p. 1

rotary unions catalog dated january 2010 supersedes all previous catalogs 800 421-7051 · 614 864-1811 www.midsta tehose .c om performance under pressure

[close]

p. 2

terms and conditions payment terms credit freight net 30 days from invoice date please pay from invoice statement will be sent only upon request orders will be shipped on an open account basis after credit approval all items are f.o.b shipping point unless otherwise noted freight prepaid on shipments of $3000 to $5000 depending upon location defective items may be returned with prior approval within 14 days of original shipment all returns must be accompanied by our written authorization hose assemblies and tube assemblies are made to special order and may not be returned unless defective cancellations will be accepted subject to charges for costs incurred to date of cancellation for a period of one year after date of purchase mid-state warrants it s products to be free from defects in materials and workmanship when properly installed and maintained defective products will be replaced or credit given liability is limited to the invoice value of the merchandise returned in no event shall mid-state be liable for any special incidental or consequential damages whatsoever this is our entire warranty no other warranty either implied or expressed is given returns cancellations warranty:

[close]

p. 3

614 864-1811 columbus customer service a rotary union or rotating union is used to conduct fluids and gases from one point to another often under high pressure additionally a rotating union is designed to lock onto an input valve while rotating or swiveling to meet an outlet many rotary unions incorporate multiple ports some of which are designed to handle different types of material simultaneously rotary unions create a dynamic seal between a stationary cylinder and a rotating piston or a shaft located inside the cylinder rotary unions appear in machines that require constant supplies of lubrication air or other liquids in order for moving parts to run smoothly rotary unions are also heavily used in crude oil processing the chemical industry commercial food production paper and pulp and pharmaceutical applications contact our customer service group for technical rotary union information regarding your application type c and cs rotary joints available in eight sizes are ideal for a wide range of applications using steam water oil for hot oil/therminol applications see the hot oil page for details or gas over a wide temperature range up to 406°f 208°c these joints feature an iron casing bronze or ferrous sleeve and end cap stainless steel spring and spring guides type c the high density carbon seal under compression and wide spread bearing surfaces assure exceptionally long service life without lubrication a key maintenance feature is the external seal wear indicator type cs is for single flow applications only www.midstatehose.com 3

[close]

p. 4

800 421-7051 customer service hotline type cs bronze trim construction bronze sleeve and end cap with iron casting for water brine and low pressure steam are available ferrous trim construction recommended for higher pressure steam to 250 psi 17.5 kg/cm2 and hot oil service preventive maintenance by measuring dimension x from step on sleeve to end of cap and referring to the dimension table visual inspection periodically can determine when seals should be replaced important for cooling applications on rubber calender and mill service the supply line should be installed in the smaller rotary joint port with the return or discharge line installed in the larger port this is necessary to maintain proper temperature conditions working pressure joint size 1 type c basic ass y number bc54000 bc54065 bc54000 bc54065 bc54000 bc54065 bc54000 bc54065 bc54000 bc54065 bc54000 bc54065 bc54000 bc54065 bc54000 bc54065 e 3.00 3.38 3.62 4.38 4.75 6.00 6.75 7.88 g 5.37 5.19 5.96 7.01 7.50 8.65 10.15 10.88 type cs basic ass y number bc54100 bc54165 bc54100 bc54165 bc54100 bc54165 bc54100 bc54165 bc54100 bc54165 bc54100 bc54165 bc54100 bc54165 bc54100 bc54165 h 1.62 1.75 2.06 2.19 2.44 2.75 3.00 3.62 j 1.73 1.73 2.08 1.96 2.20 2.29 2.99 3.14 joint trim ferrous bronze ferrous bronze ferrous bronze ferrous bronze ferrous bronze ferrous bronze ferrous bronze ferrous bronze k 4.56 4.56 5.21 6.70 7.06 8.09 9.76 10.69 cold 500 300 500 300 500 300 500 300 500 300 400 300 400 300 400 300 lc 5.87 6.19 7.03 8.62 9.06 10.65 12.45 13.06 n 1.16 1.25 1.25 1.78 2.06 2.56 2.50 2.88 saturated steam 250 125 250 125 250 125 250 125 250 125 225 125 225 125 225 125 p 2.41 2.41 4.04 4.40 4.75 5.03 6.33 6.62 a&b 1 c 1 pipe threads d syphon d syphon thd thd integral w/bush 1 aa pipe i.d .50 .75 .69 1.00 .94 1.25 1.50 1.88 1.81 2.38 2.18 2.88 2.86 /2 /4 /2 /4 /4 /2 /2 /4 /4 /8 /4 /8 /2 /4 /4 1 /8 /4 /8 /2 /2 /4 3 3 1 1 1 1 1/4 1 1/2 2 2 1/2 3 1 1 1/4 1 1/2 2 2 1/2 3 q hole size .50 .50 .50 .62 .62 .62 .75 .94 1 3 1 3 1 3 3 3 1 1 1/4 1 1/4 1 1/2 3 1 1 1 1/2 3 1 joint size 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 torque rod od size .38 .38 .38 .50 .50 .50 .62 .75 r 4.81 4.87 5.65 6.63 7.00 8.09 9.58 10.37 s conn 1 /4 1 /4 1 /2 3 /4 3 /4 1 1/4 1 1/4 1 1/2 t 2.00 2.19 2.31 2.88 3.00 2.75 3.06 3.62 x .19 .19 .25 .25 .25 .31 .25 .25 wt lbs 3 1/2 5 6 13 15 26 33 45 for syphon use all joints equipped for use with syphon pipe are furnished with d connection for large size syphon a bushing is shipped with each joint 1 through 3 sizes for reducing the d connection for small size syphon if required installation instructions are included with each bushing syphon pipes are not included joints also available with jis and/or bsp threads on sleeve all dimensions in inches 4 www.midstatehose.com

