ISCAR New Products 2015 Grooving

 

Embed or link this publication

Description

ISCAR New Products 2015 Grooving

Popular Pages


p. 1

No TimeDon't for Look Alikes! Settle for Less Use ISCAR's Innovative Products ImiVtation ISCAR HIGH Q LINES Machining Intelligently

[close]

p. 2

No Time for Look Alikes! ImiVtation Flat Top TANG-GRIP IQ Tools Engineered for Easy Chip Flow Featuring Longer Tool Life! • Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving applications) • TANG-GRIP IQ - single-ended parting insert with an unbeatable clamping method ADE L B AL C I M E TS O K N C O EC r 4 P O L LIFE 2 o ER TOO TIVITY C LONG PRODU ER H G I H W E N 138

[close]

p. 3

350 LINE TGSU Flat Top Blades with Tangentially Oriented Pocket for Parting and Grooving, for TANG-GRIP Single-Ended Inserts W= 3, 4 l1 1 3 30 40 50 60 MAX. W= 1.4, 2, 5, 6, 7, 8, 9 W 1 Dmax 2 h1 30 40 50 60 MAX. B1 2 4 A 150° Designation TGSU 35-1.4-IQ TGSU 35-2-IQ TGSU 35-3-IQ-4Z TGSU 35-4-IQ-4Z TGSU 35-5-IQ TGSU 35-6-IQ TGSU 35-7-IQ TGSU 35C-8-IQ (1) TGSU 35C-9-IQ (1) TGSU 56C-7-IQ (1) TGSU 56C-8-IQ (1) TGSU 56C-9-IQ (1) B1 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 56.0 56.0 56.0 W min 1.40 1.80 2.80 3.70 4.70 5.70 6.80 7.70 8.70 6.80 7.70 8.70 W max 1.40 2.40 3.50 4.50 5.50 6.50 7.50 8.50 10.00 7.50 8.50 10.00 D max 35.0 59.5 120.0 120.0 144.0 144.0 144.0 144.0 144.0 220.0 220.0 220.0 NOP(2) 2 2 4 4 2 2 2 2 2 2 2 2 A 2.50 (3) 2.50 (4) 2.50 3.40 4.00 5.20 6.00 7.20 8.20 6.00 7.20 8.20 (2) l1 180.00 160.00 180.00 180.00 180.00 180.00 180.00 180.00 180.00 260.00 260.00 260.00 h1 33.2 33.2 33.2 33.2 33.2 33.2 33.2 33.2 33.2 53.6 53.6 53.6 (3) Coolant N N N N N N N Y Y Y Y Y Insert TAG 1.4 TAG 2 TAG 3 TAG 4 TAG 5 TAG 6 TAG 7 TAG 8 TAG 9 TAG 7 TAG 8 TAG 9 (1) C- Internal coolant, use with TGTBU HD blocks only. Cooling tube SGCU 341 should be ordered separately. area is 1.05 mm (4) Thickness at the D.O.C. area is 1.65 mm Number of pockets Thickness at the D.O.C. 2+2 Free= 1 TGSU 35-3-IQ-4 TGSU 35-4-IQ-4 3 2 4 Spare Parts Designation TGSU 35-1.4-IQ TGSU 35-2-IQ TGSU 35-3-IQ-4Z TGSU 35-4-IQ-4Z TGSU 35-5-IQ TGSU 35-6-IQ TGSU 35-7-IQ TGSU 35C-8-IQ TGSU 35C-9-IQ TGSU 56C-7-IQ TGSU 56C-8-IQ TGSU 56C-9-IQ Extractor ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG 1.4/1.6* 2* 3-4-SH* 3-4-SH* 5-7* 5-7* 5-7* 8-12* 8-12* 5-7* 8-12* 8-12* Cooling Tube SGCU SGCU SGCU SGCU SGCU 341* 341* 341* 341* 341* * Optional, should be ordered separately ISCAR HIGH Q LINES Machining Intelligently 139

