcd s published configurations and specifications therefore 2 this limited warranty shall be effective for a period of 6 months from the final delivery of the product either by dcd or a distributor to the end user for all cable installation products and for a period of 3 months for directional drilling swivels and duct pullers 3 upon receipt of written notice from the distributor or customer within the said 6 month period of any such defect dcd shall promptly repair or replace the defective product without charge to distributor or customer or at the sole discretion of dcd may refund the price paid by the distributor for such defective product provided it is clearly shown that such defects were caused by poor design workmanship or materials it is understood that the environment in which these products are used may be extremely hazardous and damage or excessive wear to the product can be caused by any one of many known or unknown elements this warranty will not be in effect if an unreasonable amount of damage or wear or careless use of the product is found to be the cause of the defect 4 all other warranties either express or implied for this product including but not limited to any implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed if this product is not free of defects as warranted in paragraph 1 above your sole and exclusive remedy shall be repair replacement or refund as provided in paragraph 3 above in no event shall dcd or any of its authorized distributors be liable to any distributor or customer or any third party for any damages in excess of the purchase price of the product this limitation applies to damages of any kind including direct or indirect damages lost profits lost savings or other special consequential or incidental damages whether for breach of contract tort or otherwise or whether arising out of the use of or inability to use such product even if dcd or an authorized distributor has been advised of the possibility of such damages or of any claim by any other party the foregoing limitation of liability applies to dcd and all authorized distributors and is required to be and will be deemed to be included in any warranty express or implied provided by such authorized distributors important all dcd products are designed and manufactured in a manner to satisfy both the design requirements and claimed capacities at no time should any product be modified neither should any replacement parts not supplied and approved by dcd design manufacturing ltd be used on dcd products such instances as using a standard hexagon bolt in place of a specially designed clevis pin can result in damage to the product and/or to property and may result in severe injury or death to operators or persons near by in any such instances the terms of this warranty will be voided and dcd will accept no responsibility for product failure or personal injury.

[close]

p. 13

#180 6620 mcmillan way richmond bc canada v6w1j7 604.232.4445 1.888.swivels 794.8357 fax 604.232.4446 sales@dcddesign.com www.dcddesign.com

[close]