[close]

p. 5

614 864-1811 columbus customer service hot oil rotary the barco type c cf cs and csf rotary joints are available in a special design precision fitted for hot oil/therminol applications this joint was developed for circulating oil operating at lower and less dangerous pressures than saturated steam systems available in 1 /2 through 3 sizes barco hot oil joints are recommended for applications using mobiltherm 600 dowtherm and other heat transfer fluids for circulating systems at temperatures up to +600°f 316°c the type c hot oil joint has been field-tested and proven to be the only satisfactory joint among those tested it is being successfully used on a number of machines designed by several manufacturers of paper textile and rubber goods machinery joint size 1 /2 3 /4 1 1 1/4 1 1/2 2 2 1/2 3 type c threaded sleeve with syphon conn assembly numbers left hand right hand bc54000-08-21 bc54000-08-20 bc54000-12-21 bc54000-12-20 bc54000-16-21 bc54000-16-20 bc54000-20-21 bc54000-20-20 bc54000-24-21 bc54000-24-20 bc54000-32-21 bc54000-32-20 bc54000-40-21 bc54000-40-20 bc54000-48-21 bc54000-48-20 type cs type cf threaded sleeve flanged /single flow weight sleeve assembly number in syphon conn left hand right hand lbs assembly no bc54100-08-21 bc54100-08-20 3.5 bc54100-12-21 bc54100-12-20 4.5 bc54100-16-21 bc54100-16-20 5.5 bc54000-16-30 bc54100-20-21 bc54100-20-20 12 bc54000-20-30 bc54100-24-21 bc54100-24-20 15 bc54000-24-30 bc54100-32-21 bc54100-32-20 26 bc54000-32-30 bc54100-40-21 bc54100-40-20 35 bc54000-40-30 bc54100-48-21 bc54100-48-20 44 bc54000-48-30 type csf flanged sleeve weight single flow in assembly no lbs bc54100-16-30 6.5 bc54100-20-30 13 bc54100-24-30 16.5 bc54100-32-30 29 bc54100-40-30 37 bc54100-48-30 50 for dimensions see type c and cs and type cf and csf joints are available with jis and /or bsp threads on sleeve preventive maintenance by measuring dimension x from step on sleeve to end of cap and referring to the table on the c and cs page visual inspection periodically can determine seal wear when measured dimension exceeds x dimension hot oil repair kits may be ordered from your local barco distributor many of the present oils used tend to coke at high temperatures and deposit material which settles in the joint the joint must be periodically cleaned to remove this residue in addition hot spots in the joint may generate this material barco recommends a 40-60 micron filter be installed upstream from the rotary joint to collect this residue and protect the joint note joints are available for applications exceeding +600°f contact barco for details www.midstatehose.com 5