[close]

p. 4

350 LINE TGTBU Blocks for TGSU Parting and Grooving Blades H2 h h4 L3 B1 L b A1 Choose blade by B1 dimension Designation TGTBU 20-35 TGTBU 25-35 TGTBU 32-35 TGTBU 32-35 HD TGTBU 40-35 TGTBU 40-35 HD TGTBU 40-56 HD (1) h 20.0 25.0 32.0 32.0 40.0 40.0 40.0 b 19.0 23.0 29.0 30.0 41.0 41.0 41.0 B1 35.0 35.0 35.0 35.0 35.0 35.0 56.0 L3 6.00 6.00 6.00 8.00 6.00 8.00 8.00 A1 38.00 42.00 48.00 55.00 60.00 66.00 66.00 H2 56.0 56.0 56.0 64.0 56.0 64.0 72.0 h4 23.7 18.7 11.7 18.0 3.7 10.0 28.0 L 110.00 110.00 110.00 130.00 110.00 130.00 130.00 (1) (1) (1) HD - Recommended blocks for TGSU...-8, TGSU...-9 blade. Spare Parts Designation TGTBU 20-35 TGTBU 25-35 TGTBU 32-35 TGTBU 32-35 HD TGTBU 40-35 TGTBU 40-35 HD TGTBU 40-56 HD Top Clamp Screw BKU 110 BKU 110 BKU 110 BK 509 BKU 110 BK 509 BK 509 SR SR SR SR SR SR SR M6X30DIN912 M6X30DIN912 M6X30DIN912 M8X30DIN912 M6X30DIN912 M8X30DIN912 M8X30DIN912 12.9 12.9 12.9 12.9 12.9 12.9 12.9 Key HW HW HW HW HW HW HW 5.0 5.0 5.0 6.0 5.0 6.0 6.0 2+2 Free= 140

[close]

p. 5

350 LINE TGTR/L-IQ-2Z Integral Shank, TANG-GRIP Parting and Grooving Toolholders with 2 Pockets Dmax h l1 W A L2 Designation TGTR/L 2020-3-IQ-2Z TGTR/L 2525-3-IQ-2Z TGTR/L 2020-4-IQ-2Z TGTR/L 2525-4-IQ-2Z W min 2.80 2.80 3.70 3.70 b Left-hand shown W max 3.50 3.50 4.50 4.50 D max 54.0 56.0 57.0 65.0 h 20.0 25.0 20.0 25.0 b 20.0 25.0 20.0 25.0 A 2.50 2.50 3.40 3.40 l1 150.00 150.00 150.00 150.00 L2 98.90 98.00 95.00 88.00 Insert TAG TAG TAG TAG 3 3 4 4 Spare Parts Designation TGTR/L-IQ-2Z Extractor ETG 3-4-SH* * Optional, should be ordered separately ee= r F 1 1+ 2 2 1 VED IMPRO ATURING RY FE LIFE T E M O L GE R TOO E G N O L TGTR/L-2T..SH-L120 Integral Shank, Short-Head TANG-GRIP Parting and Grooving Toolholder Dmax l1 h h4 b l2 A W min 1.80 1.80 1.80 Dmax h1 W Tmax-r b 10.0 12.0 16.0 TGTR/L 10 10.8 A 1.65 1.65 1.65 Right-hand shown Designation TGTR/L 1010-2T10SH-L120-IQ TGTR/L 1212-2T15SH-L120-IQ TGTR/L 1616-2T18SH-L120-IQ (1) W max 2.50 2.50 2.50 h 10.0 12.0 16.0 h1 10.1 12.1 16.1 l1 120.00 120.00 120.00 l2 15.0 15.0 - h4 5.0 3.0 - Tmax-r 10.00 15.00 18.00 D max(1) 26.0 30.0 36.0 For parting Spare Parts Designation TGTR/L-2T..SH-L120 Extractor ETG 2-SH-T* * Optional, should be ordered separately ISCAR HIGH Q LINES Machining Intelligently 141

[close]

p. 6

350 LINE TGTR/L-IQ Integral Shank, TANG-GRIP Parting and Grooving Toolholder Dmax l2 h W L3 A Designation TGTR/L 1010-1.4-IQ TGTR/L 1212-1.4-IQ TGTR/L 1616-1.4-IQ TGTR/L 2020-1.4-IQ TGTR/L 1010-1.6-IQ TGTR/L 1212-1.6-IQ TGTR/L 1616-1.6-IQ TGTR/L 1010-2-IQ TGTR/L 1212-2-IQ TGTR/L 1612-2-L120-IQ TGTR/L 1616-2-IQ TGTR/L 2012-2-IQ TGTR/L 1212-3-IQ TGTR/L 1612-3-L120-IQ TGTR/L 1616-3-IQ TGTR/L 2012-3-IQ TGTR/L 2020-3-IQ TGTR/L 2525-3-IQ TGTR 2525K-3 (1) TGTR/L 2020-4-IQ TGTR/L 2525-4-IQ TGTR/L 2020-5-IQ TGTR/L 2525-5-IQ TGTR/L 2525-6-IQ (1) l1 h h4 b Left-hand shown H2 W min 1.40 1.40 1.40 1.40 1.60 1.60 1.60 1.80 1.80 1.80 1.80 1.80 2.80 2.80 2.80 2.80 2.80 2.80 2.80 3.70 3.70 4.70 4.70 5.70 W max 1.45 1.45 1.45 1.45 1.64 1.64 1.64 2.40 2.40 2.50 2.40 2.40 3.50 3.50 3.50 3.50 3.50 3.50 3.50 4.50 4.50 5.50 5.50 6.50 h 10.0 12.0 16.0 20.0 10.0 12.0 16.0 10.0 12.0 16.0 16.0 20.0 12.0 16.0 16.0 20.0 20.0 25.0 25.0 20.0 25.0 20.0 25.0 25.0 b 10.0 12.0 16.0 20.0 10.0 12.0 16.0 10.0 12.0 12.0 16.0 12.0 12.0 12.0 16.0 12.0 20.0 25.0 25.0 20.0 25.0 20.0 25.0 25.0 A 1.05 1.05 1.05 1.05 1.30 1.30 1.30 1.65 1.65 1.65 1.65 1.65 2.50 2.50 2.50 2.50 2.50 2.50 2.50 3.40 3.40 4.00 4.00 5.20 l1 140.00 140.00 140.00 140.00 120.00 120.00 120.00 150.00 150.00 120.00 150.00 125.00 150.00 120.00 150.00 125.00 120.50 150.50 150.00 120.50 150.50 120.00 150.00 150.00 H2 15.0 12.0 16.0 20.0 15.0 15.0 16.0 16.0 20.0 19.0 19.0 19.0 20.0 21.7 26.7 26.7 21.7 26.7 21.7 25.0 25.0 l2 23.4 23.4 23.4 23.4 23.4 - L3 15.50 16.00 16.00 16.00 16.00 16.00 16.00 15.50 17.00 16.00 16.00 16.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 19.00 h4 5.0 3.0 5.0 3.0 5.0 3.0 7.0 3.0 3.0 - D max Insert Extractor 20.0 30.0 30.0 30.0 28.0 32.0 35.0 28.0 32.0 35.0 35.0 35.0 32.0 35.0 35.0 43.0 54.0 56.0 56.0 57.0 65.0 57.0 76.0 76.0 TAG 1.4 TAG 1.4 TAG 1.4 TAG 1.4 TAG 1.6 TAG 1.6 TAG 1.6 TAG 2 TAG 2 TAG 2 TAG 2 TAG 2 TAG 3 TAG 3 TAG 3 TAG 3 TAG 3 TAG 3 TAG 3 TAG 4 TAG 4 TAG 5 TAG 5 TAG 6 ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG ETG 1.4/1.6* 1.4/1.6* 1.4/1.6* 1.4/1.6* 1.4/1.6* 1.4/1.6* 1.4/1.6* 2* 2* 2* 2* 2* 3-4-SH* 3-4-SH* 3-4-SH* 3-4-SH* 3-4* 3-4* 3-4* 3-4* 3-4* 5-7* 5-7* 5-7* With coolant * Optional, should be ordered separately 142