[close]

p. 6

800 421-7051 customer service hotline steam water rotary joints for quick and easy installation or removal provides precision control of concentricity type cf and csf rotary joints are identical to type c and cs but offer flange mounting for use where this is desirable or necessary important advantages of flange mounting are that installation is simple and quick and the concentricity and alignment are accurately controlled standard cf joints are furnished with mounting flanges split ring two halves key and soft metal ring gasket sizes 1 1 1/2 2 2 1/2 3 operating temperatures as high as 406°f 208°c pressures up to 250 psi 17.5 kg/cm2 hydraulics no lubrication required working pressure joint size 1 1 1/2 2 2 1/2 3 type c basic ass y number bc54000 bc54065 bc54000 bc54065 bc54000 bc54065 bc54000 bc54065 bc54000 bc54065 type cs basic ass y number bc54100 bc54165 bc54100 bc54165 bc54100 bc54165 bc54100 bc54165 bc54100 bc54165 joint trim ferrous bronze ferrous bronze ferrous bronze ferrous bronze ferrous bronze cold 500 300 500 300 400 300 400 300 400 300 saturated steam 250 125 250 125 225 125 225 125 225 125 a&b 1 1 1/2 2 2 1/2 3 c 1 pipe threads d syphon d syphon thd thd integral w/bush 3 aa pipe i.d 1.00 .94 1.50 1.44 1.88 2.38 2.19 2.88 /2 /4 /8 /4 /4 1 /4 /2 /2 /4 3 3 1 1-1/4 1-1/4 1 1/2 3 1 1 1 1/2 3 1 6 www.midstatehose.com

[close]

p. 7

614 864-1811 columbus customer service joint size 1 1 1/2 2 2 1/2 3 e 3.62 4.75 6.00 6.75 7.88 g 5.67 6.42 7.88 9.09 9.75 10.35 h 2.06 2.44 2.75 3.00 3.62 j 1.78 2.54 2.57 2.73 2.59 2.62 k 4.92 5.67 7.44 8.53 9.35 10.16 lcf l cfs 6.73 5.97 7.48 6.72 9.44 8.94 11.09 12.06 12.53 m 3.88 4.88 5.50 5.88 6.50 n 1.25 2.06 2.56 2.50 2.88 p size 1.96 2.56 2.75 3.35 3.50 q torque hole rod od r s t size max conn 1 .50 .38 5.36 /2 2.31 6.11 3 .62 .50 7.38 3.00 /4 .62 .75 .94 .50 .62 .75 8.66 9.17 9.84 1 1/4 1 1/4 1 1/2 2.75 3.06 3.62 x .25 .25 .31 .25 .25 wt lbs 9 19 31 40 50 for siphon use all joints equipped for use with siphon pipe are furnished with d connection for large size siphon a bushing is shipped with each joint 1 through 3 sizes for reducing the d connection for small size siphon if required installation instructions are included with each bushing siphon pipes are not included journal flanges not furnished joint size 1 1 1/2 2 2 1/2 3 stud data bolt circle 2 3 4 4 5 /4 5 /8 1 /4 5 /8 1 /4 3 size 1 length 2 2 2 2 2 /2 1 /2 1 /2 1 /2 1 /2 1 reg 4 4 4 4 4 y 003 000 1.406 2.096 2.721 3.096 3.721 /2 13 5 /8 11 5 /8 11 5 /8 11 5 /8 11 when ordering journal flanges flange dimension uvwz bolt hole data b.c size no req bronze trim construction bronze sleeve and end cap with iron casting for water brine and low pressure steam are available ferrous trim construction recommended for higher pressure steam to 250 psi 17.5 kg/cm2 and hot oil service ordering journal flanges journal flanges may be ordered separately to specifications or furnished by the customer flange styles 2 or 3 with custom-machined pilot diameters are recommended for best concentricity control the customer will normally furnish studs nuts and lockwashers for mounting flange socket head bolts for the journal flange and the gasket between flange and journal if the journal flange is purchased from barco studs nuts and lockwashers for the mounting flange to journal flange assembly are furnished preventive maintenance by measuring dimension x from step on sleeve to end of cap and referring to the dimension table visual inspection periodically can determine when seals should be replaced www.midstatehose.com 7

[close]

p. 8

800 421-7051 customer service hotline cr crf the cr threaded and crf flanged rotary joints are designed to be used with rotating syphon in water or other circulating service the rotating syphon pipe is retained by a special bearing in place of a threaded stationary syphon connection which is independent of the seal when used in circulating liquid service with relatively equal pressure in both inlet and outlet passages a small amount of cross circuit leakage between the passages must be permissible syphon pipes are not furnished but must be machined to dimensions given in the table below pressure and temperature ratings are equivalent to those given for type c and cf type cr assembly number joint size 1 type crf weight in lbs 3.5 3.5 4.5 4.5 5.5 5.5 12 12 15 15 26 26 35 35 44 44 ferrous bronze ferrous bronze ferrous bronze ferrous bronze ferrous bronze ferrous bronze joint trim left hand right hand bc54205 -08-50 bc54206 -08-50 bc54205 -12-50 bc54206 -12-50 bc54205 -16-50 bc54206 -16-50 bc54205 -20-50 bc54206 -20-50 bc54205 -24-50 bc54206 -24-50 bc54205 -32-50 bc54206 -32-50 bc54205 -40-50 bc54206 -40-50 bc54205 -48-50 bc54206 -48-50 joint trim free flow area weight syphon a dia around thread flanged assembly in pipe syphon b syphon end end numbers lbs size pipe length sq in c c 1 /2 3 /4 1 1 /4 1 1 1/2 2 2 1/2 3 ferrous bc54205 -08-51 bronze bc54206 -08-51 ferrous bc54205 -12-51 bronze bc54206 -12-51 ferrous bc54205 -16-51 bronze bc54206 -16-51 ferrous bc54205 -20-51 bronze bc54206 -20-51 ferrous bc54205 -24-51 bronze bc54206 -24-51 ferrous bc54205 -32-51 bronze bc54206 -32-51 ferrous bc54205 -40-51 bronze bc54206 -40-51 ferrous bc54205 -48-51 bronze bc54206 -48-51 /8 .371 .372 .496 .497 .621 .622 .808 .810 .995 .997 1.245 1.247 1.495 1.497 1.745 1.747 1 1/8 .068 5.19 6.5 1 /4 1 1/8 .213 5.25 bc54205 -16-60 bc54206 -16-60 bc54205 -20-60 bc54206 -20-60 bc54205 -24-60 bc54206 -24-60 bc54205 -32-60 bc54206 -32-60 bc54205 -40-60 bc54206 -40-60 bc54205 -48-60 bc54206 -48-60 3 6.5 13 1 /8 1 1/4 .427 6.18 6.00 6.74 6.81 7.75 8.13 13 16.5 3 /2 1 1/2 .673 7.25 16.5 29 29 37 37 50 50 /4 1 1/2 .901 7.75 1 2 1.784 9.12 9.59 1 1/4 2 1/4 2.745 10.62 10.17 1 1/2 2 1/4 4.234 11.31 10.75 note this diameter to be machined smooth 16-32 rms joints are available with jis and /or bsp threads on sleeve 8 www.midstatehose.com

[close]