[close]

p. 7

350 LINE TGTR/L-D Integral Shank TANG-GRIP Parting and Grooving Toolholders with Reinforced Blades, Mainly for Sub-Spindle Machines TGTR/L 20...D65 h h4 l2 b Designation TGTR/L 1616-2-D52-IQ TGTR/L 2020-2-D65-IQ TGTR/L 1616-3-D52-IQ TGTR/L 2020-3-D65-IQ W 2.00 2.00 3.00 3.00 l1 Dmax h L3 TGTR/L 16...D52 Dmax D1max A1 L3 A h 16.0 20.0 16.0 20.0 W f l1 125.00 125.00 125.00 125.00 A Right-hand shown W min W max 1.80 1.80 2.80 2.80 2.40 2.40 3.50 3.50 b 16.0 20.0 16.0 20.0 A 1.65 1.65 2.50 2.50 A1 3.50 3.50 - l2 40.0 40.0 40.0 40.0 f 15.2 19.2 14.8 18.8 h4 14.0 10.0 14.0 10.0 D max D1 max 52.0 65.0 52.0 65.0 65.0 65.0 - L3 6.00 18.00 6.00 18.00 Insert TAG TAG TAG TAG 2 2 3 3 Depth Capacity DGTR/L-D Table Determining Depth of Cut as Function of Workpiece Diameter T D Designation TGTR/L 1616-2-D52-IQ TGTR/L 2020-2-D65-IQ TGTR/L 1616-3-D52-IQ TGTR/L 2020-3-D65-IQ D Tmax 20 20 20 20 40 25 25 25 25 50 19 30 20 30 60 16 31 17 31 70 15 29 15 29 80 13 26 13 26 100 11 24 11 24 120 10 23 10 23 150 9 22 9 22 200 8 20 8 20 300 Spare Parts Designation TGTR/L 1616-2-D52-IQ TGTR/L 2020-2-D65-IQ TGTR/L 1616-3-D52-IQ TGTR/L 2020-3-D65-IQ Extractor ETG ETG ETG ETG 2* 2* 3-4-SH* 3-4-SH* * Optional, should be ordered separately ISCAR HIGH Q LINES Machining Intelligently 143

[close]

p. 8

TAG N-C/W/M Parting Grooving and Slitting Single-Ended Inserts for Parting Bars, Hard Materials and Tough Applications W W R C W R 7º Dimensions Tough Ö Hard Recommended Machining Data IC5400 IC30N IC830 IC928 IC808 IC908 IC807 Designation TAG N1.4C TAG N1.6C TAG N2C TAG N2.4C TAG N3CB (1) TAG N3C TAG N3M (2) TAG N3W TAG N4C TAG N4CB (1) TAG N4M (2) TAG N4W TAG N4.8C TAG N5C TAG N6.3C TAG N7W TAG N8C TAG N9.5C TAG N9.5W TAG N12.7W (1) W 1.40 1.60 2.00 2.40 3.00 3.05 3.05 3.05 4.00 4.00 4.00 4.00 4.80 5.05 6.30 7.00 8.00 9.50 9.50 12.70 W±toler 0.05 0.05 0.05 0.04 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.10 0.10 0.10 (2) R±0.04 0.16 0.16 0.20 0.16 0.35 0.20 0.20 0.20 0.24 0.40 0.24 0.24 0.30 0.25 0.35 0.50 0.50 0.50 0.50 0.85 IC20 (mm/rev) 0.04-0.10 0.04-0.14 0.05-0.16 0.06-0.18 0.12-0.30 0.10-0.25 0.06-0.18 0.10-0.25 0.10-0.30 0.10-0.33 0.06-0.20 0.10-0.30 0.10-0.35 0.10-0.35 0.15-0.40 0.18-0.40 0.20-0.70 0.25-0.80 0.22-0.80 0.30-0.80 f groove l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l • Feed values for grade IC20 should be decreased by 50%. Larger corner radii for interrupted cut and high feed applications. Similar to C-type, but with a modified edge. Improved chip control at medium feeds. 144

[close]

p. 9

TAG R/L-C Parting Single-Ended Insert for Bars, Hard Materials and Tough Parting Applications W faº faº W R R 7º L R Recommended Machining Data Dimensions Tough Ö Hard IC30N IC830 IC928 IC808 IC908 Designation TAG R/L2C-6D TAG R2.4C-8D TAG R/L3C-6D TAG R3C-8D TAG R/L3C-15D TAG R/L4C-4D TAG R/L5C-4D TAG R/L6.3C-4D W±0.10 2.05 2.40 3.00 3.00 3.00 4.05 5.05 6.35 R±0.05 0.20 0.16 0.20 0.20 0.20 0.24 0.25 0.35 fa° 6.0 8.0 6.0 8.0 15.0 4.0 4.0 4.0 (mm/rev) 0.04-0.12 0.05-0.13 0.08-0.18 0.06-0.16 0.08-0.16 0.08-0.20 0.10-0.25 0.12-0.30 f groove l l l l l l l l l l l l l l l l l l l l 2+2 Free= ISCAR HIGH Q LINES Machining Intelligently 145

[close]

p. 10

TAG N-MF Parting Grooving and Slitting Single-Ended Inserts for Stainless and Alloy Steel at Medium Feed Applications W R 7° Dimensions Tough Ö Hard Recommended Machining Data IC5400 IC830 IC808 Designation TAG N2MF TAG N3MF TAG N4MF TAG N5MF W 2.00 3.00 4.00 5.00 W±toler 0.05 0.05 0.05 0.05 R±0.03 0.20 0.20 0.25 0.25 (mm/rev) 0.04-0.12 0.06-0.18 0.07-0.22 0.07-0.25 f groove l l l l l l l l l l TAG N-J/JS/JT Parting Grooving and Slitting Single-Ended Inserts, for Soft Materials JT J W R 7º Dimensions Tough Ö Hard Recommended Machining Data IC5400 IC830 IC928 IC808 IC908 IC807 Designation TAG N1.4J TAG N1.6J TAG N2JS (1) TAG N2J TAG N2JT TAG N3JS (1) TAG N3J TAG N3JT TAG N3.2JT TAG N4J TAG N4JT TAG N5J TAG N5JT TAG N6.3J TAG N6.3JT TAG N7JT W±0.04 1.40 1.60 2.00 2.00 2.00 3.05 3.05 3.05 3.25 4.00 4.05 5.05 5.05 6.35 6.35 7.05 R±0.05 0.16 0.16 0.02 0.20 0.20 0.02 0.20 0.20 0.20 0.24 0.24 0.25 0.25 0.34 0.34 0.50 IC20 (mm/rev) 0.03-0.10 0.03-0.12 0.03-0.08 0.04-0.12 0.04-0.10 0.04-0.10 0.04-0.16 0.05-0.18 0.05-0.18 0.04-0.18 0.06-0.20 0.05-0.20 0.06-0.22 0.06-0.22 0.08-0.25 0.10-0.28 f groove l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l • JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge. Most suitable for soft materials at low to medium feeds. The JS-type has sharp corners. (1) Sharp corners 146

[close]

p. 11

TAG R/L-J/JS TANG-GRIP Parting Inserts for Soft Materials, Tubes, Small Diameters and Thin-Walled Parts R W fa° fa° W R 7° L R Recommended Machining Data Dimensions Tough Ö Hard IC830 IC928 IC808 IC908 IC807 Designation TAG R/L1.4J-8D TAG R/L1.4JS-10D (1) TAG R/L2J-6D TAG R/L2JS-6D (1) TAG R/L2J-15D TAG R/L2JS-15D (1) TAG R/L3J-6D TAG R/L3JS-6D (1) TAG R/L3J-15D TAG R/L3JS-15D (1) TAG R/L4J-4D TAG R/L5J-4D TAG R/L6.3J-4D (1) W 1.40 1.40 2.00 2.00 2.00 2.00 3.00 3.00 3.00 3.00 4.00 5.05 6.35 R 0.16 0.02 0.20 0.02 0.20 0.02 0.20 0.02 0.20 0.02 0.24 0.25 0.35 fa° 8.0 10.0 6.0 6.0 15.0 15.0 6.0 6.0 15.0 15.0 4.0 4.0 4.0 (mm/rev) 0.03-0.08 0.02-0.06 0.03-0.10 0.02-0.08 0.03-0.08 0.02-0.06 0.04-0.14 0.03-0.10 0.04-0.12 0.03-0.08 0.04-0.15 0.05-0.18 0.05-0.20 f groove l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l Sharp corners TAG N-LF Parting Grooving and Slitting Single-Ended Inserts, for Stainless Steel R W 7° Dimensions Tough Ö Hard Recommended Machining Data IC5400 IC830 IC808 Designation TAG N2LF TAG N3LF W±0.04 2.00 3.05 R±0.03 0.20 0.20 (mm/rev) 0.03-0.08 0.04-0.10 f groove l l l l l l ISCAR HIGH Q LINES Machining Intelligently 147