p. 9

614 864-1811 columbus customer service gr and grx rotary steam joints for rotary syphons sizes 2 2 1/2 and 3 gr special design features · antimony seals and bearings in the grx provide longer life especially on higher speed machines · sleeves are dual driven by two keys to give greater resistance to side load and eccentric motion · external seal wear indicator for preventive maintenance · all wear surfaces are treated for improved corrosion resistance · directly interchangeable with competitive designs · seal under compression design can better handle pressure surges and promotes longer life joint size 2 2 1/2 gr joint part number bc-56343-32-62 bc-56354-32-62 bc-56343-40-62 bc-56344-40-62 bc-56355-40-62 bc-56354-48-62 bc-56355-48-62 bc-56366-48-62 grx joint a thread b part number npt syphon c 3 5.75 /4 bc-56743-32-62 1 146 bc-56754-32-62 1 1/4 1 3 bc-56743-40-62 1 /4 6.44 bc-56744-40-62 1 1 163 1 1 bc-56755-40-62 1 /4 1 /4 1 bc-56754-48-62 1 /4 1 bc-56755-48-62 1 1/4 1 1/4 6.81 173 bc-56766-48-62 1 1/2 1 1/2 e thread npt 1 /2 1 d 6.88 175 7.25 184 7.51 191 f g 10.00 13.75 254 349 10.75 14.79 273 376 10.75 15.88 273 403 h .62 16 .69 17 .69 17 j 3.16 80 3.06 78 2.93 74 k .44 11 .41 10 .41 10 2 3 2 1/2 other syphon sizes available contact barco flange detail for gr grx and super g joint size 1 1/4 1 1/2 2 2 1/2 3 part number 10-64034-43 10-64035-43 10-64036-43 10-64037-43 10-64038-43 j .62 16 .69 17 .75 19 .88 22 .94 24 k .56 14 .56 14 .56 14 .56 14 .69 18 l 5.50 140 5.50 140 6.81 173 6.75 171 8.00 203 m 3.50 89 3.58 98 4.75 121 4.75 121 6.75 171 n 1.620 1.622 41.15 41.20 1.870 1.872 47.50 47.55 2.318 2.320 58.88 58.93 2.836 2.838 72.03 72.08 3.428 3.430 87.07 87.12 p 1.25 32 1.50 38 1.88 48 2.38 60 2.88 73 q .500 13 .500 13 .625 16 .748 19 .878 22 9 kit consists of split wedges flange and gasket special flanges available on request contact barco www.midstatehose.com

[close]

p. 10

800 421-7051 customer service hotline super g rotary steam joints for rotary syphons sizes 1 1/4 1 1/2 and 2 super g special design features · antimony seals and bearings are standard · two widely spaced bearings for stability greater syphon support and longer wear · available in quick-release flange assembly or threaded sleeve · external seal wear indicator for preventive maintenance · all wear surfaces are treated for improved corrosion resistance · directly interchangeable with competitive designs · seal under compression design can better handle pressure surges and promotes longer life joint size 1 /4 1 super g part number bc-55000-20-62 bc-55000-24-62 bc-55000-32-62 a thread npt 1 /4 1 1 1/2 2 1 1/2 2 b syphon 10.45 265 10.67 276 12.02 305 c 8.54 217 8.87 225 9.46 240 d 4.38 111 4.75 121 6.00 152 e 3.48 88 3.63 92 3.20 81 f h thread syphon g npt 9.00 8.85 3 /4 229 225 9.35 9.31 3 /4 237 236 10.01 10.08 1 1/4 256 256 j thread npt 1 /2 /4 /4 3 3 x .34 8.6 .34 8.6 .41 10 flange detail for gr grx and super g joint size 1 1/4 1 1/2 2 2 1/2 3 part number 10-64034-43 10-64035-43 10-64036-43 10-64037-43 10-64038-43 j .62 16 .69 17 .75 19 .88 22 .94 24 k .56 14 .56 14 .56 14 .56 14 .69 18 l 5.50 140 5.50 140 6.81 173 6.75 171 8.00 203 m 3.50 89 3.58 98 4.75 121 4.75 121 6.75 171 n 1.620 1.622 41.15 41.20 1.870 1.872 47.50 47.55 2.318 2.320 58.88 58.93 2.836 2.838 72.03 72.08 3.428 3.430 87.07 87.12 p 1.25 32 1.50 38 1.88 48 2.38 60 2.88 73 q .500 13 .500 13 .625 16 .748 19 .878 22 kit consists of split wedges flange and gasket special flanges available on request contact barco 10 www.midstatehose.com

[close]

p. 11

614 864-1811 columbus customer service e-75 rs and e-75 rsx series for rotary syphons sizes 2 2 1/2 and 3 the e-75 rs and e-75 rsx extra life series incorporate state-of-the-art sealing technology for use on water applications this product is primarily used in the printing paper rubber plastics and steel processing industries special design features · dry run capability · silicon carbide to carbon graphite mechanical seals · for abrasive applications silicon carbide to silicon carbide mechanical seals · available in mono-flow and duo-flow configurations · seals are user replaceable · sizes from 3/8 to 2 · available in us and metric thread specifications maintenance the only maintenance required of the barco e-75rs and e-75rsx series is occasional lubrication of the ball bearings do not over-lubricate part numbers shown are for joints used at temperatures up to +225°f 107°c for joints rated up +350°f 177°c change the part number suffix from -01 to -04 please specify service conditions when ordering ratings pressure temp rpm /8 1/2 3/4 sizes 3500 rpm 1 size 3000 rpm 1 1/4 and 1 1/2 sizes 2500 rpm 2 size 750 rpm for larger sizes see e-75rs 2 1/2 e-75rs 3 150 psi 10.5kg/cm2 +225°f 107°c -01 part num suffix +350°f 177°c -04 part num suffix 3 mono-flow water rotary union duo-flow water rotary union www.midstatehose.com 11

[close]