[close]

p. 12

TAG N-UT Parting Grooving and Slitting Single-Sided Inserts, for Low Feeds on Cr-Ni Alloys, Ductile Materials & Low Carbon Steel R W 7° Dimensions Tough Ö Hard Recommended Machining Data IC830 IC808 IC908 Designation TAG N2UT TAG N3UT TAG N4UT TAG N5UT TAG N6UT W±0.04 2.00 3.00 4.00 5.00 6.00 R±0.04 0.20 0.30 0.30 0.30 0.85 (mm/rev) 0.03-0.10 0.04-0.12 0.05-0.15 0.05-0.18 0.06-0.22 f groove l l l l l l l l TAG N-A Parting Grooving and Slitting Single-Ended Inserts for Machining Aluminum 10° R 7° W Dimensions Recommended Machining Data Designation TAG N2A TAG N3A TAG N4A W±0.04 2.10 3.05 4.05 R±0.05 0.20 0.20 0.24 IC20 (mm/rev) 0.02-0.10 0.03-0.14 0.03-0.16 f groove l l l 148

[close]

p. 13

ECONOMICAL BLADE 2 or 4 POCKE TS LONGER TOOL LIFE HIGHER PRODUCTIVITY NEW ISCAR HIGH Q LINES Machining Intelligently 149

[close]

p. 14

No Time for Look Alikes! ImiVtation 2 and 3 mm Wide Long Inserts for Parting up to 65 mm Diameters • 2 mm up to 60 mm diameter. • 3 mm up to 65 mm diameter. • The tools feature a relatively short head construction and screw clamp for high rigidity, providing smooth cutting, when compared to other tools available in the market. • Clamping and release of the screw is done from the bottom of the tool. • Due to their high rigidity and thin width, the new tools can save workpiece material. IDE RTS W 2 MM NG INSE LO TING M M 32 FOR PAR NEW • The tools produce excellent surface finish and straightness. • The new 2 and 3 mm C/J-XL inserts which are made from IC808, IC830 and IC5400 SUMO TEC grades were tested and compared with competitors’ similar products. They provided better tool life and improved machining results. • The 2 and 3 mm insert is available in either C- or J-type chipformers, producing optimal chip formation on a wide variety of workpiece materials. 150

[close]

p. 15

DGTR/L-XL Integral Shank Reinforced Parting and Grooving Tools for Parting Up to 65 mm Diameters l2 h Dmax. W f Designation DGTR/L 20B-2XL-D60 DGTR/L 25B-2XL-D60 DGTR/L 20B-3XL-D65 DGTR/L 25B-3XL-D65 W 2.00 2.00 3.00 3.00 l1 h h4 A b h 20.0 25.0 20.0 25.0 Left-hand shown D max 60.0 60.0 65.0 65.0 b 20.0 25.0 20.0 25.0 A 1.74 1.74 2.40 2.40 l1 150.00 150.00 150.00 150.00 l2 41.3 41.3 41.3 41.3 f 19.1 24.1 18.8 23.8 h4 8.0 3.0 12.0 7.0 Spare Parts Designation DGTR/L 20B-2XL-D60 DGTR/L 25B-2XL-D60 DGTR/L 20B-3XL-D65 DGTR/L 25B-3XL-D65 Screw SR SR SR SR Key M4X35DIN912 12.9 HW 3.0 M4X35DIN912 12.9 HW 3.0 M5X40DIN912 HW 4.0 M5X40DIN912 HW 4.0 Depth of Cut as Function of Workpiece Diameter Tmax/Dmax for DGTR/L...-2XL T max 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 D max No limit 600 300 200 150 130 120 100 90 85 80 75 70 65 63 60 Tmax/Dmax for DGTR/L...-3XL T max 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32.5 D max No limit 1000 400 300 230 180 150 130 115 105 95 90 85 80 75 72 70 65 Tmax Dmax ISCAR HIGH Q LINES Machining Intelligently 151

[close]

Comments

no comments yet