p. 12

800 421-7051 customer service hotline joint size 3 /8 1 /2 3 /4 1 1 1/4 1 1/2 2 e-75 rs part number bc32000-06-01 bc32001-06-01 bc32002-06-01 bc32003-06-01 bc32100-06-01 bc32101-06-01 bc32000-08-01 bc32001-08-01 bc32002-08-01 bc32003-08-01 bc32100-08-01 bc32101-08-01 bc32162-08-01 bc32163-08-01 bc32000-12-01 bc32001-12-01 bc32002-12-01 bc32003-12-01 bc32100-12-01 bc32101-12-01 bc32162-12-01 bc32163-12-01 bc32025-16-01 bc32026-16-01 bc32034-16-01 bc32035-16-01 bc32100-16-01 bc32101-16-01 bc32162-16-01 bc32163-16-01 bc32000-20-01 bc32001-20-01 bc32002-20-01 bc32003-20-01 bc32100-20-01 bc32101-20-01 bc32000-24-01 bc32001-24-01 bc32002-24-01 bc32003-24-01 bc32100-24-01 bc32101-24-01 bc32162-24-01 bc32163-24-01 bc32002-32-01 bc32003-32-01 bc32108-32-01 e-75rsx part number bc33000-06-01 bc33001-06-01 bc33002-06-01 bc33003-06-01 bc33100-06-01 bc33101-06-01 bc33000-08-01 bc33001-08-01 bc33002-08-01 bc33003-08-01 bc33100-08-01 bc33101-08-01 bc33162-08-01 bc33163-08-01 bc33000-12-01 bc33001-12-01 bc33002-12-01 bc33003-12-01 bc33100-12-01 bc33101-12-01 bc33162-12-01 bc33163-12-01 bc33025-16-01 bc33026-16-01 bc33034-16-01 bc33035-16-01 bc33100-16-01 bc33101-16-01 bc33162-16-01 bc33163-16-01 bc33000-20-01 bc33001-20-01 bc33002-20-01 bc33003-20-01 bc33100-20-01 bc33101-20-01 bc33000-24-01 bc33001-24-01 bc33002-24-01 bc33003-24-01 bc33100-24-01 bc33101-24-01 bc33162-24-01 bc33163-24-01 bc33002-32-01 bc33003-32-01 bc33108-32-01 thread a /8 18unf-2a r.h 5 /8 18unf-2a l.h 3 /8 18npt r.h 3 /8 18npt l.h 3 /8 bsp r.h 3 /8 bsp l.h 3 /4 16unf-2a r.h 3 /4 16unf-2a l.h 1 /2 npt r.h 1 /2 npt l.h 1 /2 bsp r.h 1 /2 bsp l.h m22 x 1.5 r.h m22 x1.5 l.h 1 14uns-2a r.h 1 14uns-2a l.h 3 /4 npt r.h 3 /4 npt l.h 3 /4 bsp r.h 3 /4 bsp l.h m35 x 1.5 r.h m35 x1.5 l.h 1 npt r.h 1 npt l.h 1 1/2 12 unf r.h 1 1/2 12 unf l.h 1 bsp r.h 1 bsp l.h m35 x 1.5 r.h m35 x1.5 l.h 1 3/4 12 un-2a r.h 1 3/4 12un-2a l.h 1 1/4 npt r.h 1 1/4 npt l.h 1 1/4 bsp r.h 1 1/4 bsp l.h 2 12un-2a r.h 2 12un-2a l.h 1 1/2 npt r.h 1 1/2 npt l.h 1 1/2 bsp r.h 1 1/2 bsp l.h m50 x 1.5 r.h m50 x1.5 l.h 2 npt r.h 2 npt l.h quick release 5 b .50 12.7 .56 14.2 .56 14.2 .69 17.5 1.00 25.4 .75 19.1 .62 15.7 .69 17.5 1.00 25.4 .75 19.1 .62 15.7 1.12 28.4 1.12 28.4 .87 22.1 1.12 28.4 1.13 28.7 1.13 28.7 1.13 28.7 1.06 26.9 1.13 28.7 1.14 28.9 .87 22.1 1.19 30.2 c .38 9.6 .38 9.6 .38 9.6 .50 12.7 .50 12.7 .50 12.7 .50 12.7 .66 16.7 .66 16.7 .66 16.7 .66 16.7 1.00 25.4 1.00 25.4 .88 22.4 1.00 25.4 1.25 31.7 1.25 31.7 1.25 31.7 1.50 38.1 1.50 38.1 1.38 35.1 1.50 38.1 1.75 44.4 d 3.32 84 3.32 84 3.32 84 3.90 99 4.19 106 3.96 101 3.83 97 4.44 113 4.75 121 4.50 114 5.00 127 5.46 139 5.46 139 5.46 139 5.46 139 6.00 152 6.00 152 6.00 152 6.48 164 6.54 166 6.48 164 6.54 166 7.73 196 e .91 23 .91 23 .91 23 1.13 29 1.13 29 1.13 29 1.13 29 1.44 37 1.44 37 1.44 37 1.44 37 1.62 41 1.62 41 1.62 41 1.62 41 1.78 45 1.78 45 1.78 45 1.84 47 1.84 47 1.84 47 1.84 47 2.31 59 f 1.81 46 1.81 46 1.81 46 2.25 57 2.25 57 2.25 57 2.25 57 2.88 73 2.88 73 2.88 73 2.88 73 3.25 82 3.25 82 3.25 82 3.25 82 3.56 90 3.56 90 3.56 90 3.68 93 3.68 93 3.68 93 3.68 93 4.62 117 l 3.99 101 3.99 101 3.99 101 4.69 119 4.98 126 4.75 121 4.62 117 5.44 138 5.75 146 5.50 140 6.00 152 6.89 175 6.89 175 6.89 175 6.89 175 7.69 195 7.69 195 7.69 195 8.19 203 8.07 205 8.01 203 8.07 205 9.97 253 p r /8 npt 3 /4 npt 1 /4 npt 3 /2 npt 1 /4 npt 3 /2 npt 1 1 111/2 3/4 npt npt 1 1/4 npt 1 npt 1 1/2 npt 1 npt 2 npt 1 1/4 npt all dimensions in inches for larger sizes see e-75rs 2 1/2 e-75rs 3 note special or extended sleeves are available consult the factory note bsp threads conform to iso r288 and din 259 for parallel pipe threads 12 www.midstatehose.com

[close]

p. 13

columbus 1101 gahanna parkway columbus oh 43230 tel 614 864-1811 fax 614 864-0435 cleveland 21562 alexander road cleveland oh 44146 tel 440 439-8300 fax 440 439-0286 cincinnati 629 old state rt 74 ste.100 cincinnati oh 45155 tel 513 563-2777 fax 513 563-2770 youngstown youngstown rubber products 854 mahoning avenue youngstown oh 44501 tel 330 744-2158 fax 330 744-0800 customer service hotline 800 421-7051 614 864-1811 for fast quotes ez order placement and technical assistance 24 hour order fax line 614 864-0435 www.mids ta te hos e.com copyright 2010 mid-state sales inc printed in usa

[close]